Cccam

[bluenose50]

here is my prob just bought 800se clone everything fine and installed Cccam shows as installed and running
copied cfg file to etc file shows lines added nothing clearing
Cccam info shows no cards no clients no servers nothing at all
rebooted box and router
any ideas guys
thanks in advance
latest TSimage installed Ccam version 2.3

[donki]

Which image are you using?
Did you install ccc@m from TSPANEL or from normal downloads?

If it was at least reading the cfg file then it should list the servers you are trying to connect to assuming you sealions are entered correctly. Their status would then be green if alive red if not.

To where did you upload the cfg file? It belongs in /etc and not in /var/keys as per the good old days.

If you downloaded via TSPANEL then you will need to go into TSPANEL to start it which may be why it only appears to be working.

Just some stuff to think about. :)

[valerica]

It could be a router port forwarding problem .

Cheers ,
Val .

[voyager1972]

maybe your line,s are not active??????
is your network setup correctly????? try addons server
router does not need portforwarding for an inbound connection from a server,,,,,only needs port forwardong if you are running a server and letting clients connect to you.
is there any # symbols at the start of your lines??? if so delete them..

start with your network setup,,,,process of elimination after that

[bluenose50]

thanks for the replies Iam using latest Tunisia sat image cccam installed via ts panel lines are definitely active
cfg file FTP to etc
no probs with network
this box is just replacing my eagle box which works great

[echelon]

make sure the lines follow the correct syntax for the linux boxes and not the ones used on the eagle box

[bluenose50]

the lines are correct I've also tried some test lines with no luck

[A]

uninstall this version of cccam and install another one. Its a cccam problem and that file you are using. I think its nothing to do with your sealions its the cccam version which is either corrupted or not working with the image you are using

[bluenose50]

ok I'll give that a go

[bluenose50]

removed the cam reinstalled still no luck
driving me mad now

[automan2]

I know this might seem silly but there should be no #at the beginning of your sealion I only no this after trying to cure sons cccam problem over the phone .
Have you also given file permissions 755.

[voyager1972]

try a differant image,,,,,
https://www.satpimps.co.uk/forumdisplay.php?633-DM800-SE-Images

[bluenose50]

thanks blackhole working a treat