lnb input and tuner settings

[wilfreado]

I've got a single cable running from my motorized dish in lnb1 input and tunerA on usals and tuner B equal to tunerA.
Moving between sats dont seem right.
whats the optimum for my set up here?
Thanks.
wilfreado

[Dark Cloud]

are you sure you have got your location exactly correct in usals, via googly earth or similar ?.

[Mickha]

What exactly doesn't seem right, when the dish is moving?
Do you mean it's not hitting the satellites correctly, or something else?
Are you certain your dish is tracking the arc correctly?
Have you entered the correct latitude, and longitude, remembering negative longitude readings = West. positive = East?
Try a site like dishpointer.com, to verify your correct latitude and longitude.
Can you please post more details, regarding your problem.

[wilfreado]

the long and lat settings are all good.
The issue is when moving off 28 deg and back again the screen stays black as if no signal. got to be something trival i recon.
Just need to confirm my lnb input and tuner settings are correct before I start fiddling in ernest.

[cosworth4x4]

try disabling tuner b see if problem still there.

[wilfreado]

Cheers cosworth. You pointed me in the right direction there. Ive set tunerB to loopthrough to tunerA and it seems to have sorted it.
Thanks guys,

[Mickha]

Which image do you have loaded?
You should get a display up, showing the signal quality readings, what do they show, after moving your dish?
Is this on a FTA channel, or encrypted channel?