Re Phantom Patch 139P

[holmroad]

See powercisco kindly posted the latest Phantom Patch rendition number 139P for the TM5402HD M3 etc a few days ago.
Has anyone else actually tried this patch - and if so, how do you find it performing?
I personally have had to revert to patch 138P dated 15/9, as many channels were freezing up on 139P and other 'benefits' were in fact not as good on 139P as they are on 138P?;)

[dragonm]

See powercisco kindly posted the latest Phantom Patch rendition number 139P for the TM5402HD M3 etc a few days ago.
Has anyone else actually tried this patch - and if so, how do you find it performing?
I personally have had to revert to patch 138P dated 15/9, as many channels were freezing up on 139P and other 'benefits' were in fact not as good on 139P as they are on 138P?;)

Thanks for the info, I have a TM54O2HD lined up 45 east to 45 west. I am trying to learn what I can do with it and your post helps.
dragonm

[dave1234]

Thanks for the info, I have a TM54O2HD lined up 45 east to 45 west. I am trying to learn what I can do with it and your post helps.
dragonm
Don't know about IPTV but Discovery channels on 4.8 E work ok. Can't get AFN to work however.

Otherwise box works o.k

[holmroad]

A F N working fine on 9E for me, must be something wrong at your end dave - which patch are you on - and which box mate?
IPTV working ok in the main, but remember much of it only lasts a short while!

[dave1234]

Hi Holmroad yes Technomate 5402 139 patch M3 but on 9E one AFN channel cleared but audio only I did double check everything ??
Grateful for any ideas

[holmroad]

Hi dave, well assuming you loaded on patch 139P via the 'accepted' TM method, i.e.:-

1) Back up Channel List to USB memory stick
2) Factory Reset from Main Menu
3) Load patch via USB memory stick(138P for me - but 139P latest)
4) Factory Reset
5) Power off M3 at rear toggle power on/off switch for up to 60 secs
6) Load on backed up Channel List from 1) above
Off you go!

NB: do NOT load latest TM Softcam or all PowerVu keys will be lost!

(Maybe this is what you've already done dave, in which case suggest you reload patch as above mate!)

[dave1234]

O.K.Holmroad thanks for all the detail I will try again

[dave1234]

Hi Holmroad still no luck but I managed to screw up my channel lists. Have retuned manually but still cant get Film 4 + 1 to work on Intelsat 907 (I live in spain) I get scrambled channel! . Also I was wondering if I could pick your brain on recording on TM 5402 M3 I have had freezing problems before but invested in a fast usb3 data stick.(the box gives it 10 out of 10 for speed) Sometimes it works fine other times it freezes and causes the box to crash so you can only turn off and on again. Any help gratefully received

[holmroad]

Assume you first formatted USB stick to fat32 mate? As for Film 4 + 1 on 27.5W I haven't got that opening either, don't believe anyone else has mate? Only Film 4+ opens for me.

[dragonm]

Thank you for the info guys, useful to save hours messing about. :)
dragonm

[dave1234]

Thanks for that. Film4 +1 does show up on a feed search as channel 29 still have no idea about the usb stick recording failing however

[holmroad]

Thanks for that. Film4 +1 does show up on a feed search as channel 29 still have no idea about the usb stick recording failing however

Yes dave, it DOES show up, but to my knowledge cannot be cleared?

[dave1234]

It does clear as well !

[holmroad]

It does clear as well !

Please explain 'how' you do it dave, as I can only open Film 4+ and NOT Film 4 + 1 mate!
(4 + 1 scans in, but not yet heard from anyone how to actually open it, e.g. audio pids, vid pids etc!)