can't get signal on 19 East

[jozeff]

hello everyone!
I am in the process of scanning channels on my TM 5402 M2 and cannot get any signal on Astra 19 East on this frequency 12.722H 22.000. Can anyone please check if it works. I am based in London, with 1 meter motorized dish (stab motor). I also noticed that fine tuning on TM 5402 M2 is not as fine as it is on old TM 1500. It is sort of quicker and misses the strongest signal easily and you have to move it back and forth many times before you get a the best signal strength. Or maybe it's just my set up? TM 502 does not agree with Stab motor?

[echelon]

nope, nothing on that transponder at all , seems to be dead

try 11836 H 27500 - DAS ERSTE

[2colby]

I don't have the 5402 but it is coming in on my Spiderbox Tp12722H/22000.3/4. DVSB-S2/8PSK. TV Vlanderveeren package, there is one fta info ch. that you can check it by.

[jozeff]

Thanks echelon! 12.722 H/22.000 is listed as Hustler and Private Spice on Flysat and Lyngsat. Strange there is no signal there

[Mickha]

There is a signal, on 12722 H 22000, and channels, but it is S2-8PSK 3/4, and the signal is reduced, compared to other channels.

[echelon]

unfortunately, you didnt give the full transponder details in post #1

now I know its S2-8PSK 3/4 its working

19.2°E Astra 1L 12721.75 H 119 Astra 1L DVB-S2 8PSK 22000 3/4 CANALDIGITAAL, 49.0 Mbps NID:53 TID:1119
HUSTLER/DORCEL

and

19.2°E Astra 1M 12324.00 V 96 Astra 1M DVB-S QPSK 27500 3/4 ASTRA 1, 38.0 Mbps NID:1 TID:1096
Private Spice From midnight CET

DETAILS FROM KING OF S*T

[jozeff]

Thank you guys! So what do I do to get it! Are there any specific settings in 5402 for it? I get no sgnal whatsoever

[echelon]

I would think you change the transponder details to S2-8PSK on 3/4 like I did, then scan

[jozeff]

Echelon , and where do I do that? Sorry for being illiterate)) I am new for this box

[echelon]

Echelon , and where do I do that? Sorry for being illiterate)) I am new for this box

so am I, seeing as I have never seen or owned one

surely its in the manual ? (RTFM)

[jozeff]

I don't see any options to select or change a type of transpoder in TM 5402 as opposed to my Azbox.But strange thing is TM 5402 gets a signal from other transpoders that are DVB-S2 8PSK . But that particular one it does not...

[jamsb]

Find channel editor NDF EDIT VERSION 1.69. install.

Load your or copy c/list to your pc and go to the sat,19 East ,then select /click channel you wish to edit .i.e. 12722 h

On r/hand side in pane click on Transmission drop down box appears select or click on DVB S2 8PSK

Then select FEC and select 3/4

Then click okay. then exit and save

Editor is here

https://www.satpimps.co.uk/showthread.php?163457-Ndf-editer-1-69&p=886232#post886232

[TheBadger]

Strange, mine gets it without any problems. Just can't de-crypt the channels.

[Mickha]

IS your receiver using the original firmware or a patch? It might help the original poster if he knew the best firmware, and easiest to use, to load on his receiver.

[jozeff]

Thank you Mickha! My receiver is TM 5402 HD M2 CI Super+, Software version 1.02, H/W version 1.00,
Is there any better version than this and where can I find it. Because my receiver doesn't pick up some S-2 8PSK channels from other satellites. I tried scanning both with and without a patch when it was fresh out of the box. To do it vis channel list download it a bit complicated for me at this early stage of my experience with the receiver. Anu suggestions welcome and thank you all for your help

[jozeff]

Sorted! Found a new -107 patch and bingo! Picked up the frequency straight away! Thank you all!

[TheBadger]

Glad you got it sorted. I originally scanned with the original firmware which came with the machine but now I'm using Phantompatch 1.05. What's the advantage of 1.07??