HiTech Box 9000 Channel Manager problem

[jeetley2]

Hi
In the Channel management after selecting the current Satellite for shifting channels from one position to another position causing disarray in the channel numbers. For example when I select channels 23,24,25 to move to position 90 they are scattered elsewhere miles away from selected position 90. Even if I select one channel to move to a single selected position it still doesn't move to that particular position and move away from the required position. Can't understand what's going on. Could anybody please shed some light on this problem. I am sure I am not doing anything wrong as I used quite a few satellite boxes before in my life. This is a next generation Box. Could be glitch somewhere, don't know. Regards

[jbvid]

Hi
Select the channel you want to move, this will give it a tick, move back up one to the ticked channel and press Text, then use the number keys on the remote to select the position you want to move the ticked channel to, save changes (Works for me)
ie My test was to move a wanted channel from 3467 in the list to number 1 in the list which must be 0001 (to 4 digits)
jb

[jeetley2]

Hi Jbvid
Thanks for the reply. Doing it exactly the same way still behaving unusually. May be I have to reload the patch and do the factory reset again. I let you know the results. Regards

[jbvid]

Hi
When in the Channels Manager the default is 'All Satellites' press the Sat button on the remote and select the Satellite you wish to edit, time consuming but in time I would expect to see a stand alone editor released as with the earlier STB's
jb

[jeetley2]

Hi Jbvid
Thanks for your help. I have reloaded the patch and after a 'factory reset' and reload of Ch.list it corrected the fault. Don't know what was it. As you suggested stand alone editor could be better and faster. Cheers

Jtl...