OpenAZBox PLiMOD HD Prerelease 2 Premium, Ultra, Elite Kernel 3.4.4

[zeini]

OpenAZBox PLi MOD HD Prerelease - 2 -

Enigma 2 of 11. august 2012

Drivers of 11. august 2012

Kernel of 11. august

Changes:

- 2nd Fix for 0/12V Output (confirmed by zeini -> OK)

- 2nd Fix for 2 x record in same time from same TP (confirmed by zeini -> OK)

- Correct mount point for HDD, to solve recording and timeshift problem

Download (http://www.mediafire.com/?y7s2bi6xwmag1st) OpenAZBox PLi MOD HD Prerelease - 2- Enigma 2 Image


Flash this image only with AZUp 2.2.5 which you can download (]http://www.mediafire.com/?qkh8kiunre09qv9)

[zeini]

Now not implemented:

Blindscan
CI-Modul
Card reader not accessible
AV Settings Pan&Scan and pillarbox do not work

Bug:

Recordings and Timeshift coils up to 128 times is good. Rewind, but no matter, equal what setting is only about 2 times and then stops it after some time. But with 1/4/7 and 3/6/9 jump well.
Some movies (avi, mpg) will not work for me. Maybe this is better, if we get AZPlayer.
Sometimes, but very less tone is sibilant. If I change the channel and go back tone is clear.
Softcam will not start automatically at start. Workaround
put the emu's manually into required folders and start them via telnet;
if you're capable of making scripts (or if you got hold of them extracting from .ipk), you can use the RTi Panel to start your emu's
and finally, once you run Emu via the RTi Panel, give the following command via telnet to enable autostart:

update-rc.d softcam defaults
Make a restart and it will work without a need for manual starting! (thx go to user @kess for sharing this)
Systemdate and time is wrong. So also program-time is wrong. workaround (http://forum.openazbox.info/viewtopic.php?p=792#p792)
No EPG - only in Infobar workaround (http://forum.openazbox.info/viewtopic.php?p=792#p792)
Not a bug - but limitations. Additional recording on the same transponder is now possible, but only for 2 channels. With second tuner also OK on Premium+, if this recorded programme is at an other transponder. Also looking a third programme no problem, even if all 3 programmes are HD channels. I have also tried to record 4 SD channels at same time (two on each transponder) and looking a fifth. Recording 4 programmes and looking the fifthty also here was no problem. But sometimes there are problems to stop this recording (duration wheels).
0/12V output for LNB-Control is implemented. Now you can find it in Menu > Setup > System > Customize. But this entry should be in Menu > Setup > Service Searching > Tuner configuration > for all tuners that are available. Only in this menue I can set the right adjustment automatically, if I choose an other satellite in channellist.