View Full Version : Help please
Sparky147
16-10-2014, 06:57 AM
Hi guys me again really need help completely lost at the moment i have a techomate 5402 m3 it's had a fractory reset done on it I have found the channel list and phantom patch and down loaded them could someone please tell me when I load them onto my box I can't find the patch so I can't find the hidden menu to use clines or anything any help would really be grateful thanks
Did you follow all of the instructions in the following, it appears that the receiver should be Factory Reset Twice:
1) Back up current Channel List to USB - also make a note of current satellite/stb settings, e.g. latitude/longtitude, USALS(or Diseq), etc etc
2) Factory Reset
3) Load patch
4) Factory Reset
5) Power box off/on at back with power toggle switch
6) Reload Channel List from 1) above
7) Suggest load latest TM Softcam (unless already loaded on previously whilst on old patch)
8) Check all settings are back to 1) above
9) Off you go!
Sparky147
16-10-2014, 06:00 PM
Ok thanks will try that
holmroad
16-10-2014, 11:53 PM
Its very similar to this thread you could have looked up regarding the M2, only difference is the patch number for your M3, which I also have and find to be an excellent stb!
So see this thread:-
https://www.satpimps.co.uk/showthread.php?168682-tm5402-hd-m2
TonyO
17-10-2014, 12:09 AM
Great response to someone in trouble, excellent.
Not everyone has the patience to help.
JAYMAD1981
23-01-2015, 02:31 PM
hi can you help me or point me in the right direction first time doing all this i have technomate 5402 m3 what is the best way doing all this many thanks
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.