no line help please if you can

[den123]

i have used SoftCam Concierge Tool to transfer cline over but cant see it in the usr keys also not working any help please

[kegnkiwi]

Den,

What image are you using? You could do with using oscamtoccam convertor as is is really easy to use. Then dependent on what image you are using oscam.server files will either be in usr/keys for openatv or var/tuxbox/config. If you are using open then it maybe you need to send the basic config over to the box first. I will see if I can dig them out.

[kegnkiwi]

Here are the basic configs to send over to your box if you do not have them.

[den123]

thank mate iam useing openatv

[den123]

thank mate iam useing openatv what do i do with the file you have sent mate

[den123]

was working ok this morning

[den123]

my oscam server files are in usr/keys with ccam

[kegnkiwi]

Ok so if you have already had it working can you go into oscam.config and see what webif port number your using it will be something :8888 then just like cccam you can put your box's ip into your computers browser and then add :8888 example 192.168.0.1:8888 this will then let you see if oscam is working and if you have access to any cards.

[kegnkiwi]

if you can get into your webif it should look something like the picture below but it should show you how many cards you have access to.

[den123]

Thanks mate in there says line cccam off. How do I set this up please

[kegnkiwi]

Have you by any chance today been trying to download anything to do with oscam, if you have downloaded something by mistake it could have written over your oscam.server file and therefore knocked out your connection. In the webif see the tab that says files click it and then click on oscam.server and see if your converted cccam to oscam file is still in there. If it is restart the cam and see if you connection appears.

[den123]

all done mate thanks