Newcamd on SB 6000HD

[timbo]

Hi everyone,
Hope this is the right section.
Have just bought the Spiderbox 6000HD, I want to set it up with Newcamd. Is the procedure the same as my old 9000HD?
Many thanks,
Tim.

[jbvid]

Hi everyone,
Hope this is the right section.
Have just bought the Spiderbox 6000HD, I want to set it up with Newcamd. Is the procedure the same as my old 9000HD?
Many thanks,
Tim.
Hi
No, Adding C lines or N lines
Menu/Others/Network/Server Setup/OK/ Type to ON Right arrow to CCcam or Newcamd/Down arrow/ fill in necessary info
You can add a total of eight C or N lines which can be entered via Remote control.

Quite a lot of other differences too, need to patch before you will get the extended Menu, take a good read of the Sticky below
https://www.satpimps.co.uk/showthread.php?162474-Setup-Guide-for-Spiderbox-6000HD
jb

[timbo]

Thank you for your reply jbvid. Much appreciated.
Tim.

[timbo]

Hi can I use the Newcamd details from the 9000hd in the 6000HD?
Thanks,
Tim.

[jbvid]

yes, but don't use in both boxes or your supplier will cut you off

[timbo]

Do you meam I cant use IKS and Newcamd together like the 9000hd?
Tim.

[timbo]

Thanks manic, I wont do that. Have set the box up, thing is, eek, the line doesn't go in the same way as the 9000HD, and I cant find a thread with the info.
Tim.

[wolves]

@timbo.
Read post 2 again..;)

[blackdevil]

You can also add by usb stick

https://www.satpimps.co.uk/showthread.php?164824-How-to-enter-C-N-lines-in-HD6000-by-usb&p=894152#post894152

[timbo]

Thanks everyone for your help. I am really at sea with this one, I have patched it correctly, IKS is connected, scanned the satellites okay, but I'm blowed if I can put my Newcamd line in. In Network - server set up list, it looks the same as my 9000HD except under connect it says 00 C on the 9000 it says 1 C. Have tried writing the line onto a usb stick and it comes up as successful and reboots but still nothing, not sure what I should be writing on it though. I know its something I'm doing wrong, and I am nearly there. Getting grief off her indoors now because I have been 'hogging the telly' all weekend.
I don't want to keep pestering you guys, but can someone get me over the line?
Cheers,
Tim.

[timbo]

Thanks everyone, was all working, did a factory re-set and scan now it is glitching. I cant seem to put my Long, Lat in, and its showing 000.0 on both. I go to sat settings - Go to satellite - but when I try to scroll down to set location it just goes to - Go, bypassing the others, and wont go right to - set location. Bit frustrating, wish I hadn't done the reset now, but I read its best to do one before and after setting up.
Cheers,
Tim.

[timbo]

My mistake, don't scroll right scroll down to get - set location - Still wont let me put in my long details 0.097167 the decimal point is in the wrong place. Anyway the London option done the trick. Thank you everyone.
Tim.

[Anrakh]

There's no point in specifying your location down to what would be millimeters of accuracy. One place of decimals is usually more than sufficient.

[timbo]

When I tried to add my N details using a USB stick it didn't work. The previous Spider 9000HD formatted the stick to FAT32. I notice the 6000HD does not have this facility, do I still have to format the USB to use it in the 6000HD?
Cheers,
Tim.