Fransat on vu+ Duo . Fransat sur vu+ duo

[Nozahic]

Good afternoon

I am a new member, I have a Fransat box with the card HD, I watch all my French channel but the box is not so good for recording, I had since few year a vu+ box, i settle this box but I can see my French channel, only have few channel like Vosges TV, Mont Blanc but I don't have TF1 , france2 , ect

I would like to know if someone can help me for settle that on my box, because I am French and will be please

Je parle français donc le seul réponse peuvent être en Français ou Anglais

Regards

[3tv]

oscam can read your card

[Nozahic]

I don't know, I am new and this product, it take me already a week just to have the channel on the good satellite

After that I don't know what to do, need help

What is it oscam

Regards

[Mickha]

Oscam is an Emulator.
I'm not sure it will be that easy, but you might as well load Oscam and try it.
You can start by reading the guides, provided by Lee, from Goldwafers:
https://www.satpimps.co.uk/showthread.php?133588-Dummies-guide-to-setting-up-Vu-Duo

You can find a suitable Oscam file here:
https://www.satpimps.co.uk/showthread.php?161009-Vu-Plus-community-BH-oe2-emus-(2013)-(2014)

Try a version posted bt A. You can load a few versions.

To install them you will need Filezilla, or other FTP program, you can use the one provided in the VU+ Control Centre:
https://www.satpimps.co.uk/showthread.php?168091-VuCC-Vu-Control-Centre-V0-8

To log in you will need your receivers IP address, you can find this in the receivers Menu, something like Setup, System, Network, LAN, Adapter Settings, it should look like 192.168.1.2.
Providing you have your VU+ connected to your router.
Once logged in click on the FTP tab.
On the left hand side you should see your PC's files, on the right your VU+ files.
Just navigate to the Oscam.ipk file, you have just downloaded, and drag, and drop them, into the tmp folder, on the lower right.
Once done go to your receiver, press the green button, followed by the yellow button, on your remote, and select the Manually install ipk files.
Select the Oscam file and press OK.
Wait for the receiver to finish loading it, and probably re-boot, then press your Blue Button, followed by the < > arrow button, and select Oscam.

[Mickha]

@Nozahic,
have you mangaged to install Oscam yet?
Have you found out if your Fransat card will work, in any other receiver, apart from the official Fransat receiver?

[Mickha]

I have finally found a post, regarding Frasat, from TJExcalibur:
"The Octagon SF4008 does support CI+ cam with the HD Freaks image. I use it for her indoors to watch Fransat with a CI+ module and Fransat card."

[3tv]

the ci+ cam is gathering dust here, oscam continues to update the card, if it ever fails though ive got the ci+ as a backup

[Mickha]

Which version of Fransat card do you have, 3tv?
Just read, on another forum, that they're turning off v4.0, and only using v5, and v6.

[Nozahic]

I was busy I will look tomorrow for oscam, because when I bought the box few year ago, the box was reading Sky card , but all the settle of the boxes has been done by a professional

I have the latest card from Fransat, i receive 3 week ago because my other car was V4

Thank to all of you for your help

[3tv]

Which version of Fransat card do you have, 3tv?
Just read, on another forum, that they're turning off v4.0, and only using v5, and v6.

v6, hopefully it will keep on working after v4 support stops.

[Mickha]

Analoguesat, on another forum, has provided a link, where you can check your cards number, to find out if it will be affected:

http://www.telesatellite.com/actu/49906-les-vielles-cartes-fransat-vont-devoir-etre-remplacees.html

[Nozahic]

I think I have oscam installed already on my box

Like you can see on the pic, in red at the bottom you can see oscam, but I don't have info on

And when i put my fransat card ( version 6 ) I have nothing the TV stay black

Regards6722467224

[Mickha]

If you press the Blue button, on your remote, you should get a list of installed cams.
Have you tried the card both ways? Chip facing up, chip facing down?
Please post a picture of the cams menu, which should read the card details.

[Nozahic]

Look à the pic. I have oscam but know witch version

[3tv]

Look à the pic. I have oscam but know witch version

you will need to edit your oscam server file, I would recommend first you add a more recent oscam if its been on there for a while. You will need to ftp into your reciever

[Mickha]

Your receiver states that you have 4 cams installed.
One should be the CI, Common Interface, the slot for a CAM, Conditional Access Module, but check the other 3, by bringing up the Cam menu, pressing the Blue Button, and then use the < > keys to highlight one of the cams and press the OK button to select it.

[Nozahic]

Dear Mickha

I will look at that tomorrow and pass you the info, I will take pic

Dear 3tv

How I do what you ask me to do, like I say I am new on this system. I have this thing on because when I bought my 3 box when I was living in Spain , i order them from a guy in UK who settle all for me , all my box was connect together and with 1 sky card connect all the box was working together

Thank you for your understanding

[3tv]

do you know your recievers web interface ip? if so type it into your browser. if the webinterface appears do you see a Oscam interface option?

[Nozahic]

Dear Mickha

I take this pic, hope that will help you

[Nozahic]

Dear 3tv

I am not sure what you has me, it take pic, can you let me know if it s that, other way can you explain what I need to do

Regards

[Nozahic]

Dear 3TV

Maybe it is that

[Mickha]

That looks like your receivers IP Address, with that you can connect, to your receiver, using programs like Filezilla, Dreamboxedit, the VU+ Control Centre and Dreambox Control Centre.

[Nozahic]

What you means ? I need to do something?

Regards

[Mickha]

Try downloading, and running the VU+ Control Centre, on your PC:
https://www.satpimps.co.uk/showthread.php?168091-VuCC-Vu-Control-Centre-V0-8

Just unzip it, using Winrar, Winzip, or the free 7-zip, then start up VUCC.exe.
Once it opens type in your receivers IP Address and click on connect.
This will allow you to use the various options, for connecting to your receiver.

[Nozahic]

Done I have that now, what I need to do

Regards

[3tv]

Dear Mickha

I take this pic, hope that will help you

select the common interface cam in the menu and hit ok, the cam should change from oscam to common interface cam. insert your card into the ci+ cam. I cant remember if it goes in chip up or chip down so try both.

leave it in for 30 mins to see if it up dates.

if not go back and restart Oscam.
on your computer browser type in your recievers ip address.

when the webinterace opens is there a further option for Oscam interface? is so access that and we can see what version your running

[Nozahic]

3tv , I done that and I am waiting now

Thank you

[Nozahic]

About the other thing Oscam, can you detail what I need to do exactly

Cheers

[3tv]

type the ip address 192.168.1.65 found on the receiver into your web browser

[Nozahic]

After over 30 minutes, screen �� still black

I put the IP address on my computer, after that , what I need to do after

[3tv]

After over 30 minutes, screen �� still black

I put the IP address on my computer, after that , what I need to do after

what is displayed on the web interface screen on your computer?

[Nozahic]

Look at that

[3tv]

is there an oscam interface option in the extras tab?

[Nozahic]

I can't see that

[Nozahic]

Maybe my version is too old

[3tv]

do you know your receiver username and password?

you could also try guessing your oscams port

192.168.1.65:8080
192.168.1.65.81

etc....

[Nozahic]

I cant remember the user name and password, like I say someone settle that for me

I try few combinations without success

Sorry , I am not so clever with that

Regards

[Nozahic]

Maybe that will help you, Mickha ask me to download

[Nozahic]

3TV

I know the user and password, I look on google on they are the one from the beginning

What I need to do this that

Regards

[3tv]

use the ftp option then find were your oscam files are located, try var/keys or var/etc/tuxbox....

[Nozahic]

We I click on ftp, I can't see something, what I need to do

They say I am log in but ftp nothing

Regards

[3tv]

connect first then ftp

[Nozahic]

Good evening

I am connect but when I click on icon FTP nothing happen, if I click on Yves other one, something come on

Regards

[Mickha]

It looks like you're clicking Settings Backup, not FTP.
FTP, File Transfer protocol, runs Filezilla, a program you can download separately, and for free.

[3tv]

is there a file zilla folder in your vucc directory?

[Nozahic]

I click on FTP few time but nothing, I don't know if I have Filezilla, I will download now and see
Where I need to see if I have FileZilla in my vucc directory
Thank you

[Nozahic]

I downloaded FileZilla, and I have that now

[3tv]

filezilla should be in the vucc folder and should open from vucc, if not open it manually and add your receiver login details

[Mickha]

You have downloaded the wrong version, of Filezilla, you want the Filezilla Client option, not the server.

https://filezilla-project.org/

[Nozahic]

I think I downloaded the good FileZilla

But I can find oscam

I try the 2 link you pass me 3TV but nothing

Need help

[Mickha]

Check in the etc folder, tuxbox, config, or var, tuxbox, config, you need to open the config folder.
3tv will need to provide the relevant files, as he has a working Fransat card.

[Nozahic]

I need to look for a file name Oscam ?? And I need to look everywhere in the right column

Cheers

[Nozahic]

I find that

Click on etc. Tuxbox. And after config

[Nozahic]

Hi 3TV

I don't have FileZilla in vucc folder, can open from vucc , but maybe I don't look properly for that, we are I need to click in vucc for see FileZilla

I manage to open FileZilla after downloaded the good one, and I find oscam.

What I need to do now

Regards

[Mickha]

You need to wait for 3tv to post the necessary files, or coding, for a Fransat card.
You can view your current files by right clicking, on the Oscam file, and selecting the View/Edit option.

[Nozahic]

When I click on the right like you say nothing come on

Also when I look vucc I have this message on, why ?

Regards

[Mickha]

No, when using Filezilla, and you have the config folder open, you right mouse click, on an Oscam file, and left mouse click on the View/Edit option.

[Nozahic]

Ok, I understand can't see in vucc when FileZilla open

I click on the right and open the file of oscam.srvid

You can see on the pic what they say

Regards

[Mickha]

That's one of the Oscam files, when 3tv posts back you'll know which files you need to edit, or just replace.

[Nozahic]

Ok, have a good evening

[3tv]

open the oscam.conf file,
it should contain something like this


[webif]
httpport = 88


yours might use a different port, just remember what it is.


open

your oscam.server


[reader]
label = Fransat
protocol = internal
device = /dev/sci0
caid = 0500
detect = cd
mhz = 450
cardmhz = 2700
aeskeys = 0500@041950:XXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXX
group = 1


you need to add the correct reader device, so oscam knows which card slot to read from

the aeskey also need adding, just replace the XXXXXXX...... then save

[Nozahic]

Dear 3TV

I have that on oscam.conf

[Nozahic]

This is a pic of my oscam sever

[3tv]

don't use notpad to view/edit, install editpad lite

[Nozahic]

Ok I need to download editpadlite and open with that ?

[Mickha]

3tv wants you to open the Oscam files with Editpad Lite, instead of Notepad, then edit, and save.

[Nozahic]

I download edit pad lite, but I can only open 2 oscam with, the other come automatically with notepad, how I can change that

Regards

[Mickha]

You need to change your PC's associations.
An easy method is to copy the files to your PC, right click, and select the Open With option, select Choose Default Program, and always use the selected program to open this type of file.

[Mickha]

I might have some good news for you Nozahic.
Analoguesat has just posted this, on ***********.uk:

"Interesting info from the DS forum - according to a couple of contributors the VTI image allows CI+cams to be used in the Duo. Reported working for Fransat & HD+ Germany.

Cant try my Vu+ Duo - the bloody thing expired a few months ago with a mobo fault and I have no idea if it can be resurrected at a sensible cost."


https://forums.digitalspy.com/discussion/2241864/fransat-on-vu-duo

[Nozahic]

Thank for that but I will try 3TV way because other way in need to buy a new system because you can't just put your card

[Mickha]

You don't need a new system, you just need a CI+ Cam, for Fransat, which you often get with the card.

[Nozahic]

Mickha , I didn't manage to do what you say to me but I did copy and put the text in elitpad, copy again and put back in text and the text look like in elitpad

3TV, I am not sure what I need to change because I find webfit http 10001

After I have 2 oscam sever , don't know witch one I need to change

Pic attach

Regards

[Nozahic]

Yes but I only have card because I bought the pack card + box
We will see if with 3TV he work, other way I will maybe buy this CI+ cam from Fransat

[3tv]

[reader]
label = Fransat
protocol = internal
device = /dev/sci1
caid = 0500
detect = cd
mhz = 450
cardmhz = 2700
aeskeys = 0500@041950:XXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXX
group = 1

paste the above into the oscam.server

replace the XXXXXXXXXXXXXXXXXXXXXXXXX with the aeskey

save it., close edit pad, there will be another dialogue box, click yes.

put your fransat card in the same slot as you used to use your sky card with.

now reboot your receiver. Hopefully fransat will now open, you can login into your oscam with 192.168.0.95:10002 to see what version your running. Hopefully its new enough to read the Fransat card.

[Nozahic]

Just a question, how I edit pad ? I am not sure about that. For the rest I think I understand now

Regards

[3tv]

Just a question, how I edit pad ? I am not sure about that. For the rest I think I understand now

Regards

open your files with editpad, paste required reader info then save.

[Nozahic]

This way is good ?

[Nozahic]

Also, how I reboot the box ?

Thank you guys

[Mickha]

Menu, Shut Down, Restart.

[Nozahic]

Just reboot the box , and I put the card in, nothing, still screen black

[Nozahic]

now reboot your receiver. Hopefully fransat will now open, you can login into your oscam with 192.168.0.95:10002 to see what version your running. Hopefully its new enough to read the Fran

I can't go to 192.168.0.95:10002
How you find this code

[Nozahic]

Good evening

Maybe it don't work because when I try to find the satellite and channel I change a lot of settings on the box , also I reset the box at factory setting

Maybe I can try to use one of my 2 other vu+ box and now I know what to do, it will be better. I can use also edidpate for do all the setting

What do you thing guys

I am worry I did some mistake on this box and it s for that the box don't work well

Regards

[Mickha]

Your latest image shows Common Interface, yet you're not using a CAM, try selecting Oscam and check that your card is the right way up, some readers have the chip facing upwards, some downward, try inserting it then press the Blue button and check if it's recognized.

[3tv]

now reboot your receiver. Hopefully fransat will now open, you can login into your oscam with 192.168.0.95:10002 to see what version your running. Hopefully its new enough to read the Fran

I can't go to 192.168.0.95:10002
How you find this code

you can only log into the ocam interface if you have the cam running, as Mickha has pointed out you have your cam set to common interface, change it to oscam

[Nozahic]

Hi guys

No success at the moment and I can't go see witch oscam I have

I was thinking because my 3 box was done by a professional who settled everything for we can have multiple rooms Sky UK in our villa in Spain, maybe is for that my settle don't work.

Like you can see I am not so cleaver with that and maybe my box need to be reboot from start but I don't know how to do that and maybe it will be don't complicate for me.

I live near Bristol, do you know a company who can do all this job for me, I can go or post my box or maybe where I need to look in yellow page

Thank for your help to both of you.

3tv , witch car you used, the série 4 or the new one série 6

Regards

[3tv]

using pc6 here

what error do you get when trying to log in with:
192.168.1.65:10002

[Nozahic]

Good morning

I try today and this time, something open when I tape 192.168.1.65:10002. I don't know why it open now, I try few time yesterday

Maybe because I turn on and off the box and left the box connect to internet. A update has been done

Below pic of what I have

Regards

[Nozahic]

I try me both card my old pc4 and also pc6

[3tv]

your oscam looks very old. Install a new version. rename the current oscam binary then save a more recent version in the same directory. look in usr/bin.

make sure your reader device is set to read from the correct card slot as well

[Nozahic]

Dear 3TV
That look complex to do, I can you explain more how to do that because I don't want to do mistake. Witch oscam I need ? It will be nice to know what to do step by step

Regards

[Nozahic]

I change the name of all the file oscam, by xxxxx binary. What I need to do with this file now ?

Where I find a new oscam, do you have a reference for that ? I need to put the new file oscam here also ?

Regards

[3tv]

I change the name of all the file oscam, by xxxxx binary. What I need to do with this file now ?

Where I find a new oscam, do you have a reference for that ? I need to put the new file oscam here also ?

Regards

leave those file names alone, its the oscam bin file you need to update.

there should be a version for you vu receiver on this site.

[Nozahic]

leave those file names alone, its the oscam bin file you need to update.

there should be a version for you vu receiver on this site.

Dear 3TV

Ok first thing done, change name

Where I need to look for Oscam bin file , how I do that ?

I need to look what on this website?

Regards

[Mickha]

I posted how to load a new Oscam in post 4, of this thread, and where to find them.

[Nozahic]

I posted how to load a new Oscam in post 4, of this thread, and where to find them.

Thank you Mickha, I will look at that and let you know if any problem

Regards

[Mickha]

You might want to back up some files, on your PC, as loading a new Oscam will overwrite the old ones, and if running a line make sure you have that information saved.

[Nozahic]

What file I need to backup on my computer

Regards

[Mickha]

Just back up your card information, or you'll have to type it again, and your CCcam.cfg file. if you're using a line, to open other channels.
It all depends on what you're using.

[Nozahic]

I put a new oscam, but still nothing

You can see on the pic below, what I did

Regards

[3tv]

looks like you have put the ipk file in the bin folder you haven't installed it

ftp into your usr/bin folder locate the file named oscam, rename it to oscam.bak


open the zip file from here - https://www.satpimps.co.uk/showthread.php?161009-Vu-Plus-community-BH-oe2-emus-(2013)-(2014)&p=961436&viewfull=1#post961436

it contains a oscam file, ftp the oscam file (not the zip file)put it in your usr/bin folder. change file permissions to 755 save and exit. reboot your reciever

[Nozahic]

looks like you have put the ipk file in the bin folder you haven't installed it

ftp into your usr/bin folder locate the file named oscam, rename it to oscam.bak


open the zip file from here - https://www.satpimps.co.uk/showthread.php?161009-Vu-Plus-community-BH-oe2-emus-(2013)-(2014)&p=961436&viewfull=1#post961436

it contains a oscam file, ftp the oscam file (not the zip file)put it in your usr/bin folder. change file permissions to 755 save and exit. reboot your reciever


I have to oscam in usr/bin. Oscam or oscam-emu. Witch one I need to change the name to xxxx.bak

Pic in next answer because I have another question ?

[Nozahic]

Witch one I need to download? Also you say ftp the oscam file, what you means ? And I need to put this file in urs/bin using FileZilla? Where I need to go for change file permissions?

Sorry again but I am sound maybe stupid, but like say few time, I don't have a clue what I am doing

Regards

[3tv]

Witch one I need to download? Also you say ftp the oscam file, what you means ? And I need to put this file in urs/bin using FileZilla? Where I need to go for change file permissions?

Sorry again but I am sound maybe stupid, but like say few time, I don't have a clue what I am doing

Regards

google, I cant baby you through every single step.

[Nozahic]

google, I cant baby you through every single step.

Sorry but like I say I was bad with that. I know what it is ftp now, it s to transfer the file from computer to box file

But I still need you help for know witch Oscam I need to change the name because like you can see I have 2 of them where you ask me to change the name

Also and the link you pass me to download Oscam, you have few of them, I just ask witch one I need to do because I don't want to do a mistake

Regards

[Nozahic]

Also I understand it is not easy for you guys to explain to me because I am bad but I been honest since the start I always say I was bad, and it s for that I ask if you maybe knew people who can do it because I am ready to pay for have that done. Hope you understand and you are not so cross about me

[Mickha]

To manually install an Oscam.ipk file you transfer it to the tmp folder, not the bin folder.
Did you read post #4, in this thread?
"On the left hand side you should see your PC's files, on the right your VU+ (https://www.goldwafers.co.uk/Vu-Vuplus/) files.
Just navigate to the Oscam.ipk file, you have just downloaded, and drag, and drop them, into the tmp folder, on the lower right.
Once done go to your receiver, press the green button, followed by the yellow button, on your remote, and select the Manually install ipk files.
Select the Oscam file and press OK.
Wait for the receiver to finish loading it, and probably re-boot, then press your Blue Button, followed by the < > arrow button, and select Oscam."

[3tv]

To manually install an Oscam.ipk file you transfer it to the tmp folder, not the bin folder.
Did you read post #4, in this thread?
"On the left hand side you should see your PC's files, on the right your VU+ (https://www.goldwafers.co.uk/Vu-Vuplus/) files.
Just navigate to the Oscam.ipk file, you have just downloaded, and drag, and drop them, into the tmp folder, on the lower right.
Once done go to your receiver, press the green button, followed by the yellow button, on your remote, and select the Manually install ipk files.
Select the Oscam file and press OK.
Wait for the receiver to finish loading it, and probably re-boot, then press your Blue Button, followed by the < > arrow button, and select Oscam."

the oscam I linked to (post 22) contains only the oscam binary file so can be dropped into the usr/bin folder. it wont replace any other files

[Nozahic]

Dear mickha

Yes I read few time your link in post 4 but not always easy to understand and they give you 4 different Oscam to update . Not sure witch one to choice

Dear 3TV

I find I manage to do what you ask me , pic below and I change the setting permission to755 like you say
I drag the file from my computer to remote site and my right user/bin

After that what I need to do

Regards

[Nozahic]

Dear Mickha

I try to do what you say to me and I understand from your link page 1 , but I have that in results and I don't think that is good

Sorry but it look like I am so stupid with this staff.

If both of you don't want to reply anymore I will understand and I will bin this box because I am so bad with that. Other way I will try again and again because I don't like to give up and I hope I will manage soon with all your help

Good evening

[Mickha]

That's CCcam230, not Oscam.
You aren't stupid, just learning, we've all been there.
Can you please post which Oscam file you are dragging into your tmp folder.
3tv's link isn't a .ipk file, and can't be loaded automatically.
As 3tv has a Fransat card, that's working on his VU+ receiver, follow his instructions, of placing his file in the user folder, bin sub folder, using Filezilla.
Just drag the Oscam file, from your PC, and drop it in the bin sub folder.
Hopefully 3tv can get your card working.
Does the VU+ Duo card reader have the chip facing downwards, or upwards?

[Nozahic]

Thank Mickha for your kind word but it is not easy to learn, but I suppose it s like a lot of new thing. But I don't give up like that.
I will look the again the file of 3TV and move his file. But I was not sure witch one to move because and the link I can see 2 files but I will look again tomorrow and try my best and let you know

Have a good evening

Regards

[3tv]

the file I pointed to in post 22 in the oscam thread contains a zip file with 1 file inside named oscam. no idea what file your using.

[Nozahic]

Ok Guys

I download on my computer the file name Oscam 11357 + .............

This was on the left side of my FileZilla, I pass this file on my right way to \usr/bin and I change the file permission to 755.

Hope that is good , what I need to do after

Regards

[Mickha]

You seem to have downladed the wrong one, 3tv said post #22, not #23.
A .tgz file is strictly for Blackhole, you install it like a .ipk file except you select Manually Install blackhole, not Manually install ipk.

[Nozahic]

Hope this time is good, I open the good file ref of 3tv number 22, I unzip and safe the file on my do***ents on computer ( left ) and after that I move the file oscam to usr/bin and change the code to 755

What I need now

Cheers

[3tv]

reboot your reciever and log into oscam via the oscam interface you should now be running the upto date version

[Nozahic]

Hi all

I reboot my box by turning off by the button at the back

After that nothing special, still have few channel like Vosges, Mont Blanc but not the fransat channel

I try to log to my computer, I try 2 computer but I can't open nothing

Pic below

[Nozahic]

Also you can see on the pic, as am has been change on the box because I been to Oscam conf file and as am server file and all the thing 3TV ask me to change , change again. I need to change again that ?

And maybe my code 192. Ect. Change also

Regards

[Mickha]

In your attached picture you have 192.168.1.95:10002, yet in a previous post you posted:

"now reboot your receiver. Hopefully fransat will now open, you can login into your oscam with 192.168.0.95:10002 to see what version your running. Hopefully its new enough to read the Fran

I can't go to 192.168.0.95:10002
How you find this code"

[Nozahic]

I try all the code with at the end 1001 or 1002 or 8888 but nothing open like last time

195.168.1.65. 195.168.0.95

I am lost but like show on my previous pic a lot of thing change on my Oscam file

[3tv]

I try all the code with at the end 1001 or 1002 or 8888 but nothing open like last time

195.168.1.65. 195.168.0.95

I am lost but like show on my previous pic a lot of thing change on my Oscam file


have you installed a ipk over the top of your previous install, that will explain why the oscam.server files have been changed? you will need to add the fransat reader info again.

has your receiver ip changed?

[Nozahic]

I think I update a new ipk file , I think Mickha was talking about that.

About the Fransat change I need to write that to all of them , like before or to just one time and delete all the other thing who are on my Oscam.serv file . Because you have a lot now on my new Oscam serv file.

I will look on my box if my ip change

Regards

[Nozahic]

also i still connect to fileZilla with 192.168.1.65

and on the vu+ Dreambox Webcontrol under Extra / Device info , i have that :


Network Interface (eth0)



Mac Address:

None



DHCP enabled:

False



IP:

192.168.1.65



Netmask:

255.255.255.0



Gateway:

192.168.1.1

[Nozahic]

i have that in my oscam file : ( i need to change the info to the 3 reader or just the first one and delete the rest



[reader]
label = Focussat-Conax
enable = 0
protocol = internal
device = /dev/sci0
pincode = 1234
services = focussat,!freesatviaccess,!freesa tconax
lb_whitelist_services = focussat
caid = 0B02
ecmwhitelist = 4E,53,60,65,72,84,9C,97,8A
detect = cd
ident = 0B02:000000
group = 2
emmcache = 2,2,2,1
blockemm-unknown = 1
saveemm-u = 1
saveemm-s = 1
saveemm-g = 1


[reader]
label = TVR-Freesat-Viaccess
enable = 0
protocol = internal
device = /dev/sci0
services = !focussat,freesatviaccess,!freesa tconax
lb_whitelist_services = freesatviaccess
caid = 0500
ecmwhitelist = 2F,61
detect = cd
ident = 0500:025900,025910,FFF720
class = 0a,1e
group = 3
emmcache = 2,2,2,1
blockemm-unknown = 1
saveemm-u = 1
saveemm-s = 1
saveemm-g = 1
auprovid = 025900

[reader]
label = TVR-Freesat-Conax
enable = 0
protocol = internal
device = /dev/sci0
pincode = 1234
services = !focussat,!freesatviaccess,freesa tconax
lb_whitelist_services = freesatconax
caid = 0B02
ecmwhitelist = 67
detect = cd
ident = 0B02:000000
group = 4
emmcache = 2,2,2,1
blockemm-unknown = 1
saveemm-u = 1
saveemm-s = 1
saveemm-g = 1

[3tv]

if you don't have any of those cards then just delete them

[Nozahic]

Ok, I delete them and put what you say to me b4 for Fransat , correct ?

[Nozahic]

I change the Oscam server configuration, what I need to do now

Regards

[Nozahic]

I still can't access to oscam web interface, I don't know why . Need help,

[Nozahic]

Hi guys

Hope you are ok ? I still need your help because I am lost now because it look like nothing is working properly since I try this update

Can you help me please

Cheers

[Mickha]

Can you please post a picture, of your receiver, showing the cams, by pressing the Blue key, on your remote.
This will show which version you last loaded, and have selected.

[Nozahic]

Hi Mickha

Thank you for your reply. Below pic of the Oscam

But I notice if I press <>. I have to new Oscam Oscam-emu11233. And Oscam 11233

Maybe I need to change this settle because it look like I am on my old Oscam , like I post to you few days ago

Regards

[3tv]

Hi guys

Hope you are ok ? I still need your help because I am lost now because it look like nothing is working properly since I try this update

Can you help me please

Cheers

try switching to the new oscam and login to the interface, if that doesn't work

copy all the config files, oscam.server, oscam.conf etc to your pc then place them in usr/keys and reboot, then see if you can login into the oscam interface.

if none of those work try a different oscam, google for oscam compatible with your image. post back here once you have it running with access to the web interface.

[Nozahic]

Ok I will try that but other way I will connect one of my other box and see if I am more lucky with the web interface

[Nozahic]

Hi Guys

I try everything with my box for have a web interface but nothing work, 😪

I decide to connect one of the other box, and I mange to find the satellite and put all the channel ( on my own, good step ) 😉

Now I put the web interface pic I take on the computer with all the settle. Maybe you will see why we have a problem

Also just for remind you , this 3 box was working and sharing a sky card in Spain. Maybe the settle of the web interface need to be change

Regards

[Nozahic]

I send a email to the company who settle the box for me when I was in Spain because for me this Oscam work but because this guy settle my 3 box together for work with sky card , maybe the settle on the web interface don't work when I put the Fransat card because the settle is fix for sky card. I look a little in the web interface and everything is for sky card, all the channel, card name ect.
I will let you know when it reply or maybe you have a idea to change that
Regards

[Nozahic]

Good evening

The guy of the company reply to me and we exchange few email, it look like my Oscam is maybe too old for read the Fransat card. I need a new Oscam setting who work with Fransat , the guy say to me you have a lot of Oscam and he is not sure witch one will work with Fransat.

Now sorry to be little blonde or stupid, I would like to know if I can have a Oscam who will work with Fransat, and explain to me how to do this update properly because and the last box , it look like I update so many thing, my box is lost now 😂😂😂

I know it will take some time of you but I am new and try to learn and it is not easy. ( also I don't need to change other thing in my box )

Thank you in advance for your reply and good evening

[sonic1]

The thread is very confusing, do you know if you have Viaccess or Conax card to start with ?

[Nozahic]

The thread is very confusing, do you know if you have Viaccess or Conax card to start with ?

Like I say I am new on that, I don't know : how I can look at that ? Maybe I can look and let you know

Sorry can be more clear

[Mickha]

He has stated that it's a Fransat card, used on 5 West, so it's Viaccess 4.0 encryption.
He does have an official receiver, in which the card works, but not an official Viaccess CI+ Cam, hence the attempt to get it working using his VU+ receiver and Oscam.

[3tv]

The thread is very confusing, do you know if you have Viaccess or Conax card to start with ?

my head is battered trying to help the guy. Stuff gets lost in translation :(

think the easiest solution would be for him to install a repository panel such as tspanel, check his receiver information-about to determine the image running then search the panel for oscam that's compatible with that.


edit:

or flash a new image containing a recent version of oscam.

[Mickha]

He's currently running a very early version of Blackhole, which I think was set up for him.
I also seem to remember him using the 3 receivers to share a Sky card.
It might be better if he installs the same image as you, 3tv, and the same version of Oscam, as you're the only one with a Fransat card, that's working.

[3tv]

im using a solo 4k version from SU that's using the new Biss mod, I just drop the oscam binary into the usr/bin folder and reboot, I haven't touched my config files for ages. My fransat reader info is already posted in this thread but have no idea if its been implemented correctly as I noticed a few images back he had it opened with notepad, which is just asking for trouble :(

were ****ing in the wind until Nozahic gets the interface running so we can see if its reading the card correctly via the logs

[Nozahic]

Hi all

And thank you for you message, I understand this situation is not easy for you because I am not so good

I will try few thing for find more info and let you know, the guy who settle my box, say my oscam is working fine, he still used that for do his box at the moment

Regards

[Mickha]

Is he using a Fransat card, on his VU+ receiver?
Oscam is an emulator, used for numerous cards, and other things.

[Nozahic]

Sorry guy

I am a slow learner but I learn, after I mess about my first box, I manage to settle my second box, now I need your help for the final touch

Let me know what you need from my box and i will try my best for pass you the info

Regards

[3tv]

you now have access to oscam interface after upgrading to as newer version?

[Nozahic]

Waiting to know witch version I need, maybe you can give me a version

Regards

[3tv]

Waiting to know witch version I need, maybe you can give me a version

Regards going around in circles now.

[Nozahic]

Good afternoon

I try to put a new Oscam, the one 3TV talk about ref 22, when I unzip the file I have 5 files

Oscam.conf
Oscam.server
Touch
Tuxtxt2.conf
Oscam

At the moment I transfer all this file to /usr/ bin. I did turnoff my box after

And when I want to open the interface nothing again. I am lost because this morning my interface was opening but now nothing

Someone can help

Regards

[Mickha]

You are still downloading the wrong file, I have posted this before, please make sure that you're downloading the file in post #22.
The Who Downloaded information shows that you have downloaded the file, in post 22, 4 times, and downloaded the file, in post 23, 8 times.

[Nozahic]

I download the post 22 of 3TV after I download I unzip and I have 5 file like say in my last post

I put all of them ? That is good or just need to only few of them

Also when I put back my box on, I have this message, good or bad, I am still waiting

Regards

[Mickha]

Why have you set up the EPG option?
This time don't download the file, instead select the open option, and you should then only have one file.
I think you're selecting the wrong file.
https://www.satpimps.co.uk/showthread.php?161009-Vu-Plus-community-BH-oe2-emus-(2013)-(2014)&p=961436&viewfull=1#post961436

[3tv]

I download the post 22 of 3TV after I download I unzip and I have 5 file like say in my last post

I put all of them ? That is good or just need to only few of them

Also when I put back my box on, I have this message, good or bad, I am still waiting

Regards

the process seams to be beyond your abilty. your better off installing a new image that includes oscam or a panel to install it.

[Nozahic]

Dear Mickha

I didn't set up EPG options, like I say I just put the 5 file and reboot my box

At the end 3TV say it s too hard for me, now I will try to put a image with Oscam

I will find that on google

I have a question because all my box has been settle from someone, can I delete all and try to build a new one, because for me it look like a lot of interference from how my box has been settle

Regards

[Mickha]

https://www.satpimps.co.uk/showthread.php?133588-Dummies-guide-to-setting-up-Vu-Duo

https://www.satpimps.co.uk/showthread.php?131480-How-to-Update-image-using-USB-Pen-Drive

Hopefully 3tv will recommend a suitable image, Openvix might have the option to download Oscam, via the menu, but I haven't tried it.

[Nozahic]

i will wait for see if 3tv can pass a good image, other way i will try to find on google

i connect myself to a french forum this afternoon, we will see what they say

[Nozahic]

i need a new image with Oscam in ? or you download image and after oscam

because i think 3tv say to download image with oscam

[3tv]

no idea which image recommend on v1 duo recievers, have a look on satuniverse

[Nozahic]

Thank guys

Tomorrow I will try to put a new image and oscam on the first box where I mess up everything, we will see the result and I will let you know when is finished

It will take maybe few days because I need to find the image and oscam and also to learn how to do. I will read the info Mickha you send me about that.
What is it the best black hole or openvix ?

Regards

Alain

[Mickha]

Blackhole is based on the official image, and you have to manually load Oscam, so try Openvix, unless the French forum can provide better information.

[Nozahic]

I download Openvix and my box, and settle everything, I have few channel on like before

Now I am fighting like crazy to download ccam and oscam on. I google to see and try but nothing happen, when I go to blue and vix and install local extension, nothing why ?

It was very good to settle openvix because I understand more now about how the box work, but I don't know to put this oscam, help please

Regards

Alain

[3tv]

you have connection to the internet set up. if so


menu - plugins - download plugins?

you don't need cccam

[Nozahic]

Good evening

Below some pic

The first pic is what I have on my pic with the 192.168....

The 2 other is what I have on my TV with what 3TV you ask me to do, I didn't did more because I don't want to do mistakes

What I need to do

Regards

[Mickha]

Click on the softcams.

[Nozahic]

I have that , what I need to do now, we are moving and I learn so much, thank guys

[3tv]

first oscm 1.2 svn11384

[Nozahic]

Hi
I click on and they ask me to download, I say yes, what I need to do after

How I know if the download was good ?

Regards

[3tv]

Hi
I click on and they ask me to download, I say yes, what I need to do after

How I know if the download was good ?

Regards

did it install it? now reboot and check your softcam menu

[Nozahic]

Hi

I reboot the box and I have that now on my TV screen 📺, good ?

What I need after that

Thank

[3tv]

Hi

I reboot the box and I have that now on my TV screen ��, good ?

What I need after that

Thank

green to start

have a look in your web interface, see if the oscam interface can be accessed from there.

if not you can login to your box and edit the oscam.server file via ftp. don't use notepad

[Nozahic]

Good evening

When I press the green, I have this message

Where I need to look exactly in the web interface for find Oscam

Other wait I need to go to 192.168 xxxx and try to find the Oscam file ?

Regards

[3tv]

left hand side, extras in web interface

[Nozahic]

If I go to FileZilla, I click on ect/tuxbox/config

The file is empty

Also on my web interface, I don't know where to look for see Oscam

Cheer guys

[3tv]

look in var/keys

[Nozahic]

On the interface I find that maybe it will help us, did nothing yet because I don't want to do mistakes because I think we are close

In the extra interface, I go to setting / package

You have 4 sub. Update / Installed / All / more And you have search

I can see some Oscam file under all when I tape Oscam and search. I can't see them under Update or Installed

Under the section More you have 2 option : update from feed ( don't know what is it ?)
Upgrades all packages

Because under all I can see my Oscam file, I was thinking if I go to more section and accept to upgrades all packages, maybe after I will have my Oscam on, what do you think ?

Cheers

[3tv]

whats in var/keys folder?

[3tv]

ftp the attached files to

/etc/tuxbox/config

then reboot, check softcam menu to see if oscam is there then activate/start it.

if it doesn't work add the config files to

/var/keys/

then reboot

the oscam interface is set to port 8888

[Nozahic]

When I go to /var and after keys. It switches to usr/keys and no file

Regards

[3tv]

install configs

[Nozahic]

Ok, I will do that today and let you know

Regards

[Nozahic]

See pic below I mange to install your Oscam conf. in the place you ask me. Turn off the box and start again

What I need know

Regards

[3tv]

file permissions set to 644?

the correct location for your image may be
var/etc/tuxbox/config

have you tried starting the cam then logging into the oscam interface?

[Nozahic]

I change to 755 like you say b4

I put the file in var/etc/tuxbox\config

I can't ope the Oscam interface when I do 192.168.1.14:8888

Sorry about that

I have few new think on the TV screen when I go like last night menu , setup, softcam, softcam manager

I can see something in active, yesterday nothing

Regards

[Nozahic]

Sorry 3TV but I just reboot again my box and when I come down to computer, I open Oscam web interface

Pic below

[3tv]

whats it say in live log? is the card working ok in your fransat compatible receiver?



how many card slots on the vu+ duo?

[Nozahic]

My card work fine in my Fransat box, I have 2 card slots

Pic of live log, not sure what say they

Regards

[3tv]

check live log while removing and reinserting your card

[Nozahic]

Maybe a stupid question, but I need to turn off my box when I do that

[3tv]

no,
you can alos use the resart option top left in the oscam RESTART - RESTART - OK

can you use the save log option, i cant read the screen photo.

check to make sure all files in the config folder have permission set to 644



if it still doesn't work you will have to try a different oscam

this is for oe1.6 images (im guessin the vix image you installed was a 0e2.0 image? but ive included a oe1.6 version also)

just rename the oscam file that's in the usr/bin to oscam.bak before you add this new oscam

then change file permission to 755 and reboot

[Nozahic]

Hi

This is what I have without a card in the box on my Oscam livelog, status, live log, I can't open save log on my computer

I will send now what I have with my card in

Regards

The permissions was on 755, I change to 644 like you say

[Nozahic]

Now I put back my card in, I change all the configuration to 644.

You will see what I have below on pic.

Also I have that who came on my config file under ect/tuxbox

Oscam.ccache. I was not here before. Because I only download the 7 Oscam file in config. The one you pass to me yesterday.

I know you say to me to put the new Oscam if the thing didn't work, but I prefer to send you this info first.

And if you give me the yes, I will transfer your info later

[3tv]

does your receiver have 2 card slots?

[Nozahic]

Yes

[3tv]

you can change sci1 to sci0 in the oscam.server to change readers, it shouldn't matter which reader your using though.



the only other thing I could suggest is from the oscam interface select CONFIG then DVB-Api and change PMt mode from 0 to 3 then save.

after that restart -restart -ok

[Nozahic]

at the moment i have that in my live log

2017/10/02 14:15:18 00000000 s (main) System name = Linux2017/10/02 14:15:18 00000000 s (main) Host name = vuduo2017/10/02 14:15:18 00000000 s (main) Release = 3.9.62017/10/02 14:15:18 00000000 s (main) Version = #1 SMP Sun Jun 11 15:51:09 BST 20172017/10/02 14:15:18 00000000 s (main) Machine = mips2017/10/02 14:15:18 00000000 s (main) Stb model = dm80002017/10/02 14:15:18 00000000 s (main) Stb vumodel = vuduo2017/10/02 14:15:18 00000000 s (main) Stb boxtype = vuduo2017/10/02 14:15:18 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 83872017/10/02 14:15:18 00000000 s (aes) 2 AES key(s) added on reader Fransat for 0500@0419502017/10/02 14:15:18 00000000 s (config) userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled2017/10/02 14:15:18 00000000 s (main) signal handling initialized2017/10/02 14:15:18 00000000 s (config) 10 provid's loaded2017/10/02 14:15:18 00000000 s (net) cccam: initialized (fd=4, port=12000)2017/10/02 14:15:18 00000000 s (reader) Fransat [internal] creating thread for device /dev/sci12017/10/02 14:15:18 3E1B4798 r (reader) Fransat [internal] Reader initialized (device=/dev/sci1, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz)2017/10/02 14:15:18 3E1B4798 r (reader) Fransat [internal] Reader sci internal, detected box type: vuduo2017/10/02 14:15:18 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)2017/10/02 14:15:18 00000000 s (main) waiting for local card init2017/10/02 14:15:18 231E85B7 h (webif) webif: decompressed 176767 bytes back into 435224 bytes2017/10/02 14:15:18 231E85B7 h (webif) HTTP Server running. ip=0.0.0.0 port=88882017/10/02 14:15:20 00000000 s (main) init for all local cards done2017/10/02 14:15:20 00000000 s (emmcache) loaded 0 emmcache records from /tmp/.oscam/oscam.emmcache in 1 ms2017/10/02 14:15:20 00000000 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 0 ms2017/10/02 14:15:20 00000000 s (anticasc) anti cascading disabled2017/10/02 14:15:20 4B3E7188 c (client) plain dvbapi-client granted (dvbapiau, au=auto (2 reader))2017/10/02 14:15:20 4B3E7188 c (dvbapi) dvbapi channelcache loaded from /var/tuxbox/config/oscam.ccache2017/10/02 14:15:20 4B3E7188 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum amount of possible filters is 32 (oscam limit is 32)


after i change the sci1 to sci0, i have that : a lot more info

2017/10/02 14:19:26 00000000 s (main) System name = Linux2017/10/02 14:19:26 00000000 s (main) Host name = vuduo2017/10/02 14:19:26 00000000 s (main) Release = 3.9.62017/10/02 14:19:26 00000000 s (main) Version = #1 SMP Sun Jun 11 15:51:09 BST 20172017/10/02 14:19:26 00000000 s (main) Machine = mips2017/10/02 14:19:26 00000000 s (main) Stb model = dm80002017/10/02 14:19:26 00000000 s (main) Stb vumodel = vuduo2017/10/02 14:19:26 00000000 s (main) Stb boxtype = vuduo2017/10/02 14:19:26 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 86552017/10/02 14:19:26 00000000 s (aes) 2 AES key(s) added on reader Fransat for 0500@0419502017/10/02 14:19:26 00000000 s (config) userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled2017/10/02 14:19:26 00000000 s (main) signal handling initialized2017/10/02 14:19:26 00000000 s (config) 10 provid's loaded2017/10/02 14:19:26 00000000 s (net) cccam: initialized (fd=4, port=12000)2017/10/02 14:19:26 00000000 s (reader) Fransat [internal] creating thread for device /dev/sci02017/10/02 14:19:26 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)2017/10/02 14:19:26 00000000 s (main) waiting for local card init2017/10/02 14:19:26 3E1B4798 r (reader) Fransat [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz)2017/10/02 14:19:26 3E1B4798 r (reader) Fransat [internal] Reader sci internal, detected box type: vuduo2017/10/02 14:19:26 231E85B7 h (webif) webif: decompressed 176767 bytes back into 435224 bytes2017/10/02 14:19:26 231E85B7 h (webif) HTTP Server running. ip=0.0.0.0 port=88882017/10/02 14:19:27 3E1B4798 r (reader) Fransat [internal] card detected2017/10/02 14:19:28 3E1B4798 r (reader) Fransat [internal] ATR: 3F 77 18 00 00 D3 8A 40 01 64 90 00 2017/10/02 14:19:30 3E1B4798 r (reader) Fransat [internal] Buffers readed 0 bytes total time_us 28893012017/10/02 14:19:30 3E1B4798 r (reader) Fransat [internal] Init card protocol T0, FI=1, F=372, D=12, N=02017/10/02 14:19:30 3E1B4798 r (reader) Fransat [internal] Calculated work ETU is 6.89 us reader mhz = 4502017/10/02 14:19:34 3E1B4798 r (reader) Fransat [internal] Buffers readed 0 bytes total time_us 30992992017/10/02 14:19:34 3E1B4798 r (reader) Fransat [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)2017/10/02 14:19:35 3E1B4798 r (reader) Fransat [internal] using ecm #811 for long viaccess ecm2017/10/02 14:19:36 3E1B4798 r (reader) Fransat [internal] type: Viaccess (non-standard atr), caid: 0500, serial: ##########2017/10/02 14:19:36 3E1B4798 r (reader) Fransat [internal] providers: 5 (FFF400,041950,041960,041970,0419 80)2017/10/02 14:19:36 3E1B4798 r (reader) Fransat [internal] Maturity level [7]= older than 7 years2017/10/02 14:19:36 3E1B4798 r (reader) Fransat [internal] ready for requests2017/10/02 14:19:36 3E1B4798 r (reader) Fransat [internal] found card system viaccess2017/10/02 14:19:36 3E1B4798 r (reader) Fransat [viaccess] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 12017/10/02 14:19:36 3E1B4798 r (reader) Fransat [viaccess] card detected2017/10/02 14:19:36 3E1B4798 r (reader) Fransat [viaccess] serial: ##########2017/10/02 14:19:37 3E1B4798 r (reader) Fransat [viaccess] provider: 1, id: #####################, sa: ########, geo: empty2017/10/02 14:19:37 3E1B4798 r (reader) Fransat [viaccess] provider: 2, id: ############################, sa: ########, geo: FF FF FF FF 2017/10/02 14:19:37 3E1B4798 r (reader) Fransat [viaccess] class: FA, expiry date: 2017/09/01 - 2018/09/012017/10/02 14:19:37 3E1B4798 r (reader) Fransat [viaccess] class: FA, expiry date: 2017/03/01 - 2018/03/032017/10/02 14:19:38 3E1B4798 r (reader) Fransat [viaccess] provider: 3, id: ###########################, sa: ########, geo: FF FF FF FF 2017/10/02 14:19:38 3E1B4798 r (reader) Fransat [viaccess] provider: 4, id: ###########################, sa: ########, geo: FF FF FF FF 2017/10/02 14:19:38 3E1B4798 r (reader) Fransat [viaccess] provider: 5, id: ###########################, sa: ########, geo: FF FF FF FF 2017/10/02 14:19:39 00000000 s (main) init for all local cards done2017/10/02 14:19:39 00000000 s (emmcache) loaded 0 emmcache records from /tmp/.oscam/oscam.emmcache in 0 ms2017/10/02 14:19:39 00000000 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 0 ms2017/10/02 14:19:39 00000000 s (anticasc) anti cascading disabled2017/10/02 14:19:39 2E06AB56 c (client) plain dvbapi-client granted (dvbapiau, au=auto (2 reader))2017/10/02 14:19:39 2E06AB56 c (dvbapi) dvbapi channelcache loaded from /var/tuxbox/config/oscam.ccache2017/10/02 14:19:39 2E06AB56 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum amount of possible filters is 32 (oscam limit is 32)


at this atge i didnt change the last think you ask, because maybe that will help you already

regards

[Nozahic]

I have this file in my config file Oscam.ccache, I need to delete this file ? Or it is not important

Regards

[Nozahic]

I did your last change you ask just for see, and I have the channel good now , so happy ��

Thank a lot guys, it was a hard work but we manage to do, and I learn a lot. I don't know how I can send thank you to you, it was amazing

Cheers

I will have maybe few questions but I will look on google before

[3tv]

Changing pmt to 3 fixed it? Thank f#k its working :o)

[Nozahic]

Yes it is that who change all. After I change the pmt and reboot it was ok.

Thank you so much again for your help and patience ��

[Nozahic]

Hi guys

I have a little problem, I think
I lost one channel, BFMBusiness tv, since few days and I try to have back with download channel again but now when I put back my box on, I go to choice the Oscam and after I have my channel on ( still no BFMBusiness tv ) but if I change channel, I lost my channel and if I go back my channel is lost also, I need to reboot the box and choice my channel , choice my Oscam to watch , can’t move to other channel

If you can help me , it will be very appreciated, I know if was not easy last time but hope this time it will be quick

Regards

Alain 678766787767878

[Nozahic]

Hi guys

With all your old messages I manage to put back my box on, and it work fine, I can change channel without a problem.
My only concern it is for BFMBusiness channel, I still don’t have. If I look on lynsat BFMBusiness channel is 11596v ect.
On my tv is 11595v ect. I don’t know how to change that. Maybe you can help me.
In my tv room I have a normal Fransat box and I still have BFMBusiness on.

Regards

Alain

[Mickha]

Try manually re-scanning it in, along with BFM Sport, and BFM Paris, on 11595 V 29950 DVB-S2 8PSK 2/3

[Nozahic]

Dear Mickha
Thank for your reply, I need to go to menu, options Channel, choice Manuelly re-scanning, I need to put info and just let the box to do ?

Regards

[Mickha]

It depends on your image, go into the menu, settings, or setup, look for the tuner configuration/manual scan, enter the details and select the option to replace the current channels.
Always make sure you have a back up, of your channels, and bouquets, using dreamboxedit, or dreamset.

[Nozahic]

It depends on your image, go into the menu, settings, or setup, look for the tuner configuration/manual scan, enter the details and select the option to replace the current channels.
Always make sure you have a back up, of your channels, and bouquets, using dreamboxedit, or dreamset.


Dear Mickha

You will see below in pic what I didn’t still same problem, it look like I scan 11596 , I find BFMBusiness in the list, when I click on , screen black but if I press on info of this channel it s 11595 , it don’t take the channel change.

Any help guys, thank a lot .67882678836788467885

[Mickha]

You need to set the Clear Before Scan option to Yes, but it shouldn't matter whether the frequency is 11595, or 11596.
You might have multiple versions, of the channel, scanned in, check in the All Channels option, when in the channel selection you usually have the option to press the red button, on your remote, to view all channels.

[Nozahic]

678886788967890678916789267893

I did what you ask, I take pic of all stage and still not channel, we still have the issue with 11596 it s scan but we i click on the black screen of BFMBusiness, they say 11595.

I try to press the red button when I had the results but nothing. It is very strange because BFMBusiness stop to work one day , but I still have this channel on a Fransat box downstairs, because I was thinking maybe they stop to be on

Regards

[Mickha]

You need to exit the scan, then bring up your channel list, not the last scanned, but the full channel list, usually done by pressing the up/down arrows, on the centre of your remote.
When you have the full list up you should see options, in Open Black Hole you press the red button, for All channels.

[Nozahic]

You need to exit the scan, then bring up your channel list, not the last scanned, but the full channel list, usually done by pressing the up/down arrows, on the centre of your remote.
When you have the full list up you should see options, in Open Black Hole you press the red button, for All channels.


Dear Mickha
I exit scan, I press up/down near ok button middle of the remote control, I had a list after I press the red button, I have a All channel but I find BFMBusiness but nothing, I don’t have option Open Black Hole

Regards

6789467895

[Mickha]

Have you scrolled down, to the bottom of the page, in your second image?
As you can see, by the white bar, on the right hand side, you have quite few channels.
Since I don't use Openvix, or have a Fransat card, I doubt I can help you any further.

[3tv]

probably using a different unkown aes key. Since a few days ago fransat ultra HD was opening fine in oscam but not now, working fine if I use the ci+ cam though

[Nozahic]

Thank Mickha but no success, never mind if you can’t assist more. I just saw 3TV put a message, I will see if it can help because I think it have the Fransat card.

3TV, thank for reply and I hope you can help me. Don’t forget I am not a pro. I can’t understand it look like Fransat change something since few days, it is maybe for that I lost BFMBusiness tv, I lost only this Chanel few days ago, what I need to do exactly for have back this channel if it is possible. How I used the ci+ cam ?

Best regards

Alain

[Mickha]

CI+ Cam, Common Interface, is the official Fransat cam module.
67896

Your VU+ Duo has two Common Interface slots, that the CI+ Module can slide into.

[Nozahic]

If I buy a CI+ module, it will work straight away or I will need to do more thing because like you know guys I am not so cleaver with that.
Where I can buy a CI+ ? It need to be a special one ?

Regards

[Nozahic]

If I look on **** you have plenty options to buy

https://www.****.co.uk/bhp/ci-module

Don’t know witch one

[3tv]

If I look on **** you have plenty options to buy

https://www.****.co.uk/bhp/ci-module

Don’t know witch one

fransat neotion ci+ cam

[Nozahic]

Dear 3TV, I need to order CI+ with a new card or I can used my card ?
Also if I buy that I will need to do a lot of change on my vu+ box ? Because like you know well I am not so good with the setting of the box.
If you think it will be too complicated, I will keep like that without BFMBusiness on my second TV, because I have all the other channels

Best regards

Alain

[3tv]

Dear 3TV, I need to order CI+ with a new card or I can used my card ?
Also if I buy that I will need to do a lot of change on my vu+ box ? Because like you know well I am not so good with the setting of the box.
If you think it will be too complicated, I will keep like that without BFMBusiness on my second TV, because I have all the other channels

Best regards

Alain

I think its image specific if they support ci+

you only need the cam, you will be limited with what you can do with recordings though when viewing using the ci+

[Nozahic]

Dear 3TV

Thank you for your explanation, I order a new one with the card, we will see when I have
I will need to do some update on my box or it will work fine straight away with all the update I did in the past with you and Mickha

Regards

[Nozahic]

26789967900

I received today the ci+ Fransat with card , I put in slot 1 and put back the tv on but still no BFMBusiness on, I keep the other card in also , I need to move the other card ?
When I go to ci assignment, I can see slot 1 Fransat , if I press green, I have a message for say problem software, the box turn off and start again but no BFMBusiness

I will need help please from you guys

Regards

Alain

[3tv]

26789967900

I received today the ci+ Fransat with card , I put in slot 1 and put back the tv on but still no BFMBusiness on, I keep the other card in also , I need to move the other card ?
When I go to ci assignment, I can see slot 1 Fransat , if I press green, I have a message for say problem software, the box turn off and start again but no BFMBusiness

I will need help please from you guys

Regards

Alain

remove the all cards and see if the fransat ci+ cam and card opens any channels if not ci+ might not be supported by your image or hardware. The vti image supports it

[Nozahic]

If I understand, I need to move my old Fransat card and start again.
I didn’t that after I put back my box on, turn off at the back. No pic
I go to menu, set up, common interface, common interface assignment,
I this point I can see slot 1 Fransat and slot no module found
I press green button for edit
I have a message who come and the box come back to this screen where I wait and this message come on with erreur
I press ok and wait but nothing happens

I would like your help but don’t forget I know so good with that , pass me all the detail please 679016790267903

[3tv]

If I understand, I need to move my old Fransat card and start again.
I didn’t that after I put back my box on, turn off at the back. No pic
I go to menu, set up, common interface, common interface assignment,
I this point I can see slot 1 Fransat and slot no module found
I press green button for edit
I have a message who come and the box come back to this screen where I wait and this message come on with erreur
I press ok and wait but nothing happens

I would like your help but don’t forget I know so good with that , pass me all the detail please 679016790267903

there is a ci+ helper plugin you can install, if that doesn't work you could try installing the vti image. you need to find out if your receiver supports ci+ also.

[Nozahic]

there is a ci+ helper plugin you can install, if that doesn't work you could try installing the vti image. you need to find out if your receiver supports ci+ also.

How I can install ci+ helper plugin ?
Sorry to be stupid but when you say if your receiver support ci+ , what you means ?

For finish you say to install vti image, what I need to do for that.

Because now I just take off the ci+ from my box and I lost all the channel, no more tv , I put back my card only but when I try to manage the soft cam , they don’t stay like before.

[3tv]

if your using an old image on your receiver then that might be a reason it doesn't work, I don't know if the ci+ helper plugin will work for you or not or even if your receiver supports ci+. You need to do homework, google all questions.

[Nozahic]

3TV I look on google and it look like some people have ci+ Fransat with vu+ duo , the thing is now since I put this ci+ in my box , I lost all my channel and I don’t know how to have back. Also I bought this ci+ and ask if it will work . You know since last time I am not so good and cleaver with all this things. Now what I can do for have back mu channel without BFMBusiness and I don’t mind to lose £90 for this ci+ Fransat, I order but will not work in my box.
Regards

[Mickha]

Some images no longer support CI+, I know the developers of Black Hole, and Open Black Hole, have ceased support, possibly due to pressure from some providers.
Which image, and version, are you running?

[Nozahic]

Dear Mickha
I am not sure, how I can find this information because now I lost all my channel since I put ci+ in my vu+ box.

[3tv]

Dear Mickha
I am not sure, how I can find this information because now I lost all my channel since I put ci+ in my vu+ box.

reboot, restart oscam

[Nozahic]

Good evening
I am so sad now because I mess up everything with this ci+ , I lost all my channel and I don’t know what to do. I past the last 3 hours to look everything and can’t see what is it wrong.
I rebooted my box few time and no channel back, if I go to menu, setup, softcam , softcam manager , I can see my Oscam but when I try to activate them , nothing happen and don’t stay in active
Also I look online like 3TV say, for the ci+ Fransat work with a vu+ box, the card need to be paired by tv before to be put in the vu+ box.

For be honest with all this issues, I would like just my box working without BFMBusiness channel and I will send back the ci+ to the seller because again he look far to complicated for me, and if I read what 3TV , I can’t recorded tv program with this ci+.

Regards


6790467905

[Nozahic]

Any help guys because I am looking everywhere and I am lost , I look FileZilla and my Oscam are still here, but I can’t log on Oscam, I can open openwebif but don’t have Oscam.

Please guys help me to just be back like before , I don’t mind to have 1 channel lost if the other work fine and I will send back this bloody ci+ who destroy all my system

Regards

[tigertimtim]

Any help guys because I am looking everywhere and I am lost , I look FileZilla and my Oscam are still here, but I can’t log on Oscam, I can open openwebif but don’t have Oscam.

Please guys help me to just be back like before , I don’t mind to have 1 channel lost if the other work fine and I will send back this bloody ci+ who destroy all my system

Regards

most images have Oscam built into so no need for filezilla....press green button to add plug ins, itll be under softcam , at least on openvix it is presume same for other images ?

[3tv]

Any help guys because I am looking everywhere and I am lost , I look FileZilla and my Oscam are still here, but I can’t log on Oscam, I can open openwebif but don’t have Oscam.

Please guys help me to just be back like before , I don’t mind to have 1 channel lost if the other work fine and I will send back this bloody ci+ who destroy all my system

Regards

adding a ci+ and removing doesn't effect your oscam files they work independently.

[Mickha]

You just have to select which option you're using, usually by pressing the blue button and selecting Common Interface, or Oscam.

[Nozahic]

I manage to have back my channel without BFMBusiness channel, but I will listen the radio
I send back the ci+ Fransat because too complicated for me
Thank all for your help
If someone knew how I can have BFMBusiness back on my card and vu+ duo, I will take advice but not too hard
Regards

Alain

[Nozahic]

Hi guys

I had some power cut at home this weekend and lost my vu+ duo box, I settle with you. Don’t want to go on any more.
I take another of my box, and I read all our past message and resetting this vu+ duo box. But something is wrong, I don’t know what but can’t have the channel of fransat.
I take few pic for you can look, I hope it will be easy this time

Regards 6827868279682806828168282

[3tv]

easiest way is to use atv 6.2 image and ci cam, it now supports ci+ cams by default

[Nozahic]

Dear 3tv
Thanks for your message, but again not sure what I need to do for have what you message me.
I pass all day yesterday to read all the message, I am not too far to settle this box, maybe if I send you few pic you can see straight away my mistake for have fransat

Other way what I need to do with your easy way, like say I don’t mind to pay if you know someone who,can do the box for me

Regards

Alain

[january_king]

I can confirm that OpenATV 6.2 + Fransat CAM works in my Vu Solo2.
It is a good image in any case so worth making the switch if you need to use CI+

[Nozahic]

Ok guys, if I understand now it is more easy to have fransat on vu+
I find this image online, it is the good one ? I need to put back my box to factory setting ? After I downloaded this new image in my box and after I will have fransat .
Last question I have already the card fransat, I just need to buy a ci + cam who can read my card or I need to buy a full fransat ci+ cam68283

[Nozahic]

Good afternoon
I manage to download open atv 6.2 and find my channel. Do you know if with my card I can have fransat ? Maybe need to download a Oscam or do a update? Other way what I need to do for have ci+ fransat card working, just to but a ci+ and pound in, or something to else

Regards

[3tv]

with ci cam it should work without having to do anything.

[Nozahic]

OMG it is amazing, now I put the new image it will work, just order on ******, can’t wait to have. If it is so easy I will do another box like that for recovery, thank for that

Regards

[Nozahic]

Good evening

I received my cI fransat, put in but nothing

I take few pic maybe you will see what it is wrong for help me to deal


Cheers

m6829268293682946829568296

[3tv]

Good evening

I received my cI fransat, put in but nothing

I take few pic maybe you will see what it is wrong for help me to deal


Cheers

m6829268293682946829568296

hi bitrate support needs to be set to yes

[Nozahic]

Good evening

I can see a lot now but still no channel, I have a message who say need ci+ , maybe vu+ duo it is not ci +

Cheers 682976829868299683006830168302683 02683036830468304

[JOE.MADDISON]

have you tried leaving card in cam and on channel for card to update

[Nozahic]

No, I just put channel France 2 on, I manage to do a update of the card
I try to look online, I find that but not sure, my box is a vu+ duo, and you need maybe plugin ciplushelper, I don’t have that , I look inside plugin/ download plugin but can’t find. I find that online enigma 2 plugin systemplugin cipushelper but I don’t know how to install that on my box
Maybe my box is too old and need to buy a new ?
Regards

[3tv]

openatv may have removed ci+ support

google -

enigma2-plugin-systemplugins-ciplus-helper_1.1-r0_all.ipk

then ftp it to your box either into the hdd or tmp folder and install it through your local extensions menu

[Nozahic]

I downloaded your file

After that I find the file on the box, look pic, I downloaded but nothing, I can’t find this file download plugins.

You have 8 options : driver, extension, Picon, .......... system plugin

Not sure where I need to look




68305