PowerVu Compatible Receivers

[dOOds]

Please post here if you know of a receiver that "Definitely" works with PowerVu or if you yourself have got it working with your receiver..

I'll go ahead and start with the receivers i know or have tested...Please bear in mind just because a certain receiver will work it does not mean the performance will be spot on....As Echelon has said many times for best performance you need a vu solo2 or vu duo2 type of box to be flawless...

So far...

Vu+ solo2 with openpli - Tested and working by me..4 west only at the moment..something to do with des or something,other sats will show oscam clearing but you will have black screen..

I believe DM800HD & DM800SE both work also..>Dreambox works all them sats without stream relay

I know of some more and i will post shortly..please post your results..

many Thanks guys & Gals

[CokeAddict]

Vu+ Solo
Vu+ Duo
Vu+ Uno
Vu+ Ultimo
Vu+ Solo2
Vu+ SoloSE
Vu+ SoloSE v2
Vu+ Duo2
Vu+ Solo 4K

[dOOds]

Amiko Alien2 Triple (Spark - sh4) - reported working


Working too at DB500HD(org) today Openpli4-fresh instaled(no outher emus), same cfgs.
1W working perfect, AFN 9e - sd working well, hdsports- some breaks


Work fine on dm8000, thanks!


E! HD 9.0E works here with Xtrend ET10000

[dOOds]

I use the cloud iBox II work

Clarke Tech 4100


I use Xtrend ET 6000


yes openATV5.1 and GigaBlueQuad+ open
PowerVu channels


Dr.HD D15 ---- s/w D15_141p

Astra 4A / SES-5 @ 4.8° East
12149 H DVB-S/MPEG-2 27500 3/4 ----all channels

Eutelsat 9A @ 9° East
11766 V DVB-S/MPEG-2 27500 3/4----------------------- AFN Guide
12092 H DVB-S2/8PSK MPEG-2/MPEG-4 27500 3/4--- E! Europe HD

Intelsat 10-02 - Thor 5/6 @ 1° West
12380 V DVB-S/MPEG-2 28000 5/6 ----------Universal Channel Czechia

Telstar 12 @ 15° West
11611 H DVB-S2/8PSK 4055 3/4----------- Fight Network HD

SES-4 @ 22° West
11563 H DVB-S/MPEG-2 6111 3/4------------ CNN Newsource Europe

[Barney]

Technomate TM5402 M1,M2,M3 HD
WORKS For All with Latest Patch from Last year .

TBS Q-BOX 5922 SE HD Tested with [ DVB Dream & VPLUG ] 100% Working Fine
TBS Q-BOX 5980 HD Tested with [ DVB Dream & VPLUG ] 100% Working Fine

[echelon]

tested on VU DUO 1 running openBH in the flash and OpenMultiboot running on rear usb stick using ext4 format

OpenPLI4 jan 2016 installed in openmultiboot

oscam installed from the openpli server

copied over OSCam r11209 bin file provided by doodz into var/bin and chmod 755
(I renamed the old one by adding OLD to its name)

obtained the latest INFORMED files and ftp the SoftCam.Key file to the oscam config folder

in openPLI4 the path is

/etc/tuxbox/config/oscam/

other images will differ from that patch, as can the bin files like in openvix

I sorted out the config files too whilst in there

installed catseye motorised list using dreamset with e2 v4 http reload set

logged into the webif using the box ip address and port number

then went into the oscam config - stream relay and changed it to mode 0 (disabled)

also had to follow this info for section 2 as well

https://www.satpimps.co.uk/showthread.php?173308-PowerVU-without-Stream-Relay-With-Oscam-Emu

so 2 changes made in the patched oscam webif

then tested channels on 4w and the oscam webif showed EMU (emulator) in use , meaning its using the patched oscam with the SoftCam.Key file and those amended oscam settings

edit

also works with openvix hades v 018 too

also works with BH215 too

[holmroad]

Phantom allegedly (by himself!) currently working on an AU patch for P/Vu channels on TM5402HD M3 etc.

[satneo]

hey there anybody knows if it works on amiko 8150 hd..I have powervu section to place keys there

[dave1234]

Hi all I have been trying to get powervu working on my ZgemmaH2S. (oscam emu 11391 ) I seem to have gone round in circles with no luck 4.8e and AFN 9e. However BISS works and Arena Sport on 39e (Tandberg) . Strangely Agencia EFE 30w (powervu) does open (shows a test card). I can't understand, surely powervu will either work or it wont work? Thanks in advance for any ideas

[dog-man]

Works fine on VU Ultimo 4K with OpenPLi 6 without streaming if you use new drivers.

Until recently it only worked with streaming on this box.

[dave1234]

OK thanks for that

[Nikkas]

Works fine on VU Ultimo 4K with OpenPLi 6 without streaming if you use new drivers.

Until recently it only worked with streaming on this box.

Can also vouch for the DUO2 now working without streaming as well.

[paulus]

Also fine on Vu+ Solo2. However, I believe you also need oscam.emu 11392.

[CokeAddict]

Vu+ Solo
Vu+ Duo
Vu+ Uno
Vu+ Ultimo
Vu+ Solo2
Vu+ SoloSE
Vu+ SoloSE v2
Vu+ Duo2
Vu+ Solo 4K

Also working fine with:

Vu+ Uno4K
Vu+ Ultimo4K

And i'm sure it will also work fine with the upcoming Vu+ Uno4KSE and Vu+ Zero4K

Stream relay is not needed on any Vu+ boxes now, except for the Gen1 Solo, Duo, Uno and Ultimo

[scrambled]

Works on Hi tec box 9000. Turn off EMU emm (set it to disable). This stop the keys for being overwritten with keys that don't work. SIS on 4.8 East works well. Also had 9 East working but have trees in the way so can not test (AFN).

Got a DVB sky USB on my core i5 PC with DVB Dream. Using PowerVU emu 2.3 and soft Cam also works with SIS on 4.8 East.

Hope this helps

[dog-man]

Works on Hi tec box 9000. Turn off EMU emm (set it to disable). This stop the keys for being overwritten with keys that don't work. SIS on 4.8 East works well. Also had 9 East working but have trees in the way so can not test (AFN).

Got a DVB sky USB on my core i5 PC with DVB Dream. Using PowerVU emu 2.3 and soft Cam also works with SIS on 4.8 East.

Hope this helps

2.3??????

It is now up to 2.8.

[scrambled]

Yes. 2.3 still works for me. So if it isn't broke don't fix it. 2.8 any better. I have problems with trees in the summer, so a upgrade to powervu emu has not happened for a while. Any benefit from upgrading and can you attach the latest version of powervu emu. Glad to see if work well for you dog-man. Thanks for the update.

[dog-man]

Apparently, OpenPLi refuse to use the new drivers that allow powervu without streaming because they come from a third party and in their words, can not be trusted.

If you use OpenPLi then you need to obtain and install the drivers yourself.