Problems loading a SpiderBox HD6000 channel list

[Kev_B]

Hi,

I have downloaded the Spiderbox 6000 Channel editor 2.1.1 from the forum to create a custom channel list for italian channels on Hotbird 13E.

When I try to upload the ssu file into the receiver I get an update fail message. Looking in the channel editor log file I see the following errors during save

10/9/2015 2:41:07 PM File Save Saving SSU File.
10/9/2015 2:41:07 PM File Save Byte Check. OK
10/9/2015 2:41:07 PM File Save Byte Check. OK
10/9/2015 2:41:07 PM File Save Byte Check. FAILED 37492
10/9/2015 2:41:07 PM File Save Byte Check. FAILED 37972
10/9/2015 2:41:07 PM File Save Saving SSU File Failed. Index was outside the bounds of the array.

My receiver is a Spiderbox HD6000 H/W version 01.00 S/W version 01.17 Date Jul 24 2014.

Any ideas what I may be doing wrong ?

Regards

Kev_B

[echelon]

maybe you have too many transponders or too many channels in the list ?

make sure there are less than 6000 in total

maybe try the latest 2015 patch for the older boxes , april 2015 ?

[travill]

Yes a updated should sort it out

[EXTRAFACTO]

yes your box needs patching...you will find the correct patch in spider box section...follow instructions in there
reboot box inbetween loading etc...
then go system settings...system info...and if done correctly should read as follows
model=6000hd
hw version=01.00
sw=01.20
date=apr 1 2015
after doing this...if you have same problem...check like echelon says...6000 channels max