PDA

View Full Version : Latest Hitech HB9000 patch



jeetley2
08-03-2017, 04:32 PM
There is new mscamd patch by HTTP upgrade today

jeetley2
23-03-2017, 06:49 AM
Hi New mscamd patch 22-3-2017 by HTTP arrived.

tinto de verano
23-03-2017, 08:56 PM
Just in case, be aware that 2.2.12 requires you to enter your mscamd code again.

Thanks.

tinto de verano

Locoman
24-03-2017, 08:08 AM
Where do I put the Mscamb code, as in the previous software it in the Conditional Access its not there.

jbvid
24-03-2017, 09:16 AM
Where do I put the Mscamb code, as in the previous software it in the Conditional Access its not there.
Hi
Use the Setup guide.
https://www.satpimps.co.uk/showthread.php?173514-Setup-Guide-for-the-HitechBox-HB9000
jb

dogrose07
24-03-2017, 11:04 AM
Thanks for info,I have tried a number times to Load the Mscamd code and ping test comes back bad,gone back to patch 2.2.08 no problem with Mscamd.
Regards

donegalman
24-03-2017, 12:29 PM
best pach so far, very stable,well done to blckdevil and his team.

etlevi
24-03-2017, 07:21 PM
Hi there! I check for my new pach but I can't see it. I checked in HTTP but no luck. Can anybody help because I don't know what is going on?
Thanks.

Locoman
24-03-2017, 08:08 PM
No ITV bonus

glenby
24-03-2017, 08:17 PM
Same for me Locoman.Tried reloading 3 times still the same.

Edit. Finally came back on.Possibly the list was being updated at the time.

xanadu
26-03-2017, 08:36 AM
Thanks for info,I have tried a number times to Load the Mscamd code and ping test comes back bad,gone back to patch 2.2.08 no problem with Mscamd.
Regards

Same for me. This patch does not work as all the MSCAMD settings in READER-1 are corrupted.

Does anyone have a copy of the MSCAMD settings?

jbvid
26-03-2017, 09:26 AM
@xanadu
Hi
The patch works fine, if you have corruption, http load the patch again. Read the setup guide part about entering Mscam, print it out and read it again. You need to enter your own personal 10 Digit number that you received when you first brought your HD9000.
jb

xanadu
26-03-2017, 10:10 AM
Did a factory reset and hard reset restore from USB, still the same.
All the MSCAMD settings are zero's. Before the upgrade the MSCAMD settings were random numbers and letters. Entering my key makes no difference.

xanadu
26-03-2017, 10:32 AM
OK fixed it now by restoring an old backup rom. I will stick with this now!

johnhenry
26-03-2017, 01:31 PM
I noticed the update 2.2.12 is now only for IKS, the Mscamd has gone back to patch 2.2.08.

I updated to Mscamd 2.2.12 a couple of days ago and found that I could not get Stations to open, at the time I just left it to see what would happen next.

Last night I updated back from Mscamd 2.2.12 ( of two days back) to the Mscamd 2.2.08 which is now the only one for Mscamd on the HTTP. I had to put my code back in also data backup. Thankfully all is now restored and working as normal.

xanadu
26-03-2017, 02:36 PM
I upgraded back to 2.2.08 via HTTP and is working good now.

Aldo
29-03-2017, 10:04 PM
There was also a query posted on another forum ref sw 2.2.08 -Mscamd by a member of this forum, and the reply he got from blackdevil was as follows:

Load it by usb stick and try again. sw 2.2.08 -Mscamd

and he was given a link to that software

_https://www.sendspace.com/file/qjzo60

and his reply yesterday was as follows: Thanks Blackdevil it works by the USB. Regards

so any other members having a problem with that patch could try the above and see if it works for you, I'm surprised that the member did not post this info, as it may help other users on this forum with the same or similar problem.

traveller
29-03-2017, 10:20 PM
I upgraded back to 2.2.08 via HTTP and is working good now.

Same. :)

tinto de verano
01-04-2017, 11:46 PM
2.2.12 MSCAMD working fine... but not available anymore, apparently only the IKS version... I wonder why_

I noticed now there is a 2.2.14 version available through HTTP, but it does not specify MCSAMD nor IKS... wondering why...

Thanks.

tinto de verano

rockero
02-04-2017, 06:16 PM
2.2.12 MSCAMD working fine... but not available anymore, apparently only the IKS version... I wonder why_

I noticed now there is a 2.2.14 version available through HTTP, but it does not specify MCSAMD nor IKS... wondering why...

Thanks.

tinto de verano

hi all...ive just upgraded to 2.2.14 a couple of hours ago through HTTP...its my first upgrade since june 2016 which was 2.1.41
things seem to be fine so far...its around 6 months since I last used the box
it looks slightly different at start up
I havnt tried to renew the gift which expired in February but the IPTV BONUS is working fine
I tried to upload a couple of pics of how it looks at start up but upload failed
hope this maybe helps some of you who were thinking of upgrading

c31
02-04-2017, 06:33 PM
have upgraded to 2.2.14 cant see any difference

tinto de verano
02-04-2017, 07:10 PM
Hi rocker, c3,

Thanks.

So, even if this time there is no mscamd in the filename for the new 2.2.14, mscamd is there, and mscamd works fine, right?

Thanks.

tinto de verano

Aldo
02-04-2017, 07:34 PM
Hi rocker, c3,

Thanks.

So, even if this time there is no mscamd in the filename for the new 2.2.14, mscamd is there, and mscamd works fine, right?

Thanks.

tinto de verano

Rockero will not be able to answer your query:

I havnt tried to renew the gift which expired in February but the IPTV BONUS is working fine

as he will not have mscamd available, so hopefully someone else will answer the query for you.

glenby
02-04-2017, 07:58 PM
hi all...ive just upgraded to 2.2.14 a couple of hours ago through HTTP...its my first upgrade since june 2016 which was 2.1.41
things seem to be fine so far...its around 6 months since I last used the box
it looks slightly different at start up
I havnt tried to renew the gift which expired in February but the IPTV BONUS is working fine
I tried to upload a couple of pics of how it looks at start up but upload failed
hope this maybe helps some of you who were thinking of upgrading
I would suggest that it's for mscam.I use iks and i've tried that update but there is no way to reinstall the iks key but there is for mscam.I've gone back to previous patch.

Weston Calling
02-04-2017, 08:17 PM
I've just upgraded to 2.2.14 and I can confirm mscamd seems to be working on Astra 28* East. I had to enter my code again.

The menus are different on the Conditional Access page and you need to click IP Sharing Protocol for options. Mscamd is one of the options and another is Superiks, so I guess it could work for Iks as well.

glenby
02-04-2017, 08:37 PM
I've just upgraded to 2.2.14 and I can confirm mscamd seems to be working on Astra 28* East. I had to enter my code again.

The menus are different on the Conditional Access page and you need to click IP Sharing Protocol for options. Mscamd is one of the options and another is Superiks, so I guess it could work for Iks as well.

I tried the update but it would not allow entry of key on superiks but does for mscam.So i concluded it may be for mscam only.

Weston Calling
02-04-2017, 08:44 PM
I tried the update but it would not allow entry of key on superiks but does for mscam.So i concluded it may be for mscam only.

The screen for Superiks is exactly the same as for Mscamd. So if you enter your code in active code line and press Fav to save, it will certainly be accepted. Whether Iks then works is another matter.

dogrose07
03-04-2017, 07:55 PM
I also upgraded to 2.1.14,thanks to black devil and team, for the upgrade and support as always.
Regards

tinto de verano
05-04-2017, 12:30 AM
Finally found the time to upgrade to 2.2.14, mscamd.

Thanks team, blackdevil.

Unfortunately, it seems... not very smooth, at least, on Astra 2C, not very stable at times (scrambled channel message).

We'll see how it goes tomorrow.

Lately 2.2.12 was very stable.

Thanks.

tinto de verano

hosemaria
05-04-2017, 12:48 AM
1.Mascam update
2.Google map start by London
3.Time shift and Epg fix proper. ( has two hours error before )
4.Mag Icon has different Domain ready in for some italian service
5.IPTV Icon has dome default for different service.

jeetley2
05-04-2017, 09:18 PM
Hi, A question was asked in the other forum about the improvement in the latest 2.2.14 patch. Blackdevil answer is as under:-

1.Mscamd service improved
2.Timeshift issue in stalkers portal revised
3.Go*gle maps ,default city :London
4.MAG Portal Panel, stalker portal changed (paid service)

We are trying to fix a perfect sw, then we will officially release it.
At the moment, we are trying to fix Mscamd & IKS service working as good as possible at these latest sw

For Mscamd service renew and stalker portlas infos :
Hitechbox HB9000 : IPTV Bonus --> watch ''Hitechbox HB9000 Info'' channel

tinto de verano
06-04-2017, 10:58 PM
Hi,

I noticed today on HTTP there is another 2.2.14 version, dated 06 April 17.

So I installed it... and I had to enter again Lat and Long, Time Zone and Time, Start Up channel.. and Mscamd code.

In a different place, with different name, I think... but found it, entered it and... it seems to be working without a single skip... perfectly stable... 3 hours now.

Great! Thanks blackdevil and team.

tinto de verano

Jacobo40
07-04-2017, 01:21 PM
Ditto at this end. The latest 2.214 version downloaded without a hitch, and with IKS, PowerVu and IP Bonus functioning as they should. Thanks to blackdevil.

vasf
08-04-2017, 08:49 PM
Hi there! I check for my new pach but I can't see it. I checked in HTTP but no luck. Can anybody help because I don't know what is going on?
Thanks.

tinto de verano
09-04-2017, 11:21 AM
Hi vasf,

I just checked HTTP, and I can see 2.2.14.

Sometimes they disappear, then they come back again. Keep trying, I would say.

Although I remember one occasion when I could not see a new version for a long, long time... even if people were talking about it... I was advised to downgrade to a previous version (maybe 2.0.8, not sure, sorry). The I could see the new firmware in HTTP, and managed to update to the latest version at the time.

Good luck.

tinto de verano

jbvid
09-04-2017, 04:56 PM
Hi there! I check for my new pach but I can't see it. I checked in HTTP but no luck. Can anybody help because I don't know what is going on?
Thanks.
Hi
Are you pressing 'Default Server' Red Button when you are in the HTTP Upgrade Menu?
jb

Aldo
09-04-2017, 06:22 PM
Hi
Are you pressing 'Default Server' Red Button when you are in the HTTP Upgrade Menu?
jb

As this is vasf first post and he has given such little info on his receiver, it would be hard to correctly tell him what to do, he may have a brand new receiver and has not yet followed the following procedure:

https://www.satpimps.co.uk/showthread...techBox-HB9000

carp
10-04-2017, 08:50 PM
Please explain where different place because i have no joy in finding that new place
I have put The Mscamd code in net client -red button MsCamd , says ok but does not open astra 28

jbvid
10-04-2017, 10:07 PM
Please explain where different place because i have no joy in finding that new place
I have put The Mscamd code in net client -red button MsCamd , says ok but does not open astra 28

Hi
Different place?? not needed, you download the latest Software/Firmware via the HTTP Upgrade Menu.
Which Software/Firmware version do you have showing in System Settings / System Information?
jb

carp
12-04-2017, 06:48 PM
Hi
Different place?? not needed, you download the latest Software/Firmware via the HTTP Upgrade Menu.
Which Software/Firmware version do you have showing in System Settings / System Information?
jb

2208 at the moment 2214 no mscamd working

jbvid
12-04-2017, 08:17 PM
2208 at the moment 2214 no mscamd working
Hi
Others in this thread have Mscamd 2.2.14 working fine.
jb

dog-man
12-04-2017, 08:36 PM
You do need to re-input your unique mscam code.

waverider
13-04-2017, 10:06 AM
28.2*E,Scrambled channels,wont open,everywhere else seems okay.
Went over to 13*E,came back and it was connected ,strange.