loss of many channels on 19 deg

[JOE.MADDISON]

anyone having problems with decoding channels on 19 deg astra with spider 6000, my spider9000 with iks clears many channels that 6000 is not clearing.

[TonyO]

which ones are you having trouble with ?

[JOE.MADDISON]

12402 eurosport,tf1,guli,w9 and many other tx,2 recrs fed from8 output lnb and both showing approx same sig strenth etc.

[Aldo]

12402 eurosport,tf1,guli,w9 and many other tx,2 recrs fed from8 output lnb and both showing approx same sig strenth etc.

Eurosport HD & TF1 HD and W9 HD are on 12207 V 29700 with a Spiderbox 6000. I did not see Guli.

[TonyO]

I just checked 12207v with my spiderbox and nearly all that transponder clears ok, try deleting it and reloading, make sure you have decent signal level as well.

Sometimes lnbs don't voltage switch too well when they get older.

[JOE.MADDISON]

have tested today and compared. reset/rescanned 6000 and 9000 on 13 both. channels decoded about same,19 ..e spider 9000 many .6000 very few,also tested on diff outputs of lnb.no improvement,sig strengths about same..dif cables also.cmaster 1.2 dish,vbox controlled from spider 9000.

[jbvid]

@ JOE
Are you going over the max channels allowed of (6000) on the the 6000HD?
Why not try loading in the current Compas pre-made 6000hd channel list?
jb

[JOE.MADDISON]

only loaded channels on 13 and 19 for comparison so no ware near limits very strange key 00000000 runs out mid dec 14,is the server for 6000 reducing my channels,used a protek on same lnb/cables on 19 and it "works" fine

[jbvid]

only loaded channels on 13 and 19 for comparison so no ware near limits very strange key 00000000 runs out mid dec 14,is the server for 6000 reducing my channels,used a protek on same lnb/cables on 19 and it "works" fine
Hi
Yes but did you delete all the original channels from the 6000hd prior to the new scan?
In my position I would load in a current pre-made channel list which will have all the current working channels and current working frequencies in it.
jb

[JOE.MADDISON]

factory reset

[JOE.MADDISON]

jbvid.....took your advise...reset box ....used compass channel list...and works that way fine.....thanks....bit lost why normal scanning in of channels only allowed a handful to work.....thanks jb and thanks compass.