fixed dish settings

[den123]

what would the settings be for a fixed dish in the satellite settings

[^^COMPASS^^]

what would the settings be for a fixed dish in the satellite settings

The following applies for one fixed Dish

Menu>
Installation>
Satellite Settings>
Scroll to satellite>
Motor "NONE"

[Roadrunner]

If its only one Lnb that you have select none for diseqc if you have two or more lnb you can use diseqc1.0 on your box and select 1of4 2of4 etc (need to select correct port number for the lnbs on the switch ie lnb goes to port one of the diseqc switch then you select 1of4 on your box for the signal to pass through and so on. If you have more than 4 lnbs then you need a bigger switch and then you use diseqc1.1 and select 1of 16 etc.