i cant get my dish to move to the uk satelite

[paulupton123]

im not sure wat ive done wrong or how do i correct it ??
up until today if i wanted to change sat i pressed the sat button chose a satelite and it moved /changed to the sat i wanted ,,eg fro astra 1N ,,28 east (eng uk) to hotbird 13

but now today it wont change to the uk sat 1N
it moves from astra 1H 19 east to hotbird and to intelsat etc etc but NOT uk sat 28 east

i have tried turning the spiderbox 6000hd box off and on several times without success

i have also tried a stb reboot several times without success

any suggestions would be great ,thanks

[Mickha]

Astra 1N is at 19.2E, Astra 2E, 2F and 2G are located at 28.2E.
usually you can just select a channel, on the satellite, like BBC 1, and it should move to that satellite, unless you've set software limits, or you haven't got it set up correctly.

[paulupton123]

Astra 1N is at 19.2E, Astra 2E, 2F and 2G are located at 28.2E.
usually you can just select a channel, on the satellite, like BBC 1, and it should move to that satellite, unless you've set software limits, or you haven't got it set up correctly.

well it has been working fine up until today
my mate is coming round at one o clock ish
i will show him wat u put and see if it helps

all i can say is that wen i moved sat in past it was fine its just today it moves to all the sats except the uk satelite and sometimes wen it moves to the other sats it sometimes doesnt ,,so it is obviously playing up ,temperamental is the word or intermitent
if you have any other advice i can pass on to him when i see him at 1pm i would be grateful

[Mickha]

Are you using USALS, or Diseqc 1.2?
With USALS you enter your Latitude, anbd Longitude, and the receiver works out your location then moves the dish accordingly, with Diseqc 1.2 you have to move the dish, using your receiver, then store each satellite.
Has anything changed?
Have you loaded a different channel list, or updated your receiver, or patch?
Check the Spiderbox 6000 sticky threads, and tutorials:
https://www.satpimps.co.uk/forumdisplay.php?726-Spiderbox-6000-HD

[paulupton123]

Are you using USALS, or Diseqc 1.2?
With USALS you enter your Latitude, anbd Longitude, and the receiver works out your location then moves the dish accordingly, with Diseqc 1.2 you have to move the dish, using your receiver, then store each satellite.
Has anything changed?
Have you loaded a different channel list, or updated your receiver, or patch?
Check the Spiderbox 6000 sticky threads, and tutorials:
https://www.satpimps.co.uk/forumdisplay.php?726-Spiderbox-6000-HD

cheers mikha
i havent changed anything ,well i dont think i have
my mate will be here at 1pm and i told him wat i tried to do
he will help me word it correctly so i can put the correct comment up here
we may need your help but im pretty sure he will work out wat ive done
i will show him your comments
i think he set up the satelites individualy eg one at a time if that helps your question

[paulupton123]

ALL SORTED
my mate has come round and sorted the problem
thnx to you mikkha for your advice thou
the problem was something much different apparantly id moved the setttings for 28 east not sure how id managed that but i did