steper moter no thanks

[ivan5678]

thanks in advance spider 6000 hd good box can some 1 help when I go from hot bird 2 30 west it takes an age moter stop start is there a fix or is it my end please help

[Mickha]

There was a problem, with the old spiderboxes, and some motors, that did this, when using USALS. I think it could be fixed by changing to Diseqc 1.2 and manually storing the satellites.

[ivan5678]

thanks 4 reply I am on diseqc 1.2 @the mo my moter is new technomate 2200 thanks again 4 reply

[jbvid]

thanks 4 reply I am on diseqc 1.2 @the mo my moter is new technomate 2200 thanks again 4 reply
Hi
Long dish movement from 13e to 30w and will take time but should be without stops if on Usals, try it.

Go to Menu / Sat Settings, scroll down the left hand list and click OK to select all the Sats you want to scan, this will give them a tick.
Right arrow across, scroll down to Motor, right arrow to select ‘Diseq/Usals’, OK, Scroll down to Mode, select Drive to Satellite, scroll down to Set Location, OK, Scroll down Enter your own Long / Lat then save, scroll to Go ‘Save Data and run’ thats it.

Now to scan, Goto Menu / Automatic Sat Scan scroll down to ‘Scan select’ and change to ‘All Sat’, thats it, go get a coffee while it scans.
jb

[blackdevil]

Maybe you need to reset your motor.
Check motor instructions how to do it.

[ivan5678]

sorry 4 delay at the mo I will live with the problem but will reset my moter at a l8r date keep the good work up thanks in advance