sorry wrong image in flash found............

[bigkenny]

Hi,

I`m trying to upgrade from a working system (VU+ Duo with BH 1.7.2 running CCcam v2.1.4) I`m trying to update to BH 1.7.9
I`ve installed the new BH 1.7.9 it looks OK running ok but when I`ve installed the cccam as normal (as installed on BH 1.7.2)
when I come to press the blue button to run the cam (or even reboot) its not running the cam a message comes up saying

Sorry. Wrong image in flash found You have to install in flash.
Blackhole image v.1.7.2

I`ve tried the normal way running TSpanel download the cam and run it to install, this is the way I`ve always run/installed it in previous BH
I`ve also even tried to install via VU+ Control Centre install cccam to temp folder and run from there but the out come is still the same Sorry wrong image.

I`ve even tried to go back to square one run orginal VU+ image then work up to BH (also installing the memory update

Rev. 3.0

- Increase the update usb file size to 128M Bytes
- Change the flash memory map(kernel size : 4M, /boot : 2M)

Then run BH but again no good on 1.7.9

I`ve gone back to 1.7.2 and installed cccam again its all working fine so can any kind sole help me with this 1.7.9 upgrade :confused:

Thanks

PS

I checked the bootloader seems OK this is what it says

root@bm750:~# cat /proc/mtd
dev: size erasesize name
mtd0: 07600000 00020000 "rootfs"
mtd1: 00400000 00020000 "kernel"
mtd2: 00400000 00020000 "boot"
mtd3: 00100000 00020000 "cfe"
mtd4: 00080000 00020000 "mac"
mtd5: 00080000 00020000 "env"
mtd6: 00100000 00020000 "nvm"
root@bm750:~#

[sonic1]

Have you carried out CFE update ?

[sonic1]

Here is the info


http://www2.vuplus.com/image-release/108-how-to-update-vu-duo-cfe

[bigkenny]

yes i`ve done this but still the same.

I`ve gone back to 1.7.2 again. Its working with cccam 2.1.4 and TSpanel all OK.

can you give me a start to finish in what order I should do this install. i`ve tried to do what has worked in the past but its still saying when I try to get the cam working (pressing blue button to start cam) Sorry wrong image in flash found, you have to install in flash.BH image v 1.7.2

It looks like BH 1.7.9 has been installed showing a different start up and different options in menu (like the weather plug in) so it working all ok freesat etc all pic ok it just this cccam bit I`ve tried doing install via TSpanel and also tried install via temp then using green/yellow buttons to install the file. It says its installed. Also when I do press the blue button its showing as installed. But when you press the OK button to run it, thats when the message comes up........... sorry wrong image.......................

[sonic1]

Are you loading the image to flash or multiboot ?

[bigkenny]

Are you loading the image to flash or multiboot ?

do you mean the cccam is not being installed correctly or blackhole/

I`ve tried installing cccam by downloading it via TSpanel and running/installing it from there (same as I`ve done in BH 1.7.2) also I`ve tried to run cccam via using VU control centre moving it over to the temp dir, the cccam file ending in bh.tgz.

Then I`ve run it/installed using the coloured buttons on ther VU+ Duo.

Its the same either way same problem........

Can you just tell me in a A to Z what I should do first and so on.....

Why its different on this BH compaired to the others I`ve done, I`ve no idea

[sonic1]

1. Update CFE as per the link I have already posted.
2. Load the new image directly in to the flash.
3. Add your settings and use CCCam from HERE (https://www.satpimps.co.uk/showthread.php?142280-VuPlus-Community-Black-Hole-Image-EMU-S)

Do not load TS Panel to see eliminate if that is an issue.

[bigkenny]

sorry not had chance to reply just seen your post, I will try what you say, but will have to wait till all family in bed so might take a few days before I get time to get near sat box again as busy working pre-xmas.

Thanks for all your help as soon as I do it i will get back to you, thanks again

Ken

[bigkenny]

Hi,

I seem to have got it working now. I think the main problem was when I installed everything I let the wizzard install all my saved settings. The lot includding the cccam settings. This time I said no and only reinstalled my personal settings not the full settings. My cam was still installed as it still showed up when I pressed the blue button but this time it started and worked. So I used VU+ Control Centre to copy over the cccam.cfg file and its all working again. It showed up in Information/about as Firmware Blackhole 1.7.9

so thanks for your help