Vu+ solo2 tuning problem

[splc]

Hello all,
Mu Vu+ solo2 has a tuning problem which i couldnt get sorted out. Receiver boot up normaly, i can access menu and all items. but i cant tune any channels now. when i go to sat finder no any requancy can be locked where my other receiver can. Other than this i cant find any other problem. I checked my power supply, LNB voltage and all. They seems normal. Vu+ is installed with Blackhole 2.0.9. Somebody help me. Thanks.

[chippy]

have you installed a channel list? if not install one and see if you can then view any channels.

[Mickha]

Have you first setup the Tuner?
Go into the menu, Setup, System Searching, Tuner Configuration, and set your tuner/tuners as required.
Do you have a fixed dish system, or motorized?

[splc]

Thanks both of you. I have a movable dish. it is run on separately. From Blackhole feed plugings i downloaded satellite XML file for 38E to 132E and save to receiver. Tuner configurations are OK. But Satloder plunging earlier let me download satellite .xml with Lyngsat. but latly it only showed me One satellite. So i used Satbeams. And also loaded satellite xml from Satellite xml creator and ftp to receiver. Is it due to Image? My solo2 is clone. What i should do more?
Last dicribe method work for me earlier with satellite.xml downloaded from Lyngsat. Why now i cant download from same? Should i flash different image and see?
Thanks.

[cannydo]

I had a clone as well at one time spic I would suggest a reflash but which box do you have?? If it's a cloud I can direct you to the correct image through the PM system on here.

[tr8.]

again a clone and issues.
You may find the tuner is faulty. storms have been known to damage them.
Have you gone to a sat and done a blind scan. That will tell you.
I only use my own sat list.


be very careful what image you load, most if not all the new one will kill your box.

[splc]

Thanks cannydo for trying to help. My box is Vu+ solo2 . Yes pm me.

[splc]

In My blackhole vertion i do not have blindscan. It is Blackhole 2.0.9. The vendor said not to upgrade above that. I am searching for nother safe image in vix ot vti for test.Thanks

[cannydo]

Hi spic
I have PMed you and how do you know this box is a clone doe's it say Vu+ on the box??

[splc]

Yes Vu+ solo2 on box and VFD display. This is not Cloud i box. Definitely a clone.I read your message.