PDA

View Full Version : bbc satback on Blade 7000s



dave1234
29-03-2014, 03:49 PM
Looking for help.. I am interested in getting BBC satback on Intelsat 907. I have patched my Blade 7000s and managed to enter a BISS key to successfully clear a Moroccan channel. (on Hotbird) So I guess that the patch works ok.

It seems that a new BISS key is available for BBC sat back with lots of sites now giving it out (changed 27/02/14) So the key is OK starts 13.

When I get the bbc satback signal at 907 INTELSAT signal its reasonably good 57% stable and in the green. I then tune and get the listing of the channels available. When I try to enter the BISS key it just says bad signal whereas when I entered the BISS key for the Moroccan channel it went from the scrambled message then cleared after the BISS key was entered.

Any ideas help appreciated

Thanks Dave

FBOY
29-03-2014, 10:21 PM
You cannot rely on the receiver tuning as the signal is non standard.
You have to enter the parameters manually.

See post 4 in this thread
https://www.satpimps.co.uk/showthread.php?164999-how-to-enter-biss-codes-for-27-5w

villamarre
10-08-2014, 01:09 PM
best advice would be to get a decoder that you know works with 27.5W as you may struggle using an unproven box icecrypt 3200ccihd are good if you can get hold of 1 or technomate 5402 work well

echelon
10-08-2014, 01:17 PM
the BLADE 7000S definitely works with these keys (as per the title of this thread)

but yes they will work on some other boxes like the TM5402 etc (and SOME icecrypts)

mdt
10-08-2014, 01:56 PM
BBC satback works in SD but theres no audio in HD using the BM7000 regards mdt

marki
29-08-2014, 05:51 PM
If you set the correct audio pid and to AC3 ,they do.

manic01
30-08-2014, 08:38 AM
That key is old.
New starts AD

marki
30-08-2014, 09:49 AM
61293

This channel list works for 27.5W on Blade 7000 or TM 5402.Not sure about other satellites though