BISS in OSCAM possible?

[3tv]

I used Gbox for biss on my dreambox which worked perfectly but as it looks like im stuck with oscam on the solo 4k is there anyway to get biss decoding working with it. searching seams to always end up needing to use oscam ymod.

[Burnham]

Standard OScam will do BISS on the old VU boxes - Duo2, Duo, Uno etc.

But I can't advise if the same goes for the solo 4k

[mrdude]

It's built with the same source code on both types of processors - so oscam works the exact same on both box types. So arm (solo 4k) is the same as the mips (other vu boxes) version - only the way it was compiled is different.

[CokeAddict]

Yes Biss works in oscam on Solo4k (and all mips boxes too).

[ian]

And dont forget Oscam is perfectly capable of connecting to Gbox shares too.

Ian.

[3tv]

created a constant.cw file with the following line:

2600:000000:2013:0316:1FFF::AA xx xx xx xx xx xx DD AA xx xx xx xx xx xx DD #fox_sports_Europe



added to oscam.server -

[reader]
label = constant.cw
protocol = constcw
device = /etc/tuxbox/config/constant.cw
caid = 2600
group = 1


in the oscam live log I get this:

vbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum amount of possible filters is 32 (oscam limit is 32)
2016/03/06 14:21:59 138FC11B c (dvbapi) Demuxer 0 ecmpid 0 CAID: 0664 ECM_PID: 1DB9 PROVID: 000000
2016/03/06 14:21:59 138FC11B c (dvbapi) Demuxer 0 stream Videostream (MPEG-2)(type: 02 pid: 0999 length: 0)
2016/03/06 14:21:59 138FC11B c (dvbapi) Demuxer 0 stream Audiostream (MPEG-2)(type: 04 pid: 0d8a length: 0)
2016/03/06 14:21:59 138FC11B c (dvbapi) Demuxer 0 found 1 ECMpids and 2 STREAMpids in caPMT
2016/03/06 14:21:59 138FC11B c (dvbapi) Demuxer 0 serving srvid 2013 (Fox Sports Europe) on adapter 0000 camask 0001 index 0000 pmtpid 0316
2016/03/06 14:21:59 138FC11B c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2016/03/06 14:21:59 138FC11B c (dvbapi) Demuxer 0 stream Videostream (MPEG-2)(type: 02 pid: 0999 length: 3)
2016/03/06 14:21:59 138FC11B c (dvbapi) Demuxer 0 stream Audiostream (MPEG-2)(type: 04 pid: 0d8a length: 9)
2016/03/06 14:21:59 138FC11B c (dvbapi) Demuxer 0 found 1 ECMpids and 2 STREAMpids in PMT
2016/03/06 14:21:59 138FC11B c (dvbapi) Demuxer 0 serving srvid 2013 (Fox Sports Europe) on adapter 0000 camask 0001 index 0000 pmtpid 0316
2016/03/06 14:22:03 138FC11B c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2016/03/06 14:23:17 138FC11B c (-) -- Skipped 14 duplicated log lines --
2016/03/06 14:24:17 138FC11B c (-) -- Skipped 12 duplicated log lines --



what am I missing?

[Burnham]

Try a different channel to test if it is a keys problem. The MUTV channel on 10°e has been working on the same keys for a least over a year, so should not be hard to find.

The fisrt past for MUTV is 2600:000000:0001:03e9:1FFF::20 ...........

The only other thing I can see is that you don't need caid = 2600 in the reader - but I can't see it would stop it working.

Last, the obvious, check your constant.cw file is in the referenced directory and restart OScam (sorry these are obvious - but said it anyway)

Last thought, with OSCam I have found it helps going through each file using the webif - change something in the file, then use the SAVE command.

[007.4]

@3TV
Are you tuning the Fox Sport channel on 13°E or 7°E? Only the one on 7°E is in BISS. The one on 13°E is encrypted in irdeto, which looks like the case in your log.

Also for 7°E check you have the correct SID and PMT in your key entry.

[3tv]

@3TV
Are you tuning the Fox Sport channel on 13°E or 7°E? Only the one on 7°E is in BISS. The one on 13°E is encrypted in irdeto, which looks like the case in your log.

Also for 7°E check you have the correct SID and PMT in your key entry.

yeah 7e sid 2013 pmt 0316

added nascar to the constant.cw and that's clearing.

I stopped using constant.cw via cccam years ago due to the duplicate sids failing, as well as some feeds refusing to open even with correct keys. Gbox 80x never failed though.
If anyone can open fox sports on 7e via oscam id love to know how.

[007.4]

Then why is your log showing "CAID: 0664" ? I cannot check ATM but if you are certain you are on 7°E then perhaps they have stopped using BISS and are now only using irdeto? According to Lyngsat the SID for the BISS channel should be 0001.

My entry in const.cw file - not recently tested.

#7° EAST
2600:000000:0001:0801:1FFF::AA xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx DD ;Fox Sport Europe(7.0E)

[3tv]

Then why is your log showing "CAID: 0664" ? I cannot check ATM but if you are certain you are on 7°E then perhaps they have stopped using BISS and are now only using irdeto? According to Lyngsat the SID for the BISS channel should be 0001.

My entry in const.cw file - not recently tested.

#7° EAST
2600:000000:0001:0801:1FFF::AA xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx DD ;Fox Sport Europe(7.0E)

****, ive tuned into 10803 which is irdeto2 instead of 12556

yehaaa :) both nascar and fox sports using sid 0001 but no issues :)

[Architect]

been following the thread for a couple of days with interest

i have setup oscam and the reader correctly but was wondering if anyone has an up to date constant.cw file they would feel happy to share ?

i am running r11160 (not the emu, doscam, ymod version) just the standard version

i would be very happy if someone can share, thank you

[digicon]

been following the thread for a couple of days with interest

i have setup oscam and the reader correctly but was wondering if anyone has an up to date constant.cw file they would feel happy to share ?

i am running r11160 (not the emu, doscam, ymod version) just the standard version

i would be very happy if someone can share, thank you

Have a Look Here: https://www.satpimps.co.uk/showthread.php?151428-DreamBox-Keys-By-Informed%AE&p=946935&viewfull=1#post946935

[Architect]

@digicon thank you

i did download that one, but am unsure which of the options within the rar to use

http://s7.postimg.org/hz9v6ofgr/key.png

the only one marked oscam has ymod in brackets, is this one ok to use then ?

in that folder i see 2 files oscam.keys and oscam.constant.cw

do i place them both in var/tuxbox/config ?? or do they need re naming ?

[Burnham]

Just use the constant.cw file from the download reference in the post above.

Then you have to follow all the steps mentioned in 3tv's posts - it's all in there.

[Satcat]

I just use BISS keys with oscam ymod to open that channel on solo2.

[3tv]

damn 2 feeds using sid 0001 and pmt 0800 conflicting in constant.cw :(