unimesh7Fowner
25-09-2013, 09:27 PM
For some reasons I am not getting any C band SNR system at all.
my set up is a duo2 with 3TB HDD and a WSI NS741U (two C and Ku separate output with no switching)on a 2.4 unimesh dish . Tuner A connected to Ku LNb o/p via V box iii to supply 36 volt to Ajak 36dc H H mount . Tuner B and D is not connected. Tuner C is connected to C band o/p . I have tried both BH205 and BH206 ( only yesterday).
It appears that BH206 vastly improved my Ku reception on tuner A but still 0 SNR on C band .I only getting 65 strength then jumps to 96 on certain parts of the arc but zero SNR all the time. so I requested a loan c/ku lnb from a well know satellite supplier from New Castle, so Dave ( the supplier's owner) sent me a older WSI dmx741u .
To my surprise the dmx model picked up more Ku band channels than the newer NS model
It may due to the internal Ku scalar rings on the DMX but is missing on the NS .
Futhermore the neutral metal rod on the dmx in the C band runs across the diameter ,where else on the NS its only run to the middle.
when I tried setting up the tuner I noticed that I could not find any c band transponder using BH205 or BH206. Furthermore satellite with c band only were not listed on the program. This only a small matter as I put them in manually.
Has a anybody has any idea why I have No c band using this set up.
Do I have download a different satellite list for the programming ?
what am I doing wrong ?or are both the c/Ku lnb by WSi is faulty? one is a NS741U and the other a dmx741u.
Shall I buy and try a DMS BSC621 C/Ku LNBF ?
Any ideas please why I am NOT getting C band signals . ( don't worry I have fitted the dielectric plates)
my set up is a duo2 with 3TB HDD and a WSI NS741U (two C and Ku separate output with no switching)on a 2.4 unimesh dish . Tuner A connected to Ku LNb o/p via V box iii to supply 36 volt to Ajak 36dc H H mount . Tuner B and D is not connected. Tuner C is connected to C band o/p . I have tried both BH205 and BH206 ( only yesterday).
It appears that BH206 vastly improved my Ku reception on tuner A but still 0 SNR on C band .I only getting 65 strength then jumps to 96 on certain parts of the arc but zero SNR all the time. so I requested a loan c/ku lnb from a well know satellite supplier from New Castle, so Dave ( the supplier's owner) sent me a older WSI dmx741u .
To my surprise the dmx model picked up more Ku band channels than the newer NS model
It may due to the internal Ku scalar rings on the DMX but is missing on the NS .
Futhermore the neutral metal rod on the dmx in the C band runs across the diameter ,where else on the NS its only run to the middle.
when I tried setting up the tuner I noticed that I could not find any c band transponder using BH205 or BH206. Furthermore satellite with c band only were not listed on the program. This only a small matter as I put them in manually.
Has a anybody has any idea why I have No c band using this set up.
Do I have download a different satellite list for the programming ?
what am I doing wrong ?or are both the c/Ku lnb by WSi is faulty? one is a NS741U and the other a dmx741u.
Shall I buy and try a DMS BSC621 C/Ku LNBF ?
Any ideas please why I am NOT getting C band signals . ( don't worry I have fitted the dielectric plates)