DVB-S2 10.0e 11.304 30000 V 4/5 8PSK "Service- 123 HD" PLTV

[stevethejack]

Think it should be in BISS section, but could equally be put in General Sat Chat, apologies if in wrong section

I'm using Vu+Duo with BH 1.7.2

Really confused on this one. Had PLTV working fine before (using constant.cw in usr/keys) they altered the broadcast on the PLTV_enc1 frequency.

Using DVB-S2 10.0e 11.304 30000 V 4/5 8PSK "Service- 123 HD I get no signal, but when I do a search using 5/6 as the symbol rate (as per Lyngsat info), I get a signal of 72% coming in, but it's not clearing, and the display shows a symbol rate of 9/10, even though the search was on 5/6????

Everyone seems to be getting it in on 3/4, but no signal for me and not clearing on 5/6 (or 9/10?). Do I have to alter anything in the constant.cw file while using frequency/symbol rate?

I've seen this:
Also PLTV on 10e
Using same key
Service -123 HD = PLTV
SID HEX: 007B

Is that amending 1FFF to 007B in constant.cw
I've done this still not clearing

Thanks guys

[oaktye]

try changing the sid which was 0006 before to 007b but leave the 1fff as it was

[stevethejack]

Awesome mate - got it back. It was not knowing which part of the line of coding was the SID, you saying it was previously 0006 allowed me back in.

Weirdly when OK pressed twice to get frequency info, it still gived symbol rate as 9/10. Not worried about that bit!!!

Thanks x 1,000

[catchcandy]

this worked for me too after trying all day yesterday to get pltv
big thanks oaktye

[pixey]

How can you change SID on vu+ UNO? As not clearing for me.

Pixey

[dog-man]

You change the sid manually in whatever key file you are using. (softcam perhaps?)


dog-man

[digicon]

How can you change SID on vu+ UNO? As not clearing for me.

Pixey


you dont change it on the Uno you change it in the Constant.cw file where the keys are, the Guys above have pretty much spelt out how to do it

[pixey]

Sorry to be thick dog man but can you please explain further?

pixey

[dog-man]

What do you normally use to clear this channel?

What file do you ftp to your Uno as a key file?


if we know that, somebody can help.


dog-man

[pixey]

I use a key downloader plugin to download keys.

pixey

[dog-man]

Have you tried updating that?

[pixey]

Yes I have but still the same.

pixey

[catchcandy]

In a vu+ go into your constant.cw file rename 0006 to 007f in the pltv line all should work then

[pixey]

Okay thanks I will try that. Can you tell me where I can find the constant.cw file.

pixey

[dog-man]

If it is the same as a Duo.............

Usr/keys/


dog-man

[pixey]

Thanks.

[dog-man]

Working?


dog-man

[pixey]

No, changed that and still not working. Tried softcam.key dated 20.1.13 but still won't clear.


pixey

[simon 2003]

does it look in exactly the same format as the other lines with k*y starting 11 just put anywhere in CW with free line.

2600:000000:007B:03E8:1FFF::11 xx xx xx xx xx xx xx 11 xx xx xx xx xx xx xx ;Service-123HD

ill up my cw later when i get home from work if you cannot clear still

[mister-t]

open your softcam,scroll down to pltv and replace keys with these i have uploaded

[pixey]

The line with Service-123HD does not appear in my constant.cw file.

pixey


does it look in exactly the same format as the other lines with k*y starting 11 just put anywhere in CW with free line.

2600:000000:007B:03E8:1FFF::11 xx xx xx xx xx xx xx 11 xx xx xx xx xx xx xx ;Service-123HD

ill up my cw later when i get home from work if you cannot clear still

[dog-man]

You have to add it because this is a new channel.


dog-man

[simon 2003]

mate just copy and paste that line into it ,with key obviously not x's

[pixey]

I have but still not clearing.

I had this channel service-123HD open on Saturday but it went off during a game in the afternoon and I have not been able to get it back since then.

pixey

[simon 2003]

CW is if your using cccam

I see in the other thread you say your using mgcamd try this in SOFTCAM NOT CW

but if it was working now is not you must have this ?


F 007B1FFF 00 11xxxxxxxxxxxxxx ; Service-123HD (10.0°E)
F 007B1FFF 01 11xxxxxxxxxxxxxx ; Service-123HD (10.0°E)

[pixey]

No. Should I be? I am using mgcamd.

pixey

[pixey]

Do you mean add that ling to the softcam.key file?

If you do, what do you use to open the file?

pixey


CW is if your using cccam

I see in the other thread you say your using mgcamd try this in SOFTCAM NOT CW

but if it was working now is not you must have this ?


F 007B1FFF 00 11xxxxxxxxxxxxxx ; Service-123HD (10.0°E)
F 007B1FFF 01 11xxxxxxxxxxxxxx ; Service-123HD (10.0°E)

[dog-man]

DCC, ftp to dir that it is in. I think right click on it and select edit, then save.

Going from my failing memory.


dog-man

[simon 2003]

DCC browse to your softcam then paste it in

[pixey]

DCC. Sorry what is that?

pixey

[simon 2003]

dreambox control center for FTP works with enigma 2 recs like vu+

[pixey]

Oh okay, I use Vucc to FTP, same difference I suppose.
I will try and let you know.


pixey

[pixey]

I have edited and saved the softcam file but it is the same. I am not sure that I edited it correctly as there is so much in the softcam file.

When it worked for a while on Saturday, I didn't edit anything or update keys ( from what I remember) and it cleared.

Wouldn't the softcam.key have the keys for service-123HD in it now?

I have updated keys today but no good.

pixey

[mister-t]

The line with Service-123HD does not appear in my constant.cw file.

pixey

just copy and paste the lines in softcam file,my softcam file still says pltv but opens the new channel no problem
the notepad file i uploaded works fine

mister-t

[pixey]

Thanks. I will try that. I think I am now confusing myself :(

pixey

[sprouts]

Is this no longer supported by BISS