TM 1500CI+ Canal +ned 19e and Bulsat 39e neither will open

[oscar]

I am tearing what is left of my hair out !!
As in the title --- I can't open either of these .
Have downgraded the Patches to 308p ,306p,312p,315p, and am currently on 316p and reloaded the key files every time but stiil can't open either of these.
Before posting this I have tried by reading to answer my own question but can't find an answer.
Any help would be appreciated please.
Thanks.
Regards

[sat_rrstm]

C+NL Irdeto channels have all gone except NED1 & NED2,but the active keys are not public atm,
as for bulsat there was a key-change yesterday,so don't use any older softcam...

[Mickha]

Also the keys only open the Irdeto 2 encrypted channels, and there aren't that many left.

[oscar]

Thank you both for the replies --- I would just like to open ANY of them to make sure I am not doing anything wrong.
I used to be able to open Bulsat but never C+
Regards

[holmroad]

C+NL Irdeto channels have all gone except NED1 & NED2,but the active keys are not public atm,
as for bulsat there was a key-change yesterday,so don't use any older softcam...

These two had also gone last time I looked last week mate - unless of course they keep bringing them back again?:confused:

[holmroad]

Thank you both for the replies --- I would just like to open ANY of them to make sure I am not doing anything wrong.
I used to be able to open Bulsat but never C+
Regards

I thought Bulst Irdeto 2 channels should still open on yours mate, always assuming you use latest patch with very latest softcam?:confused:

[oscar]

Holmroad.
So would I this is what is confusing me .
They just don't open anymore -- I am on 316p and latest key file I can find .
I think I'll go back to the one that worked for ages, 315p, and see what happens .
Maybe all the patch changing has confused the dear old girl....
Tempted to revert back to the last Technomate file and start again .........
Thanks for your reply .
Regards

[ekon]

have you tried deleting the relevant transponders (or the whole bunch of channels on that satellite ) and then re-scanning?

[oscar]

ekon.
No have not tried that --- thanks .
Regards

[oscar]

No that didn't work ---
Could someone who has a TM1500CI+ post the frequency and what softcam file you are using to open ANY channel on 39E please to give me something to work with as I appear to be stabbing around in the dark right now.
Then I'll go away until the MotoGP season starts again.
Many thanks.
Regards

[oscar]

39 E back up and running --- the signal has always been marginal where I live not helped by a metal clothes line post smack bang in line with the dish .
39E did not exist when I installed it --- dish had moved on it's mount pointing it higher than it should have been.
19E clearing has never worked for me .......
Thanks for your help and suggestions .
Regards

[moulin]

I've just resurrected my 1500 and changed the Darkman Patch (v 2.77) to Phantom Patch 316.

I was half hoping that with a set of Softcam keys I'd be able to watch TNTsat on it, but sadly it doesn't seem to want to work. Ditto the Swiss channels on 13 deg E.

However, something must still be right because the Austrian ORFs on 19 deg E are clearing.

Am I expecting too much for a box as long in the tooth as this? Does anyone have any success with it?

Thanks.

[TonyO]

TM1500 (316) on espn 15W works ok with biss keys along with diema/nova sport on 39e, I'll check what else is going and come back to you.

TM softcam files are still available and kept updated if you hunt around, channels clearing in the packages below, I don't know if C+ Ned still clears

SkyLink (23.5E) > OK <
TV Globo (13.0E) > OK <
Bulsatcom (39.0E) > OK <
ORF / AUS (19.2E) > OK <
SRG / SSR (13.0E) > OK <
SIC International (16.0E) > OK <

[moulin]

Thanks - in fact I found I'd loaded 3.15 not 3.16, so I updated it and I've now LOST ORFs, so inverse progress on that one!!

Probably not possible, but if you find anything on 19 or 13 E that works it would at least tell me if I'm doing something wrong!

Thanks - appreciated.

[TonyO]

I think you might lose the key file when you update the patch.

[TonyO]

C+ Ned is gone from 19e to 23.5e, ned 1 to 3 etc on 19e don't seem to clear with the old irdeto AU card so it must updated the encryption.

[mdt]

SkyLink (23.5E)
TV Globo (13.0E)
Mezzo (13.0E)
Bulsatcom (39.0E)
ORF / AUS (19.2E)
SIC International
N*S V**SAT (4.8E) .


all these are ok on my TMS1500.... C+NED has been down along time and TNTSAT/SRG dont work and i cant see a patch coming anytime soon as the TM5400 series doesnt get anymore updates. theres still MGM/ESPN ect via b*** aswell so still a good selection from a very old sd stb imo,regards mdt

[moulin]

Thanks everyone.

Well Mezzo is certainly working so it's probably that I've got an out of date softcam set; TV Globo isn't working for me but I'll update again and see what comes in.

Appreciate the help and support, thanks for the PM TonyO.