New Phantom Patch 751P - Feedback

[holmroad]

Please post your feedback on the new Phantom Patch 751P so we can all share in our findings - as ALWAYS!!:number-one-043:

[Italtony]

Ahh finally, well we now do not need to test or bother about Canal+ NL since the package has now ceased Irdeto 2 transmissions R.I.P. it was great while it lasted now all we can hope for is that Mediaguard will be sorted for that package but don't have much hope for that happening....anyways happy testing to everyone

[Italtony]

Has no one tested this version yet or has everyone just given up?

[holmroad]

Yes mate, I have tested this patch - and SO far its the best yet!

All 8281 use is now solved on all packages
SCT HD on 13E still freezes first time you try, but after going off channel and back it works perfectly.
PLTV HD on 10E still jerks a little, but very spasmodically so its NEARLY there!
All other features are pretty good when using my TM6900HD Super with latest patch 751P mate!:cheers2:

[beamobhoy]

@holmroad - hey - how do you know PLTV still jerks??!!!! Something you want to pass onto a fellow 6900 user mate??! :cheers2:

[fman]

Testing epg recording now, will post results.

[Italtony]

Looks like that we are finally on a winner...

Can anyone confirm if TNTsat France 19E is now working without any freezing? This is impolrtant for me if that works I wil load this version...

[fman]

Recording from epg now working again:)
Receiver still reboots when left too long on channel for downloading sky 7 day listings.

[fman]

Pause live tv doesn't work, doesn't resume where left off, reverts to live tv and can't rewind.

[holmroad]

Well I did a 'live pause' no problem yesterday - I hadnt realised it still workrf mate!:number-one-043:

[Italtony]

Anyone tested TNTsat France at Astra 19East yet..?

[bamber]

Anyone tested TNTsat France at Astra 19East yet..?
I tried it for just a short time yesterday and there was no freezing, so hopefully it has been fixed. I could no longer clear ARTE HD though, with either the patch or my Diablo 2 CAM.

[Italtony]

Thanks bamber.....when I get a chance I wil load this version...finally!

[joany]

Pause live tv doesn't work, doesn't resume where left off, reverts to live tv and can't rewind.

I am still using 426p and the pause live tv seems not to work on this too. However I realised that once live tv is paused (with the pause button) you don't hit the play button to continue but you hit the pause button again to restart from where you paused. maybe you could try this and confirm if it works ok with the new patch.

[stroker]

I tried pause live TV and at first I found it did not work properly.
There is a problem when Auto Timeshift is enabled which prevents playing recordings.
The files are listed but no audio or video is shown.

Went back to 426p and it still didn't work but found it worked with a flash drive but not a hard drive.
Did a factory reset, tried hard drive again.
A disc check ran automatically.
Live pause then worked.

I went back to 751p, did a factory reset and loaded my saved channels
Live pause now working and can resume with pause or play button.
Revert to live using right arrow with RH vertical line button on the left of record button.

So it would seem a factory reset and/or running a disk check may solve the problem.
I later found that it had stopped working because I had enabled Auto Timeshift, disabling it got it working again.

[stroker]

Sorry it's not that simple.

It goes to live TV again when un-paused.

[joany]

Sorry it's not that simple.

It goes to live TV again when un-paused.
Even if you 'unpause' it using the pause button?

[stroker]

Yes i'm afraid so, even with the pause button.
It worked for a while and then it went to live tv when unpaused I haven't worked out what caused it.
Even with the auto-timeshift disabled it sets up a cache on the disc when you pause.
You can then move the slider but it goes back to live tv when you release the slider.

I have tried 746p and 748p which do the same.
I tried 726p and as you say that seems to work fine.
I also tried an unpatched 747 and that was ok too.

I was wondering what we would miss if we used the unpatched 747 and loaded the add-on.
I use softcams but not C.S. so I might give it a try.

[stroker]

OK so it looks like the add-on doesn't do what I thought it did!

It looks like the live pause works properly in 747p
I have only just loaded it but it looks good to me.
Perhaps sombody else can try it to confirm it works.

This is strange since it doesn't work in 746p or 748p.
Perhaps the problem was fixed in 747p and somehow got lost in later versions.

[holmroad]

Just recorded League of Their Own on Sly1 HD via EPG option, plus live pause still working fine - ALL on patch 751P - so well done so far Phantom!
Gosh its SUCH a long time since I DIDNT have to revert to patch 726P - yes guys 726P and NOT 426P!! lol!!!:number-one-043:

[Disco Man]

TM-6900 HD Combo Super can't mantain the frequency 12437/H/27500 of B4U Movies on 7w Nilesat.If you turn off the receiver and back on.The picture stays on for a while then drops saying no or bad signal.I've tried different firmware plus the official one,still the same problem.With Dream Box 8000 the signal doesn't prop.This seems to be a problem for TM-6900 HD.
Can someone find out why and let us know please?

[holmroad]

TM-6900 HD Combo Super can't mantain the frequency 12437/H/27500 of B4U Movies on 7w Nilesat.If you turn off the receiver and back on.The picture stays on for a while then drops saying no or bad signal.I've tried different firmware plus the official one,still the same problem.With Dream Box 8000 the signal doesn't prop.This seems to be a problem for TM-6900 HD.
Can someone find out why and let us know please?

This sounds like a classic situation where you MAY not have carried out the 'preferred' procedure when loading a patch mate?
My argument is that so far nobody else has reported this problem, so may I ask exactly 'how' did you load the patch 751P mate - i.e. did you load it straight on?:grouphug:

[Disco Man]

Using a memory stick,via usb then data transfer.But there's no problem with other frequencies,only this one,12437/H/27500 It can't handle it.If you reboot the receiver it stays on for a while then it goes off.When you change to a different frequency it works fine.

[holmroad]

Using a memory stick,via usb then data transfer.But there's no problem with other frequencies,only this one,12437/H/27500 It can't handle it.If you reboot the receiver it stays on for a while then it goes off.When you change to a different frequency it works fine.

But you havent tried the majority add patch procedure yet - if not just to prove us wrong mate?:number-one-043:

[Disco Man]

What do you mean by the majority add patch procedure?
I found out nothing wrong with patch that frequency 12437/H/27500 interferes with the right frequency 12417/H/27500 for B4U Movies which works fine.I have no problem now.All you need to do is delete 12437/H/27500 and add 12417/H/27500 problem solved.But Still I need know about the majority add patch procedure please.

[holmroad]

What do you mean by the majority add patch procedure?
I found out nothing wrong with patch that frequency 12437/H/27500 interferes with the right frequency 12417/H/27500 for B4U Movies which works fine.I have no problem now.All you need to do is delete 12437/H/27500 and add 12417/H/27500 problem solved.But Still I need know about the majority add patch procedure please.

Wat I'm trying to say is that many of the problems CAN be caused by placing patch after patch on top of each other, without taking steps to try to prevent ac***ulation of corruptions/rubbish created in between patches - and we've certainly had enough patches this past 12 months? lol!!
Many of us recommend the following procedure before loading any new patch:-
1) First back up Channel List (red button)
2) Factory Reset
3) Load 'basic' TM firmware (latest ex TM I can find is number 748 - WITHOUT the 'P'!)
4) Factory reset
5) Load latest patch (751P on TM6000 Super Series)
6) Load Add-on
7) Factory reset
8) Load latest softcam
9) Load backed up Channel List from 1) above

See how you go - this procedure actually applies to ALL non-linux TM receivers - what do you lose by using it - and just remember how much you MAY gain just by taking a little more trouble EVERY time you load a new patch!!:respect-055:

[Disco Man]

Thanks for the info

[Disco Man]

Where can I find Add-on file and TM 748 official one?

[sat_rrstm]

Where can I find Add-on file and TM 748 official one?

1 : https://www.satpimps.co.uk/showthread.php?152488-TM6000-7100-Series-Add-on-file
2 : https://www.satpimps.co.uk/showthread.php?157539-Original-Firmware-for-TM-Offıcıall
pick the last one.(no official 748 yet,747 version is the latest)

[holmroad]

Thanks mate, but as matter of interest here's two LATER files for the same thing - these are actually the very LATEST Add-on as well as Original firmware for TM6000HD Soper Series, both of which I personally used when loading the latest patch 751P!!:respect-037:

[sat_rrstm]

Thanks mate,but if you go in the official site here :

http://www.technomate.com/support/tm-6900-hd-combo-super.html
you can only find the 747 version,so where did you get that 748 one?

[Disco Man]

Thanks guys for the feedback

[holmroad]

Thanks mate,but if you go in the official site here :

http://www.technomate.com/support/tm-6900-hd-combo-super.html
you can only find the 747 version,so where did you get that 748 one?

Cant remember mate, but thought it was on the official TM site?:respect-013:

[wilfreado]

hello...how can i update to this patch with serial cable?

[holmroad]

This is the wrong patch anyway mate - you need to update with patch 752P and NOT 751P!
Use the Darkman downloader from the 'TM Tools' section on here!:cheers2: