Icecrypt STC3250 Combo patched firmware V1.6.70 - channel lists

[jallen01]

As a newbie to the forum, I can't PM ColdAsIce to ask him, but could anyone tell me (roughly!) what sat channel lists are included with this patched update, as the official Icecrypt only seems to have lists for 28E & 27W?

Thanks in advance.

John

[Ross_37]

I don't have this box but what channels are you looking for
It looks similar to the 1600 can you not go to installation,satellite installation and select the satellite you are looking for

[jallen01]

I don't have this box but what channels are you looking for
It looks similar to the 1600 can you not go to installation,satellite installation and select the satellite you are looking for

Thanks

Yes, I can do that and I can scan all the transponders on a particular bird, but I was kinda hoping that it might be possible to download files with pre-configured channel lists that could be loaded into the Rx - rather like the one that is available for the UK & Eire on 28E (and which I have loaded), but which has nothing on any of the other birds.

I am particularly interested in the channels on 19E at the moment because I am realigning a Diseqc-switched multi-LNB fixed-dish system with the centre LNB for that bird on the line of the boom - and I would have liked to download and install the relevant channel for 19E before I take the Rx outside so as to make it easier to check that I have aimed the dish at the right bird to start with, and to fine tune the aiming of that central LNB. (my Satlink Ws-6906 is OK in principle, but clunky in practice for doing that sort of thing ).

As it is now, I can't do that unless/until I can find a .abs file with the channel list for that bird included - any suggestions where I might find that?
(e.g. a German Icecrypt site where it can be found?)
PS: Only looking for the main FTA channels - nothing "sneaky"!

The other alternative would be to manually load some of the channel info from Lyngsat lists into the Rx - but that sounds very "pre-historic" in today's state of technology situation!

[Ross_37]

Jallen01
I guess you need someone who has the box to give you a backup copy to use. I see the latest version is 1.6.80

Not sure for your box but on the 1600 when l ftp for updates there are some other version listed with different channels lists.
other thoughts load the origional 1.6.70 unpatched onto the box from Icecrypt or the latest 1.6.80 and see if they have 19.2 included and then update the patched software only not that channel

[jallen01]

Jallen01
I guess you need someone who has the box to give you a backup copy to use. I see the latest version is 1.6.80

Not sure for your box but on the 1600 when l ftp for updates there are some other version listed with different channels lists.
other thoughts load the origional 1.6.70 unpatched onto the box from Icecrypt or the latest 1.6.80 and see if they have 19.2 included and then update the patched software only not that channel
Thanks and I have already tried both of those approaches, and the best I got was, IIRC, with 1.6.70 where I got a 28E channel list (1.6.80 had no lists at all).

I have however managed to make a little more progress with the help of William-1's strongest transponder list - so now I have those identified, and entered where necessary, for the main birds from about 9E to 28E, which will do for a start for the fixed multi-feed dish. Therefore I should be able to pick those to check and fine-tune the dish/LNB settings when I get to that stage (other problems have intervened, so it will be a day or two before I get around to that).