Roadrunner
14-06-2014, 01:28 AM
Looks like my tab2 has packed up :(
In the last few days I have encountered intermittent freezing (touch screen was unresponsive) changing orientation seemed to have partly cure the problem: If it froze I would turn it by 90deg. and it would start to work again ( in portrait mode). The problems only started when I have downloaded the last official firmware for this tab (4.2.2 Jelly Bean). Thought that Factory reset might cure the problem so I did it. Now Im stuck on the first setup screen (the one where you choose your country) with the touch screen not responding to taps(only thing that does work is auto-rotation. Tried restarting but it takes me back to the same screen , but the touch screen doesn't work , I can get into fix modes on startup no problem but there are no backed up files to recover from (I DID BACk UP but there is nothing in there now) Cant connect with KIES as I am stuck with factory fresh system unable to set it up. Cant even use ODIN to force feed it a new ROM as the PC doesn't recognise the device (tried several PC's now to no avail, all have trouble recognising the tablet , even tho all the recent drivers are installed on them) Can the firmware be loaded by SD card somehow? looks like this may be my last option (if possible) or its going to the bin. has anyone here performed such an operation? If so how do I do it? I already have the stock rom downloaded to my pc waiting to be transferred to the tab, but since I can't perform the usual ODIN upgrade I was hoping someone here would know if the sd way is possible and if so, how? Thanks for any advice
Edit: Just ordered a new touch screen, will replace it as soon as it arrives, with a bit of luck it only broken screen and they are cheap enough to buy. I hope that when replaced it would allow me to complete the setup (if the screen was the problem, and since it was on its last legs it can be) Maybe it was just a coincidence that it finally packed up during the reset. In the meantime tho I would like to try to reload the firmware so am hoping for your replies to the original request :)
In the last few days I have encountered intermittent freezing (touch screen was unresponsive) changing orientation seemed to have partly cure the problem: If it froze I would turn it by 90deg. and it would start to work again ( in portrait mode). The problems only started when I have downloaded the last official firmware for this tab (4.2.2 Jelly Bean). Thought that Factory reset might cure the problem so I did it. Now Im stuck on the first setup screen (the one where you choose your country) with the touch screen not responding to taps(only thing that does work is auto-rotation. Tried restarting but it takes me back to the same screen , but the touch screen doesn't work , I can get into fix modes on startup no problem but there are no backed up files to recover from (I DID BACk UP but there is nothing in there now) Cant connect with KIES as I am stuck with factory fresh system unable to set it up. Cant even use ODIN to force feed it a new ROM as the PC doesn't recognise the device (tried several PC's now to no avail, all have trouble recognising the tablet , even tho all the recent drivers are installed on them) Can the firmware be loaded by SD card somehow? looks like this may be my last option (if possible) or its going to the bin. has anyone here performed such an operation? If so how do I do it? I already have the stock rom downloaded to my pc waiting to be transferred to the tab, but since I can't perform the usual ODIN upgrade I was hoping someone here would know if the sd way is possible and if so, how? Thanks for any advice
Edit: Just ordered a new touch screen, will replace it as soon as it arrives, with a bit of luck it only broken screen and they are cheap enough to buy. I hope that when replaced it would allow me to complete the setup (if the screen was the problem, and since it was on its last legs it can be) Maybe it was just a coincidence that it finally packed up during the reset. In the meantime tho I would like to try to reload the firmware so am hoping for your replies to the original request :)