Icecrypt s4000 help

[annette1327]

Hi, where do i start, I tried to install E2 image on box and bricked it, the only way I could get anywhere was to install image from AAF recovery tool which has left me with an Atevio A7000 image installed.

I can connect box thru AAF app thru serial cable but cannot connect porter express to install Flash.v3.ICECRYPT.S4000HDPVR.ird image.

Any help would be appreciated

Kind Regards annette11327

Had enough of this box REMOVED BY ADMIN - READ THE RULES AGAIN

[blakmumba]

If you HAVE managed to install maxiflasher then porter express will NOT work. Try using porter express steps 1st and if that dosn't detect yr ice then use aaf recovery tool. Hope it works for ya :)

(Porter Express)

>Switch off icecrypt from mains or toggle switch from rear
>Connect icecrypt to com port on pc
>Run porter express (run as admin on win 7)
>Choose software from drop down box
>Hit 'Browse' and Choose flash cleaner you downloaded for your box
>Hit 'Download'
>Switch on receiver from the mains or the toggle switch on rear of receiver
>Wait for 'Complete' to show on display on icecrypt and porter express
>Power down icecrypt and back on
>Wait for the 'erase' and 'write' to complete on icecrypt (100%)
>Once completed go into icecrypt main menu, select System Recovery and System restore to factory default.
>Power down Icecrypt and switch receiver off from mains or toggle switch on rear
>Hit browse and now select the firmware file for your box on porter express
>Hit 'download'
>Switch on receiver from the mains or the toggle switch on rear of receiver
>Wait for 'Complete' to show on display on icecrypt and porter express
>Power down icecrypt and back on
>Wait for the 'erase' and 'write' to complete on icecrypt (100%)
>ALL DONE

(AFF Recovery)

>Power off Icecrypt and connect icecrypt with a null modem cable to a com port
and a ethernet lead to your router
>Select correct com port on main settings page on AAF Recovery
>Press connect button
>Power on Icecrypt and wait for connection
>Fill in correct ip addresses in the given fields
>Once connected press Save
>On the top tabs choose 'Re-seller id
>Under 'select re-seller id' choose Atevio AV7000
>Click 'Set Re-seller id'
>Now select 'Recovery Image' on the top tab
>Press Start
>Once finished, choose 'Re-seller id' and change back to 'Icecrypt s4000' and hit Save
>Download Flashcleaner and install via usb or porter express (recommended)
>Once completed and box has rebooted, on Icecrypt main menu, select System Recovery and System restore to factory default.
>Download Icecrypt firmware and install via usb or porter express (recommended)
>ALL DONE

[ManikM]

haha, whoops!

the solution is simple.

flash the bootloader with the icecrypt boot loader (in here somewhere) - its available as a plugin, or u can do it using porter express.

then once its installed, just flash it with the usual icecrypt f/w in the usual fashion.

£115 is far too cheap, i sold mine for £190 earlier this year with a 320gb disk in.

keep the faith, and dont get desperate

[blakmumba]

Picked mine up for £100 with 1TB :)

[annette1327]

Hi, where do i start, I tried to install E2 image on box and bricked it, the only way I could get anywhere was to install image from AAF recovery tool which has left me with an Atevio A7000 image installed.

I can connect box thru AAF app thru serial cable but cannot connect porter express to install Flash.v3.ICECRYPT.S4000HDPVR.ird image.

Any help would be appreciated

Kind Regards annette11327

Had enough of this box REMOVED BY ADMIN - READ THE RULES AGAIN

Big thanks guys, I'm back to Icecrypt firmware but I think I will still sell box, I am running an Openbox S11 with MGCAM perfectly,
this Icecrypt freezes all the time when running MGCAM, I thought E2 image might have helped this that is why I got in all this trouble.

BIG THANKS AGAIN annette1327 :respect-044:

[ManikM]

i used to run OSCAM without issues on my E2 image.

well, i couldnt only decrypt one channel at a time having thouhgt about it.