ICECRYPT S1600CHD low/high Sym Rates

[DJSat79]

Playing around with my new S1600CHD. Very small unit and works off 12V.
OK on the low sym rates of 1600 K sym (Feeds on I-905), but cannot decode high rates of 44100 K sym on I-907.
Spec from Icecrypt website shows rates from 2000 to 45000 (QPSK)
Anyone had any experience with this - Any ideas for decoding the high sym rates?

[kiwitt]

when you load the freq. 11,495, you have to change the PID , from auto, to BB*C ......

[Sangh]

Sorry guy im pretty new with this box....

When i put in the Transponder of Intelsat 907 ( 27,5W )
11495 44100 QSPK 9/10 he doenst find any channels and on my other receiver i do find the channels...

What do i need to change to get the channel list?

Thanks Sangh

[DJSat79]

Thanks for that, obviously not a problem with the high symbol rate.
Tried the "B*C" PID entry, still no channels found. Tried using the manual PID entry using correct vid/audio pids, still no channels found.
I know I'm getting on in years, so maybe I'm missing something obvious. (Firmware = 1.6.10, signal & quality at 90%)
PS my smart TV (with sat input) will find the channels OK (no chance of BISS for it though)

[DJSat79]

Sorry guy im pretty new with this box....

When i put in the Transponder of Intelsat 907 ( 27,5W )
11495 44100 QSPK 9/10 he doenst find any channels and on my other receiver i do find the channels...

What do i need to change to get the channel list?

Thanks Sangh

Hi , I think I have sussed it myself -
Select satellite I-907 @ 27.5W and enter the parameters as before, with PID entry set to "B*C", scan is successful.
If you select any other satellite (I was on "Satellite 3"), no channels will be found!