BBC biss decoding on 27.5w Intelsat

[Satcat]

I'm in UK so don't need them, but is it possible to get and clear these channels on VU+ solo 2 using vix image? and if so could someone explain how please?
I've been doing a lot of searching, but don't seem able to find an answer.
Thanks.

[Dark Cloud]

there are BISS keys that become public every so often.
A lot of ex pats need them to get their Eastenders/Corrie/Emmerdale fix.

[kota]

yes it is possible but it's not that easy. If you got the will and some patience you will get it sorted eventually.

Plenty of info here and it sure will work with Vix.

_http://openpli.org/forums/topic/26684-enigma2-and-bbcitv-at-275w-intelsat-a-big-challenge/

Good luck

[Satcat]

Thanks for the link kota. I've got the will and some patience, but unfortunately not the technical ability. I was hoping there was a just simple file available to ftp to box.

[Burnham]

There was a thread recently about BISS and compass posted a keys file in that thread.

If these are standard BISS channels it is not difficult to get BISS working with the correct key. The key goes in the constant.cw file and your config file tells cccam/oscam where the constant.cw file is located.

[kota]

I'm afraid it's not that easy. The keys are available and that's probably the easiest part.

The real problem is that the PMT is encrypted and so without a dedicated script (three to be exact) an edited lamedb file with the right pid's and oscam-ymod (in order to get sound on the HD channels) properly configured in your box you won't be able to clear them on any E2 box like the Vu+ you've got.

I know the thread I directed you to is quite extensive and somewhat confusing but if you try hard I'm sure you'll sort it out.

Cheers

[Burnham]

I only have a simple setup, no lamedb, no oscam-ymod (is that a file?) and no dedicated scripts.

So far I have no problems clearing the two ESPN channels on 15°w and Fox Sports on 9°e with just the keys in a constant.cw file.

Perhaps if you need to get every BISS channel out there you need a complicated setup, but so far I've kept it simple and it works for the three channels I have tested.

[Satcat]

@kota. Thanks for the link. There is a lot of info there to take in, but to summarise, am I correct in saying that what needs to be done is to ftp the three files to usr/bin, set to atributed 755, make sure I have uptodate keys in softcam file and run oscam_ymod? Or is there more to it than that?

[kota]

you will also need to edit your lamedb with the correct audio pids which are available on the thread too. Otherwise no AAC-HE sound on the HD channels and remember in order ftp the edited file to your box you will need to stop E2, send the file and restart E2 again. Telnet init4, ftp the file and finally telnet init3 or the changes wont take effect.

@burnham sure you could if the PMT wasn't encrypted on this transponder at 27.5W unlike the ones at 15W and 9E you mentioned. Please read again what I said.

[ozzsurf]

heres a lamedb already done
unzip it
use dreambox control centre

telnet init 4

now ftp the lamedb only to
/etc/enigma2
give it attributes 755

back to telnet

telnet init 3

also

To install dvbsnoop, telnet opkg update && opkg install dvbsnoop

[Satcat]

Thanks guys. I think I've got it now, except the "dvbsnoop" bit. Is there a file named dvbsnoop to ftp? or do I just telnet as above. Also I presume is ok to use VUCC for telnet.

[ozzsurf]

you might already have it
look in /usr/bin
if its not there
telnet the above command it will install it

VUCC is ok
any telnet or ftp is ok

[ozzsurf]

also ftp to/usr/bin
find the file
bbc_pmt_starter.sh
edit it with your password like below

then go to openwebif plugin on your box
enable http authentication yes and save





"bbc_pmt_v4.py -t long -d /dev/dvb/adapter0/demux0 -a root:password"

[Satcat]

Thanks ozzsurf. Done that, but not sure how to edit bbc file. Can you help please. My username in file zilla is root and the password is left blank.
#!/bin/sh

scriptName="bbc_pmt_v4.py -t short -d /dev/dvb/adapter0/demux3"
logName=/dev/null
#logName=/tmp/bbc_pmt.log

while [ 1 ]
do
echo "=== starting $scriptName" **** $logName
$scriptPath/$scriptName **** $logName 2>&1
echo "=== $scriptName exited..." **** $logName
done

[ozzsurf]

you have this at the moment


scriptName="bbc_pmt_v4.py -t short -d /dev/dvb/adapter0/demux3"

change it to this


scriptName="bbc_pmt_v4.py -t long -d /dev/dvb/adapter0/demux0 -a root:password"

long mode works on solo2
and you are adding
-a root:password to the end of the line

use your solo2 password

[Satcat]

OK. In front of scriptName there is "#!/bin/sh" do I leave that or delete it? and the password? I wasn't aware I had one for my solo2, where would I find that?
Thanks.

[ozzsurf]

bbc_pmt_starter.sh
should now look like this
with your solo2 password
in place of the words your-password

[Satcat]

Thanks again ozzsurf. All done, except password. How do I find what/where it is please?

[ozzsurf]

when you use VUCC
what do you put as a password

if you have not got one
use VUCC so that your logged into your box
then go to telnet
type passwd
enter a password twice

now your box is password protected

[Satcat]

Done every thing now including putting new keys in softcam file (I've only put bbc 1 in up to now) but still a black screen.
As well as putting bbc_pmt_starter, I've put in bbc_pmt_v4py and enigma2_pre_start.sh. Do these files need any editing at all? or any other ideas?
My head is starting to hurt.

[ozzsurf]

so you have oscam_ymod
set up and running
with oscam.keys

[Satcat]

Yes I put the new keys for bbc1 in softcam.key file.

F 10441FFF 00 20************FA ;BBC One England (27.5°W)
F 10441FFF 01 20************FA ;BBC One England (27.5°W)

Then stopped cccam and started oscam_ymod.

[ozzsurf]

rename softcam.key to
oscam.keys
put that with all the other oscam_ymod files
/etc/tuxbox/config/oscam_ymod

or where ever you put them

restart oscam_ymod

[Satcat]

There was already a file in etc/tuxbox/config called oscam.keys so I overwrote it. Still nothing. And, O dear, I'm now not opening other biss and Irdeto ochannels which I was....Panic.....

[ozzsurf]

have you set up oscam.confi
and oscam user

[Satcat]

Panic over, I've got my other biss channels opening again.

[Satcat]

have you set up oscam.confi
and oscam user

I presume so, I'm using oscam to open other biss channels. Unless there is something more to do........

[ozzsurf]

so run what you done and i see where we are at

[Satcat]

OK. I've ftp'd the two bbc and enigma file to usr/bin set to arbibute 755.
Then did as you said with the lamedb file.
Then installed dvbsnoop.
Then enabled http authentication yes and save.
Made a file called oscam.keys, put in bbc 1 keys and ftp to etc/tuxbox/config (it overwrote a file of that name which was already there)
Restarted oscam_ymod.

[ozzsurf]

and you have long mode in bbc_pmt_starter.sh ?

and you have set the correct solo2 password in bbc_pmt_starter.sh ?

if not on the pass
set enabled http authentication to no and save

and you have oscam.keys with other oscamymod files

you have dvbapi set up

oscam.conf

[dvbapi]
enabled = 1
boxtype = dreambox
user = userymod

oscam.user

[account]
user = userymod

you dont need anything in oscam.server

to clear 27 with emu and oscam.keys

[Satcat]

Yes, yes and yes. dvbapi is something I dont know about, can you explain please.

[ozzsurf]

put in

oscam.conf

[dvbapi]
enabled = 1
boxtype = dreambox
user = userymod


put in
oscam.user

[account]
user = userymod

make sure oscam.keys are in

restart oscam-ymod
it should work

openwebif plugin
open web interface enabled yes

[Satcat]

Thanks for your all your help ozzsurf, but still just a black screen. I'm sure I have done everything you have said, I must have missed something, but I dont know what.
Unless I haven't made my oscam.keys file properly.

[ozzsurf]

your using vix right
maybe change your image to openpli 4
:)

i have it working on openpli 4
for 6 or 7 months

also had it working on blackhole but no sound on hd channels with blackhole

iv not tried on vix maybe it dont work with that

[Satcat]

I dont realy want to change my image and Kota mentioned in post#3 that it was possible on VIX.

[ozzsurf]

i put vix on later and see if it works

[ozzsurf]

just put vix on
works ok
all sd ok
no sound on the hd channels

gonner take this off now and put openpli 4 back :)

[kota]

works fine with VIX as well as in all the other openPLI based images difference being how to setup oscam-ymod files on any given image. Definitely not with Black Hole ones as far as HD sound is concerned but on the SD channels even mgcamd will do.

[Satcat]

Am I right in putting "Oscam.Keys" in etc/tuxbox/config and overwriting the file that is already there, as once done there seem no way to edit that file.

[ozzsurf]

"Oscam.Keys" in etc/tuxbox/config yes
why cant you edit it ?

when you try out new files
rename the old ones .bak
like Oscam.Keys.bak that way you dont overwrite and can go back

the hd channels on vix no sound
blackhole the same

openpli perfect

you must of fooked up somewhere
cuz i had it working on vix in 10 mins

[Satcat]

Sorry for delay it coming back, my broadband went down after my last post and has just come up again.
I have had to reflash my box after it decided not to work. All ok now. Just checking that I have all the file in place and will come back.

[Satcat]

I now get this message on screen.

Service invalid! (Timeout reading PMT)

Does that help pinpoint where I have fooked up.

[ozzsurf]

i just replicated the error you have
Service invalid! (Timeout reading PMT)
by going in to the lamedb file and editing bbc news out


ftp the lamedb file over again
to
/etc/enigma2

and reboot

[Satcat]

Thanks for not giving up on me ozzsurf. Iv'e just had a look in lamedb file, it's like a mine field in there. How on earth do I identify the correct channel?

In fact I don't see any 27.5W channels in there at all.

[nml]

@satcat , what ozzsurf said was to resend the lamedb file over to the box remembering to stop and restart enigma then reboot, it looks like you have a corrupted file.

When I first did this ozzsurf helped me a lot and if you follow his instructions eventually it will work.

Good luck,

nml.

[kota]

@satcat ever heard of teamviewer ?? PM me if interested ...

[ozzsurf]

you need to start again
you have a symlink (shortcut)
for oscam.keys going to /usr/keys/softcam.keys
thats no good

you need oscam.keys in /etc/tuxbox/config
with the rest of the oscam files

edit

see dec 2014 tutorial here

https://www.satpimps.co.uk/showthread.php?169911-27-5-west-guide

[pacha man]

Hi

Thank's all guys here , i succesed to run it on my Vu+ Solo , It is working very fine .

but i have only one problem , is HD channels without sound , there is any one here can help me about it ?

thank's so much .

[nml]

What image are you using?



Hi

Thank's all guys here , i succesed to run it on my Vu+ Solo , It is working very fine .

but i have only one problem , is HD channels without sound , there is any one here can help me about it ?

thank's so much .

[pacha man]

I'm using Black Hole .

[nml]

There is your problem, HD sound does not work on Blackole images, you need to install Openpli4 and all will be well.

[Satcat]

There is your problem, HD sound does not work on Blackole images, you need to install Openpli4 and all will be well.

Or openvix.

[robbie74]

Does anyone know if this will work with a icecrypt 3700 ( the box is the same as a amiko alien 2 ) ?

Thanks

[antrabe]

Could be that works with vu duo2 last black hole and cccam i need a easy guide because i read all post and i dont understand how got it works

[antrabe]

Any idea?

[antrabe]

All Is ok but less the audio on hd channels anyone has working audio on hd?

[ozzsurf]

All Is ok but less the audio on hd channels anyone has working audio on hd?

your using blackhole yes ?
HD sound does not work on Blackole images
read posts 48 to 51 above

[antrabe]

Yes it seems the only images patched are openpli and vti tomorrow i Will test on openpli

[nml]

It has been reported on other forums that ch 5 hd is now on 27.5 West not had a chance to test yet but will test on Friday. Could be be usefull info for some.

[Barney]

YES CHANNEL 5 UK HD is now active and working on 27.5W
works just fine on my TM5402 M3 HD :)

[holmroad]

YES CHANNEL 5 UK HD is now active and working on 27.5W
works just fine on my TM5402 M3 HD :)

Yes, same here Barney, but suppose not all boxes have same methods of setting up for this?

[Satcat]

Just got it up and running on solo2.:woohoo-022:

[nml]

Yes I can confirm that it working fine both Oscam and Oscam ymod on Openpli 4 on Solo 2 and Zero.

[viaccess2]

hi there
my lamedb shows :
4540:0cfdace7:1000:0001:25:0
Channel 5 HD
p:BBC,f:40
did edit oscam key file no luck

[nml]

The lamedb entry is wrong try this.

4540:0cfdace7:1000:0001:25:0
Channel 5 HD
p:BBC,c:001901,c:031901,c:050001, c:121902,C:2600,f:4



hi there
my lamedb shows :
4540:0cfdace7:1000:0001:25:0
Channel 5 HD
p:BBC,f:40
did edit oscam key file no luck

[viaccess2]

Thanks for Quick Reply got video working but audio is not working Audio Pid is missing ? 65655

[nml]

This is working for me on both Oscam and Oscam ymod on Openpli 4 on Solo 2 and Zero.

What image are you using?

[viaccess2]

black hole 3.0.2 F rest is working BBC HD Channel 4 HD ITV HD audio all working perfectly

[viaccess2]

oh yeah its working Thanks A Lot just was a miner mistake copy paste well Thank you very Much 65656

[lacierva]

bbc 4 hd has now appeared on 27w would anyone happen to have the lamedb entry, and entry of the softcam without the sensitive bit ?

[kota]

not yet broadcasting

[felix dias]

With the Dream500HD (with the image dreamelite) on sat. 27.5w,I see channels from the bbc,except the channels three and four .

Someone could explain to me ?

Thank you very much.

[Satcat]

BBC four HD is working now.

[Satcat]

BBC four HD has now gone. It must just have been there for the olympics.

[lacierva]

oh bolloxxxxx it will be soreley missed by me anyways

[dagram]

Hello everyone !

first of all sorry for my english

ii have few question
is this image blackhole 3.0.2 on vu solo 2 did i have sound on HD channels

could someone help me install this package !

i scan satellite ,edit lamedb

install dvpsnoop change attributes for 755

copy script 3 bbc_pmt_v6,bbc_pmt_starter, enigma 2_pre_starter change attributes for 755

i shoud instal some oscam I do not know which one
and what now please help

best regards

[nml]

It's in the 27.5 West guide in this section post 2. Oscam ymod be sure to put the configs in.

Here. https://www.satpimps.co.uk/showthread.php?169911-27-5-west-guide&p=922493&viewfull=1#post922493

[dave1234]

Hi All thanks for all your help. But no channel 5 and more 4. I do understand that the lamedb file needs editing but I notice that these entries are missing in the oscam.dvbapi file what would I need to add here ? Any help much appreciated. PS does run on open atv 6.3 and oscam emu 11517 Zgemma H2S. Thanks in advance for any ideas !!

[Satcat]

oscam.dvbapi
A: ::4540:1901 2600:000000:1FFF # Channel 5 HD
A: ::4FC0:1D4D 2600:000000:1FFF # More4+1

[statequieta]

Hello there.

I'm going to install a new dish pointing to Intelsat so I can get the BBC channels and I have just bought a Vu+uno 4k SE.

What image do you recommend me to work with BISS encrypt so I can open them?
Is this guide at the beginning of the thread still working?

Thanks!

[felix dias]

Try :

-use a recent image for your box
-scan satellite 27.5W
-intala oscam or ncan cams and softamKey (current)