Idman Azerbaycan

[pixey]

Does anyone know if it is possible to clear Idman Azerbaycan - Eutelsat 7°E- 11492 V 30000 -CW (DigiTurk keys) with a VU+ Uno and if so, how?

Thanks

pixey

[gibson]

I would also be very interested in a solution to opening this. I have a strong signal in my area, Hertfordshire, but unable to clear this channel with my VU+ Solo 2 with BH loaded.

Best wishes from,

Gibson.

[digicon]

Any Linux Enigma2 receiver can open this package with Softcam keys look at using either Oscam_y_mod or Oscam_Emu in conjunction with a softcam key file

[pixey]

Gibson, have you had any luck with this yet?

pixey

[gibson]

Hi pixey, yes it opens as digicon states using Oscam-y-mod on my Vu+ Solo 2 with Blackhole image. I wonder if this Oscam version opens any other satellite channels other than 7* East. Over to you digicon please.

Best wishes from,

Gibson.

[Mickha]

Might still be a couple on 39E.
You should find a list, of available channels, in the keys section.
Was going to test the channel, on 7E, but it seems to be opening FTA, at the moment, as I haven't loaded Oscam, or any keys.

[digicon]

It opens all the available or should i say whats left of the Softcam channels including any BISS encrypted and the Soft NDS channels on 4.8° east.

I only use Oscam_Emu on my receivers now i dont bother with Cccam and Mgcamd anymore as Oscam will do Emu and 'Line' duty all in one

[pixey]

Hi pixey, yes it opens as digicon states using Oscam-y-mod on my Vu+ Solo 2 with Blackhole image. I wonder if this Oscam version opens any other satellite channels other than 7* East. Over to you digicon please.

Best wishes from,

Gibson.

That's great Gibson. Would you please point me in the right direction for the oscam that will work on my Uno and also a basic tutorial if you don't mind. I have been googling but there is so much information I am confusing myself.
I am in Enfield so not far from you.

Thanks again

pixey

[pixey]

I have found Oscam_ymod_V18T51_TNTSAT-SD-HD in TSPanel under addons.
Is this the correct version for me and will it upset my mgcamd settings?

pixey

[gibson]

Hi pixey just picked you reply up. I have Oscam-ymod 18-56 loaded on my setup. I shouldn't think it would interfere with your Mgcamd settings as it's a completely different beast, but best let others on this forum agree just in case.
I think I downloaded this version from Lin*xSupportAdd which shows many BH compatible cams and other goodies. If this pointer isn't within the rules please amend and accept my apologies.

Best wishes from,

Gibson.

[pixey]

Thanks Gubson. I downloaded the version I mentioned above and I can switch between it an the mgcamd without any interference between the two, but for example, if I am on nova sport, clearing with mgcamd, and I switch to oscam-ymod, the current version from tspanel, the picture freezes and I know it should clear Bulsat. I dont know where the Oscan config file is located so don't really know where to start.

pixey

[Mickha]

I think the Oscam files are located in Var, Tuxbox, Config.

[pixey]

Thanks Mickha, I will have a look when I get in from work.

pixey

[pixey]

I don't have a Tuxbox folder off the Var folder, I don't seem to have one at all!

pixey62857


Yes I do, its under /etc/tuxbox/config

This is my oscam.cfg file:

# oscam.conf generated automatically by Streamboard OSCAM ymodv18-t49 build #0
# Read more: http://streamboard.gmc.to/oscam/browser/trunk/Distribution/doc/txt/oscam.conf.txt

[global]
logfile = /dev/tty
disablelog = 1
nice = -10
maxlogsize = 0


[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = local
pmt_mode = 0
request_mode = 0

[webif]
httpport = 8888
httprefresh = 15
httpallowed = 127.0.0.1,192.168.1.*-192.168.1.255,192.168.0.1-192.168.*.255
httphideidleclients = 0
httpreadonly = 0
httpsavefullcfg = 0

[pixey]

Hi again.

I have found this file, enigma2-plugin-cams-oscam-9859_emu-black_hole_mips32el.ipk but when I try to manually install it, I get this error and it won't install.

62911

Does anyone know what the problem is?
My box is a VU+ Uno running the latest Black Pole image (OE 1.6)

Thanks

pixey

[Mickha]

I can't find that file, in the VU+ Emu section, there are a few other Oscam files, you can try, although they are listed for Black Hole, I haven't tried Black Pole, although I have seen it mentioned, on another forum:
https://www.satpimps.co.uk/showthread.php?161009-Vu-Plus-community-BH-oe2-emus-(2013)-(2014)
https://www.satpimps.co.uk/forumdisplay.php?515-Emus

[pixey]

Thanks Mickha. I am trying to use that version of oscam because Gibson has it working on his setup. I have a feeling that the file I have found might be for OE 2.0 and that would be why it is not installing. I can't find a different version of oscam-9859_emu that is definitely for OE 1.6.

I have installed this version enigma2-plugin-cams-oscam-v9687_bh_all.ipk but it is not clearing anything with the softcam.key in /usr/keys/


pixey

[Mickha]

I discovered that my provider added Idman Azerbaycan on CCcam, which explains why it was opening, I have now tried it, using an old Oscam, and the latest dreambox Keys, posted by powercisco, and I haven't managed to get it to open.
It looks like it might take some time, to configure Oscam, which at the moment I don't have.

[pixey]

Mickha, thanks anyway for trying to help I will continue trying different things

pixey

[Mickha]

There are a few helpful files, in the Emulator setion:
https://www.satpimps.co.uk/forumdisplay.php?533-OScam

[digicon]

I discovered that my provider added Idman Azerbaycan on CCcam, which explains why it was opening, I have now tried it, using an old Oscam, and the latest dreambox Keys, posted by powercisco, and I haven't managed to get it to open.
It looks like it might take some time, to configure Oscam, which at the moment I don't have.


The ones posted by Powercisco are just directly taken from SU Forum without any editing, don't expect these to work straight out of the folder they need editing to remove keys on satellites which are impossible to receiver here and also possible conflicting keys from another provider.

I wish i could say you just drop the file in and it works but that would be too easy.