No CA Error on dreambox 800 hd (original)

[ka004h9564]

Hi all,iv just got this problem (No CA Error on dreambox 800 hd (original)),used the patch and it says done,but if i turn it back off then on i get the same message,how do i reflash image on ??
many thanks
Ken..

[Barney]

Info from another sat board ..

1. connect via serial using NULL Modem cable and Ethernet to ROUTER and pc

2. load patched version of dreamup, select your com port and then click connect and power on dm800

3. when initialised it will display http serial mode on lcd and show dhcp ip once ip is displayed dreamup has served its purpose and now its in flashmode

4. log into webshell on pc using the 192.168.x.xxx address on LCD disply and flash as normal

[ka004h9564]

Thanks for the reply,tried the above got to part 3 then when i try to log in using webb browser it hangs and times out.
many thanks
Ken..
what is webshell

[saintomer1866]

dreambox 800 hd (original)
used the patch and it says done

think you need to explain just exactly what it is you've done as i NEVER patched my dm 800 hd (original) once
sounds like you've put a clone image on it ?

[ka004h9564]

I put a new image on this morning(dont know which one now but sure it was a blackhole image)then after it had flashed i got the message error no ca when it tried to boot
hope this helps
many thanks
Ken..
tried to repair boot loader.

[saintomer1866]

original blackhole for a original dm 800 is a very old image, why would you use that ?

[ka004h9564]

Reason,im an old stick lol,but just couldnt connect to my config files so had to reflash
many thanks
Ken..

[saintomer1866]

Can't be 100% sure but seems that you may have put whatever image on the wrong box