How to enter 3 digit vpid intelsat 907

[Tellboy1]

Hi, i use a technomate tm f3/5 ,i have successfully got hd channels working on intelsat 907 (im in tarragona spain), the HD channel vpids,apids are 4 digit, but standard channels are 3 digit? My box needs 4 digits, ive tried 0 then 3 digit number and tried the 3 digit number then 0, i cant find a way to leave 4th digit blank?

[KARABANGA]

Hi...Whats the reason why you are trying to change the audio/video settings..if you do a TP scan or blind scan it will automatically allocate the values for you.. If you need to change audio language then press the AUDIO button and select language if available. Regards,

[Tellboy1]

Thanks for reply, ive done a few blind scans, buy i have had to add channels manually, edit pids, i can only get hd channels working as non hd come up with message wrong audio/ video,: ie bbc3 etc.. But my receiver has room for 4 digit pids,pids for non hd channels are 3 digit, and wont accept 3 digits so i tried a zero at beginning and at the end,(didnt work). So thats why i was asking about how to enter a 3 digit pid for audio and video,im using intelsat 907 and got pids off lyndsat info.thanks again

[Mickha]

BBC 3 was scrapped, some time ago, and is now only available on the internet, at least I think so. I never watch British television.
BBC 4 only broadcasts afte 19:00 hours, before that it's C Beebies.

https://www.lyngsat.com/Intelsat-907.html

[KARABANGA]

Hi..The message NO AUDIO/VIDEO can usually mean one of the following:
1) The signal is open but not broadcasting anything.
2) The channel is on the wrong satellite but correct frequency..this can happen for example on satellites 19.2, 23.5 and 28.2 east which have some frequencies which are the same but will give you this message when satellite is incorrect Regards.

[holmroad]

27.5W channel set up is not as straightforward as most others guys, there are other posts too, but suggest you have a thorough read through this thread for further guidance, especially a post by manic01:-

https://www.satpimps.co.uk/showthread.php?164999-how-to-enter-biss-codes-for-27-5w

[echelon]

and stop trying to get non-existent channels like BBC3 (as MICKHA correctly pointed out)

[Tellboy1]

That post on satpimps was the post that helped immensely on initial setup attempts being that i am a novice at this and all novices need to start at beginning, so, ive got hd channels working fine, maybe the question should be now, are there any more channels broadcasting on 27.5 and if so,can anyone direct me to a post/ site where i can read up on procedure, you guys have much more knowledge of how and where to go and im just on 1st rung of ladder so thanks for bothering to reply, even if its just bbc4 after 7pm,

[Mickha]

Have you checked the lyngsat link?

https://www.lyngsat.com/Intelsat-907.html
They are all the channels available, on 27.5W.
11495 V 44100 DVB-S2 QPSK 9/10
You can check locally, to see if you have any chance of getting the UK spot beam, on 28.2E.
There are a number of channels on the Europe KU beam, but generally the best FTA, Free TO Air, channels are on the UK beam.

https://www.lyngsat.com/Astra-2E-2F-2G.html
There are also lots of channels, with an English Audio option, on other satellites, if you motorize your dish, or you could try using an IPTV option.