twin tuner configuration help

[starfox]

ive installed a twin lnb to use the benefits of the Vu solo 2's twin tuner, but its not that straight forward setting it up i have a diseqc motor connected to tuner A, using this setup in config (simple...positioner.....001.31*. ..west....053.6** north....) the second lnb i set to a few configs but was unable to record while watching another channel only on FTA channels im really confused is there any guides or tutorials or any one could help me out.

[bellejt]

if you are on rotor you can only record from the same satelite.For coded channels you also need a cam installed.

[Burnham]

What image are you using.

If it's the latest ViX image there is a CCam fault, only the latest cccam 2.3.0 version works for two channel viewing and recording.

[starfox]

im using black hole 2.1.1 Ive installed the cccam 2.3.0 but it looks like black hole isn't compatible i think, has no encrypted channels are coming through

[Dark Cloud]

I have same set up as you working 100%.
I use usals for motor tuner A, and Tuner B set to second cable of motorised Tuner A.
cccam 2.3.0.is fine on Solo2.

[starfox]

thanks for all your replies, all working after a few hours, the main problem was the cccam it has to be 2.3.0 version , and i changed image to latest vix build