Vu Duo Twin Tuner for Cable TV

[DaOne]

Hi guys sorry not been around for a while

Quick question

Can you use the Vuo Twin tuners For Cable TV and Satalite Dish TV at the same time ?

Or

Do you have to change the tuners

Thanks guys

[sparky208]

diden,t no this could be done. anyone no were to get a cable tuner from .... Add Cable Services to your Vu+Duo, Vu+Solo, DM800 or DM8000



Steps for configuring the device on a VU+Duo using VTI Image 2.4



From the plugin download menu choose "drivers" and select the Sundtek Driver to download.
Once downloaded switch off the Vu+Duo and plug the Sundtek Tuner into a rear usb port.
Switch on the Vu+Duo.
Press the Blue button and go to "VTI System Tools" and select "USB DVB-T/C/S2 Panel.
Select "DVB_C_Tuner_autostart.sh" and "DVB_C_Tuner_starten.sh".
Press Green for OK and reboot.
Select Menu/Information/About and make sure you can see the tuner. If not, repeat the autostart script and reboot.
Select Menu/Setup/Service Searching/Tuner Configuration and choose the Sundtek USB Tuner.
Make sure the tuner it is enabled and that the correct Region is selected.
Select Menu/Setup/Service Searching/Automatic Scan and choose the USB tuner and wait for terrestrial channels to appear.
If you are using Satellite Tuners as well go to Menu/Setup/System/Customize and change "Alternative services tuner priority" to be DVB-S/-C/-T.

The Sundtek guys offer excellent support and are constantly working on their products to be compatible with Enigma2 boxes.

[DaOne]

Thanks Sparky ,

Just wondering if you can use the latest image from VTI

Will do some research on this :thepimp:

[sparky208]

did you find out anything chum