PDA

View Full Version : 5200D Power troubles?



barrykap
27-08-2012, 01:26 PM
For a long time now, my 5200 D USB occasionally fails to power up first time.

The front display never shows any 'bars' and nothing happens. I find removing power again and re-powering freed it up and it then powers up fine,

This has gone on for over a year, about once very 12 power-ups.

However, now it fails to power at all and shows a scrolling series of bars. (ie instead of the steady four bars while it booted, they were scrolling left to right).

It would not boot up at all unless I removed the LNB connection, then it booted up OK. Replacing the LNB and it went back to scrolling bars.

there is nothing wrong with my LNB feed as i have tried all sorts of combinations to test things and it is definitely the receiver.

I suspect it is the power supply.

Checking the PSU I can see nothing really wrong except just a tiny bit of 'gunge' at the base of the large capacitor (33uf 450V).

Could it be this cap causing the trouble?

I need to get a reasonable confirmation as these caps cost around £10 inc postage etc.

Cheers.