PDA

View Full Version : Hi blackdevil, are we going to hava any channel list 📃



Tano
07-02-2016, 06:02 PM
Hi blackdevil is any chance to have channel list.for hitech

Aldo
07-02-2016, 06:53 PM
Hi blackdevil is any chance to have channel list.for hitech

Eventually blackdevil or someone else may upload a channel list, but in the mean time you will have to create your own.

xanadu
07-02-2016, 07:27 PM
Does anyone have a link to a list of what MSCAMD is supposed to open, as nothing much opens at all as far as I can tell from 42E to 30W ?

It's coming up red now so I guess it's down at the moment??

satwyn
07-02-2016, 07:35 PM
nothing new there then i don't bother with mscan anymore a waste of time off most of the time

xanadu
07-02-2016, 07:36 PM
MSCAMD code must have got corrupted as I entered it again and it's now green, but am still not sure what it's supposed to open.

Receiver also crashed and deleted a lot of my channels. Nearly all my channels have got deleted so not impressed so far.

I have been used to Protek boxes, so new to this system.

echelon
07-02-2016, 07:43 PM
Does anyone have a link to a list of what MSCAMD is supposed to open, as nothing much opens at all as far as I can tell from 42E to 30W ?

It's coming up red now so I guess it's down at the moment??

we dont allow any lists of IKS or MSCAM channels that open on pimps, havent done for a few years since the "gift" list for the spiderbox 9900/9000/7000

if anyone did post a list it would be removed due to the forum rules, same as if anyone posted any server lists

if channel lists for this HITECH box were to be posted, they are not a problem, same as the spiderbox lists and catseye channel lists are also allowed on here

xanadu
07-02-2016, 07:47 PM
Thanks echelon.

I think I may have hit the maximum number of channels and might be the reason the box crashed and wiped everything.

I will keep an eye on the total number of channels after I have scanned them all back in.

echelon
07-02-2016, 07:49 PM
people have that same problem with the spiderbox , I believe 8000 channels is the limit for a HITECH box , including radio channels as well as tv channels

the spiderbox 6000 only allows 6000 channels so its especially difficult with that particular box to stay under the limit

the old spiderbox 9000/7000/9900 were 10k worth of channels as a maximum

so it varies from box to box

JOE.MADDISON
07-02-2016, 08:49 PM
hitech box 4000 tv +4000 radio channels

blackdevil
07-02-2016, 08:57 PM
Online Upgrade :
Upgrade and backup - HTTP Upgrade - red button (Default server) - green button (Download & Upgrade) (code is 1111)

Latest sw is 2.1.13

Mscamd service works almost perfect in Hitech.

Be carefull with previous sw, as when you save your channel list, reader edit infos saved in file (like Mscamd code,lines etc.). So it is for private use only and not for sharing.
It is fixed in latest sw

Channels maximum number is 8000, tv or radio or both.

satwyn
07-02-2016, 09:03 PM
mscam is not almost perfect on the sbox 6000hd should work just as well on both receivers

blackdevil
07-02-2016, 09:06 PM
mscam is not almost perfect on the sbox 6000hd should work just as well on both receivers

You are in a wrong thread.This thread is for different box and about channel list.
Open your own thread, be as specific as you can so we can advice you.

dOOds
07-02-2016, 10:14 PM
Gift nice,ya...But FFS everyone do some reading and get a good linux box....Spoon feeding seems the name of the game these days...Im sure however this is a great box and also available from our sponsors..Buy with confidence..

xanadu
07-02-2016, 11:34 PM
Im sure however this is a great box and also available from our sponsors..Buy with confidence..

You should get one. :)

Dave5118
12-02-2016, 05:31 PM
Online Upgrade :
Upgrade and backup - HTTP Upgrade - red button (Default server) - green button (Download & Upgrade) (code is 1111)

Latest sw is 2.1.13

Mscamd service works almost perfect in Hitech.

Be carefull with previous sw, as when you save your channel list, reader edit infos saved in file (like Mscamd code,lines etc.). So it is for private use only and not for sharing.
It is fixed in latest sw


That doesn't work for me, the server field is blank. I upgraded using the latest file posted on the 22/02/16, that version is 2.2.10

Edit: Working with the latest software now :)