Upgrading box

[fman]

Hi all, I'm considering buying a vu+ duo 2 as my tm6900 super doesn't work too well with a cccam cline, would this box be a good option for me?
Regards


Sent from my iPad using Tapatalk

[DCG]

yes the duo will work with cccam a your line

[cosworth4x4]

i will second that the duo 2 has to be the best box out there at the moment.

https://www.goldwafers.co.uk/Vu-Duo2-Full-HD-1080p-Twin-Linux-Receiver-2x-DVB-S2-Tuner-PVR-ready.html

[Stev0]

I live mine so fast. Restarts in seconds rather than the 3 mins my dm800 takes! Highly recommend one!

[fman]

Thanks for input guys, think I might get one:)


Sent from my iPad using Tapatalk

[fman]

Hi guys, I have got a duo2 and have everything running except my motorised setup, usals dosent seem to work, it cant find any satellites and the search functions are useless. I have a fixed dish for 28e so that is fine, but I would like to use the other tuner with my motorised dish. the dish hasn't moved, it was working fine with my other receiver this morning. Any ideas very welcome.
regards

[gbmitie]

did you read that nice guide???

https://www.satpimps.co.uk/showthread.php?162732-Dummies-guide-to-setting-up-Vu-Duo2

[fman]

Yes done all that, checked and double checked that I followed it to the letter:)


Sent from my iPhone using Tapatalk

[DCG]

how have you set it up

[fman]

I have basically followed the dummies guide, used the latest bh image, input long and lat, channel list etc. Used FileZilla and vucc.


Sent from my iPhone using Tapatalk

[DCG]

ok I don't have the duo

so 2 tuners

tunes a is set to ????????? fixed

tuner b to ???????????? moter

or vice verca

then wat was next step moter set to simple then dfom diseq to positioner

need more info plz

[fman]

Yes that's about right, tuner b fixed 28e, tuner a, simple, positioner, as per guide, inputlong and lat, goto 0, upload channel list.


Sent from my iPhone using Tapatalk

[DCG]

goto 0, upload channel list.

don't understand this bit

you can pm me your lat and long ill check for you

[fman]

This is from the dummies guide:

"Press Menu
Select Setup Press OK
Select service searching Press OK
Select Positioner Setup Press OK
Select goto 0 Press RED Button

Dish should now goto 1w.

3. Upload a Channel List"

I'll pm as requested.



Sent from my iPhone using Tapatalk

[DCG]

are you sure you input your lat and long correct if so it should be working

[fman]

Sent pm.


Sent from my iPhone using Tapatalk

[DCG]

have you tried the tuners the other way round

[fman]

I haven't, but I will. Regarding pm, motor is usals.


Sent from my iPhone using Tapatalk

[DCG]

ok thanks cant understand why its not working
all connections fine if so try the tuners the other way round and see if that helps
also don't install a channel list see if it works then by manual scan

[fman]

Tried the tuners the other way, motor drives to 28e with low signal and can't find 13e or 19e. Maybe I'll try a different Chanel list or scan tomorrow, thanks for all your help.


Sent from my iPhone using Tapatalk

[DCG]

use catseye channel list m8

and the other tuner is working ok ok fixed dish 28.2e if so you wont need that in the moter list

[fman]

Got this sorted, I sent the motor to zero position a few times and eventually it worked, I had already tried this last night to no avail, so don't really know what the problem was.
Thanks for your help all the same.

Regards


Sent from my iPhone using Tapatalk

[DCG]

glad its sorted now enjoy