6 inch superjack actuator

[cosworth4x4]

have a 6 inch actuator im going to use.

question is the sticker on reverse it says to mount it with motor in the downwards position,instructions do not mention anything the cover has not been put on incorrect as it has only 3 fixing screws , there is also no drain holes in it so that does not help either.

so has the sticker been incorrectly fitted ?

[ABA]

what exactly dose it say is it fit motor down or fit this way up ? every actuator ive fitted have all been with motor facing upwards but never fitted one so small

[cosworth4x4]

yeah all the ones ive had in the past have been motor up , wording is fit this way up with a arrow and then the motor is at the bottom , ill upload a picture tomorrow.

[cosworth4x4]

photos.

[ABA]

carnt see them making them with the power cable going in on the top
and carnt be on upside down as with 3 screews cap will only fit one way
and carnt fine any info about a darl 36150 sorry m8
as said befor never fitted one with motor down theve all been motor up
but will keep looking though

[cosworth4x4]

the heavy duty ones do have cable in via the top .

[cosworth4x4]

im beginning to wonder if this is for indoor use on something other than a sat dish .

as no drain holes at the rear either.

[TK4|2|1]

Stick it motor up and drill a drain hole in the bottom.


Sent using sorcery and the magic interwebs

[cosworth4x4]

i think that is going to be my best option to be honest, as water is defiantly going to get in through the arm,and motor at the bottom its going to die pretty fast.

[ABA]

try smothering the case in sillicon thatle keep the water out