art2013
03-07-2014, 10:56 PM
Hi
Came across a page where it says you could use your pc for recording, been trying for a few days but no joy yet, here is the extract I found from an old site, has anyone had this working on an icecrypt s3500. ,thread was from here, just noticed.
All credit to jono.
hi there for those who have not figured it out the 1.07.89 firmware has added a backslash to the on screen keyboard and finished off the required changes to the software and we now can have remote network shares accessable from your decoder
ie:
create a network share on your computer and give it a name with less than 11 characters and without any spaces.
note the ip address of the server and type it into your decoder in the server box in the following format:
192.168.0.1/movies
ip.address.of.server/share.name
The above is what you would put if your share is called movies on your computer and your server (computer) is located at 192.168.0.1 for an example.
Click connect and the boxes will grey out and will show you the amount of free space etc on the server and other details.
If you then go to the play list and press the arrow button and select network and you can browse your computer or network attaches storage for files to/for play back/veiwing on your decoder.
You can even record or time shift to your network share if you change the settings in the record menu.
Came across a page where it says you could use your pc for recording, been trying for a few days but no joy yet, here is the extract I found from an old site, has anyone had this working on an icecrypt s3500. ,thread was from here, just noticed.
All credit to jono.
hi there for those who have not figured it out the 1.07.89 firmware has added a backslash to the on screen keyboard and finished off the required changes to the software and we now can have remote network shares accessable from your decoder
ie:
create a network share on your computer and give it a name with less than 11 characters and without any spaces.
note the ip address of the server and type it into your decoder in the server box in the following format:
192.168.0.1/movies
ip.address.of.server/share.name
The above is what you would put if your share is called movies on your computer and your server (computer) is located at 192.168.0.1 for an example.
Click connect and the boxes will grey out and will show you the amount of free space etc on the server and other details.
If you then go to the play list and press the arrow button and select network and you can browse your computer or network attaches storage for files to/for play back/veiwing on your decoder.
You can even record or time shift to your network share if you change the settings in the record menu.