blackhole 1.7.8

[vamas]

I am going to install BH for the first time on my new vu+ solo.
The BH is 1.7.8

Do I need to load again the bootloader and if so were can i find this file.



thanks

[sonic1]

If the images loads OK then it's not needed.

If your box is a clone then it won't work.

But if you want to install it anyway it won't hurt as long as your box is original.

Here is the link and info


http://www2.vuplus.com/image-release/106-how-to-update-vu-solo-cfe

[vamas]

@sonic1.

first of all many thanks for your helpful and quick reply.
I bought this box a an original. I still have to find out hopefully as soon as I flash this BH. Up to now it has the vu+ original software.
I have tried to set it up my present discq 1.2 system which I used via vbox but failed to get it to work. Now i realize that maybe I shall go to the advanced part. I will try this when I get chance to and if I get stuck again, I will probably have to come back to you again - cheeky me

thanks again vamas

[pixey]

V-box works great with vu+ UNO. If you look in the "dummies" guide above, Lee has explained how to do it really well.

pixey

[clipper]

@sonic1.

first of all many thanks for your helpful and quick reply.
I bought this box a an original. I still have to find out hopefully as soon as I flash this BH. Up to now it has the vu+ original software.
I have tried to set it up my present discq 1.2 system which I used via vbox but failed to get it to work. Now i realize that maybe I shall go to the advanced part. I will try this when I get chance to and if I get stuck again, I will probably have to come back to you again - cheeky me

thanks again vamas
********************************* *
for me the v172 media tree blackhole images is the best very stable image
and with anything above 1.7.2 on blackhole do not gain much of value except the extra universe and the hbbtv thats for the german channels

[vamas]

A big thanks to all especially Lee for his simple instructions which also applied very well for Bh 1.7.8.

Nest problem - I just cannot figure out how to get cccam.
I have done readings and readings and am still completely in the dark.
Can someone please direct me to a simple method of how to do it. I have goggled several ways but still as stupid as when started.

[DCG]

down load the ccamd you want from here
https://www.satpimps.co.uk/showthread.php?142280-VuPlus-Community-Black-Hole-Image-EMU-S

use dcc or wat ever your used to to ftp to temp than gerren button)yellow button manual install bh packages and sellect the one you d/lded and install

[sonic1]

https://www.satpimps.co.uk/showthread.php?142280-VuPlus-Community-Black-Hole-Image-EMU-S&p=826537&viewfull=1#post826537

Download from the above link, FTP to tmp and then manual install from the image via the green button the yellow

[DCG]

then blue button and select the 1 you want and press ok

[vamas]

@Sonic1 & DCG
I have downloaded CCCam 2.3 to pc.
I suppose now i have to put file on usb (vuplus / solo - cccam file)
Put this in receiver and press green and yellow button, install the file off usb.
Is this the procedure or is there more to it?
thanks for yr help

[vamas]

@moderator

Can you please put this thread under vu solo as I just noticed that I had started this in the vu uno by mistake.

apologies and thanks

[DCG]

post 8
post 7
post 9

[vamas]

I am afraid i am still stuck completely and now my box has changed language to German (?)., so I need to know how i can change this back!

thanks

[vamas]

Has to re install BH 1.7.8. so now I have to set up all sats again as using vbox and dicq 1.2,
I still have no idea how to install CCcam. I need a fools detailed instructions no technical references I am afraid to say.
I have to download file (OK) , FTP to tmp and then manual install ???stuck here

[ian]

@Sonic1 & DCG
I have downloaded CCCam 2.3 to pc.
I suppose now i have to put file on usb (vuplus / solo - cccam file)
Put this in receiver and press green and yellow button, install the file off usb.
Is this the procedure or is there more to it?
thanks for yr help

read DCB's post number 7 and sonics post number 8 again

where they have both told you to FTP the file to /tmp NOT TO YOUR USB !!
then manually install using the green button,followed by the yellow button then selecting manual install of ipk

then read DCB's post number 9 again where he tells you to press the blue button the using the left and right buttons you select the newly installed cam,then press the ok button for the cam to start.

you then need to add your C lines to the cccam.cfg that you will find in /etc

Ian.

[vamas]

@IAN,
First of all thanks for your assistance

how do I ftp file to /tmp/ this is were I am stuck!

[sonic1]

You need an FTP program which can find in VuControl Centre which has every tool you need.
https://www.satpimps.co.uk/showthread.php?153650-VuCC-Vu-Control-Centre-V0-5

[vamas]

OK,

I think I have solved this out.
I have downloaded DCC 2.95 and should manage. This is what I was missing.....

[DCG]

is that E2


try this one

https://www.satpimps.co.uk/showthread.php?155335-Latest-Version-of-DCC-E2-v1-50

[eugene5086]

Hi

I have followed all the instruction within these posts but i still cannot get the cccam to work. i had the .cfg and the ipk files which were used when the solo was loaded with a vix image. This worked fine. There was no more to do with the vix but these two files. i have since uploaded this file CCCam_2.3.0_FULL_E2_bh.tgz but when i hit the blue button to the BH Blue Panel screen, its not listed. Has anyone any ideas.

Eugene

[hda5]

ftp CCCam (https://www.goldwafers.co.uk/CAMS/)_2.3.0_FULL_E2_bh.tgz to the /tmp folder
Then press the Green Button followed by the Yellow button
Then select install blackhole package and select the CCCam (https://www.goldwafers.co.uk/CAMS/)_2.3.0_FULL_E2_bh.tgz from the list and press OK to install.

Once it's installed restart and you'll see CCcam in the blue panel.