^^COMPASS^^
09-05-2013, 10:55 PM
Setup Guide for Spiderbox 6000HD
Patch Loading. Please note : Only use Spiderbox 6000HD Patches and Channel lists, all other model Spiderbox files are NOT compatible.
Download the latest Spiderbox HD6000 patch from the link below and copy it to a USB stick.
https://www.satpimps.co.uk/forumdisplay.php?579-Firmware
Place USB stick into Spiderbox and go to Menu / System Settings / Update & Backup / Image Upgrade, scroll down and select if in a folder, if not then side arrow to select the patch file from the right hand screen, press ok and wait for the file to load, Spiderbox will reboot when complete.
Connect Network cable between Router and Spiderbox.
To get extended Menu options goto Menu / Others and press 1111, this will give you 3 extra options at the bottom of the list.
Go to ‘Network’, scroll down to IKS and press register OK, will then show Connection Status as Connected and expiry date.
To go Wireless go to Menu / Multimedia / Network Settings right scroll to select Wireless, ok, enter your wireless Password then go to the floppy disc icon in the same text window to save.
Satellite Setup
Go to Menu / Sat Settings, scroll down the left hand list and click OK to select all the Sats you want to scan, this will give them a tick.
Right arrow across, scroll down to Motor, right arrow to select ‘Diseq/Usals’, OK, Scroll down to Mode, select Drive to Satellite, scroll down to Set Location, OK, Scroll down Set Long then Lat then save, scroll to Go ‘Save Data and run’ thats it.
( OR - change the mode to Go to Satellite (its just other name for USALS) , and then Set location ,
Menu->Satellite settings->Right box change motor from NONE toDiseqc1.2/USALS-> OK-> change the mode to `GO to Satellite` and take it from there (setting the location etc ) and saving )
Now to scan, Goto Menu / Automatic Sat Scan scroll down to ‘Scan select’ and change to ‘All Sat’, thats it, go get a coffee while it scans.
Or
You also have the option to load a pre-made channel list link below thanks to Jimmy
https://www.satpimps.co.uk/showthread.php?161755-Spiderbox-HD6000-Channel-list
Loading a new channel list {could be your channel list or one from *****}
Now place the USB stick back in the SpiderBox
Menu **** Accessory **** USB ****
Move the cursor down to the file that you want to download from the USB stick
Now follow the on screen instructions,
After you have updated your receiver it will reboot,
or
press menu-system setting-update&backup-ok-image upgrade
or
load the ssu channel list onto a USB stick and plug it to the USB port on the spider.
Then :Menu-><or> to System Settings->select Software update->OK->select the first option S/W Upgrade->On the next screen go down to highlight the ROOT and then right to the box on the right where you should see the list of files on the stick , select the ch list and press OK, confirm changes when asked
How to Backup lists and data, link below thanks to kempa82
https://www.satpimps.co.uk/showthread.php?161737-How-to-backup-lists-data&p=875392#post875392
I will update and add to the guide as necessary, this is just to get you started out of the box.
addendum, for software to apply correctly,factory reset before and after loading new software, be sure to save your channel data first,
reset code is 0000
EPG Timer for Recordings.
You will first need a suitable USB storage device plugged into the front USB port, I use and can recommend a 2.5 inch laptop drive 160gb or 250gb fitted into one of the small USB caddies, these are self powered from the Spiders USB port.
A very nice easy new feature that works well, Up to 8 timer recordings can be set via EPG selection, first go to Multimedia / Recorder Settings / One Button Recording / On (this is for the remote red button start). Then set yourself a suitable ‘Default Recording Period’ then exit the menu. Make sure your time is set correctly in the System Settings / Time Menu.
Select a channel that you want to record, press the EPG button, right arrow and down to select the program you wish to record, yellow button ‘Book’ scroll down to ‘Timer Mode’ and right arrow to ‘Recorder’, ok.
You can also set up a Timer recording manually in the System Setting / Adv Timer Menu.
---------------------------
ADDING C lines or N lines
Menu/Others/Network/Server Setup/OK/ Type to ON Right arrow to CCcam or Newcamd/Down arrow/ fill in necessary info
Thanks jb
You can add a total of eight C or N lines which can be entered via Remote control
the cccam is version 214 on spiderboxes, and no it cannot be changed
------------------------------------
adding C or N lines by USB method is here
https://www.satpimps.co.uk/showthread.php?164824-How-to-enter-C-N-lines-in-HD6000-by-usb
Patch Loading. Please note : Only use Spiderbox 6000HD Patches and Channel lists, all other model Spiderbox files are NOT compatible.
Download the latest Spiderbox HD6000 patch from the link below and copy it to a USB stick.
https://www.satpimps.co.uk/forumdisplay.php?579-Firmware
Place USB stick into Spiderbox and go to Menu / System Settings / Update & Backup / Image Upgrade, scroll down and select if in a folder, if not then side arrow to select the patch file from the right hand screen, press ok and wait for the file to load, Spiderbox will reboot when complete.
Connect Network cable between Router and Spiderbox.
To get extended Menu options goto Menu / Others and press 1111, this will give you 3 extra options at the bottom of the list.
Go to ‘Network’, scroll down to IKS and press register OK, will then show Connection Status as Connected and expiry date.
To go Wireless go to Menu / Multimedia / Network Settings right scroll to select Wireless, ok, enter your wireless Password then go to the floppy disc icon in the same text window to save.
Satellite Setup
Go to Menu / Sat Settings, scroll down the left hand list and click OK to select all the Sats you want to scan, this will give them a tick.
Right arrow across, scroll down to Motor, right arrow to select ‘Diseq/Usals’, OK, Scroll down to Mode, select Drive to Satellite, scroll down to Set Location, OK, Scroll down Set Long then Lat then save, scroll to Go ‘Save Data and run’ thats it.
( OR - change the mode to Go to Satellite (its just other name for USALS) , and then Set location ,
Menu->Satellite settings->Right box change motor from NONE toDiseqc1.2/USALS-> OK-> change the mode to `GO to Satellite` and take it from there (setting the location etc ) and saving )
Now to scan, Goto Menu / Automatic Sat Scan scroll down to ‘Scan select’ and change to ‘All Sat’, thats it, go get a coffee while it scans.
Or
You also have the option to load a pre-made channel list link below thanks to Jimmy
https://www.satpimps.co.uk/showthread.php?161755-Spiderbox-HD6000-Channel-list
Loading a new channel list {could be your channel list or one from *****}
Now place the USB stick back in the SpiderBox
Menu **** Accessory **** USB ****
Move the cursor down to the file that you want to download from the USB stick
Now follow the on screen instructions,
After you have updated your receiver it will reboot,
or
press menu-system setting-update&backup-ok-image upgrade
or
load the ssu channel list onto a USB stick and plug it to the USB port on the spider.
Then :Menu-><or> to System Settings->select Software update->OK->select the first option S/W Upgrade->On the next screen go down to highlight the ROOT and then right to the box on the right where you should see the list of files on the stick , select the ch list and press OK, confirm changes when asked
How to Backup lists and data, link below thanks to kempa82
https://www.satpimps.co.uk/showthread.php?161737-How-to-backup-lists-data&p=875392#post875392
I will update and add to the guide as necessary, this is just to get you started out of the box.
addendum, for software to apply correctly,factory reset before and after loading new software, be sure to save your channel data first,
reset code is 0000
EPG Timer for Recordings.
You will first need a suitable USB storage device plugged into the front USB port, I use and can recommend a 2.5 inch laptop drive 160gb or 250gb fitted into one of the small USB caddies, these are self powered from the Spiders USB port.
A very nice easy new feature that works well, Up to 8 timer recordings can be set via EPG selection, first go to Multimedia / Recorder Settings / One Button Recording / On (this is for the remote red button start). Then set yourself a suitable ‘Default Recording Period’ then exit the menu. Make sure your time is set correctly in the System Settings / Time Menu.
Select a channel that you want to record, press the EPG button, right arrow and down to select the program you wish to record, yellow button ‘Book’ scroll down to ‘Timer Mode’ and right arrow to ‘Recorder’, ok.
You can also set up a Timer recording manually in the System Setting / Adv Timer Menu.
---------------------------
ADDING C lines or N lines
Menu/Others/Network/Server Setup/OK/ Type to ON Right arrow to CCcam or Newcamd/Down arrow/ fill in necessary info
Thanks jb
You can add a total of eight C or N lines which can be entered via Remote control
the cccam is version 214 on spiderboxes, and no it cannot be changed
------------------------------------
adding C or N lines by USB method is here
https://www.satpimps.co.uk/showthread.php?164824-How-to-enter-C-N-lines-in-HD6000-by-usb