oscam ipk file

[Satcat]

I loaded and installed an oscam softcam file, then uninstalled it and deleted it from usr>softcams. I then attempted to install it again but I get the message that I can't because it is still there. Any ideas where it could be so that I can get rid of it and start again.
I searched high and low but can't see it.
Using solo2 - openvix.
Any help appreciated.

[ian]

/var/lib/opkg/info/

Delete the files pertaining to Oscam list and Oscam Control

Reboot then try again.

Or alternatively, send your ipk to /tmp

Then telnet into your box and issue

opkg install -force-overwrite /tmp/*.ipk

(with the * being the exact name of your Oscam ipk)



Ian.

[Satcat]

Thanks Ian, but I can't find any Oscam file in there.
Any other thoughts?

[ian]

If you installed it using an ipk then it should be.

You should find Oscam files starting with enigma2-plugin-extensions-oscam(yourversion).control and .list

Its these files telling Enigma2 that the version you are trying to install again is already installed and up to date. In effect they're lying to Enigma2 because you deleted manually using FTP

Another option is to simply extract your ipk using 7zip and then extract the zipped data file and then just send the Oscam binary to /usr/bin and chmod to 755, restart Enigma2 and Oscam will be installed again.

Ian.

[Satcat]

I have looked through all the enigma2 files and I can't see any reference to oscam.
The file I downloaded was described as an ipk file although it finishes with .rar
I have tried removing it by telnet with no success.
I have installed a earlier version from plugins, which will do for now, but would like to get rid of the downloaded one.
I am now getting error messages popping up on the screen every 2-3 mins
I think a fresh flash might be the answer, unless you have any more ideas how to get rid of it,

[ian]

Nope. One or all of the above methods should work.

If not you probably tried to install a corrupted ipk, and best to flash a backup.

Ian.

[Mickha]

.rar is a compressed file, it might contain a .ipk file but until you uncompress it you don't know.
Equally you state you loaded an Oscam softcam file, how did you load it?
Oscam usually refers to an emulator, whereas softcam I usually associate with keys.

Can you please post the name of the file, and where you found it, if on satpimps please post a link.

[Satcat]

This is the file I am referring to:
oscampowervu-mips_OpenVix-11433_all.rar
It wasn't from this site

[Mickha]

First you need to uncompress the file, using Winrar, winzip or the free 7-zip, to see if it contains a .ipk file, which can be loaded using the manual install of ipk files option, in your receivers menu, or contains files you transfer, to your current Oscam configuration, using Filezilla, or other FTP program, and overwrite the current oscam files.

[butchyboy]

just installed oscam.ipk on my vu+duo and channels not opening on 4.8e,are the latest keys in the ipk which was released today.am using blackhole image.
any help please

[kegnkiwi]

just installed oscam.ipk on my vu+duo and channels not opening on 4.8e,are the latest keys in the ipk which was released today.am using blackhole image.
any help please

Do you mean the horse channels? If so with the latest oscam and the configs in the afn thread they auto updated for me. I have not had time to try the channels on 0.8w

[butchyboy]

Do you mean the horse channels? If so with the latest oscam and the configs in the afn thread they auto updated for me. I have not had time to try the channels on 0.8w

can you help me on the configs part,cause im not sure what to do.

[kegnkiwi]

butchyboy you need to install the latest oscam because that has the latest information needed to decrypt the the channels. after you have installed the new file you then need to send the juneautoroll configs to var/tuxbox/config on your box. Next turn on the latest oscam you have just installed and you then need to turn to one of the sis channels and leave the channel on for a few minutes for the keys to auto update.

[butchyboy]

butchyboy you need to install the latest oscam because that has the latest information needed to decrypt the the channels. after you have installed the new file you then need to send the juneautoroll configs to var/tuxbox/config on your box. Next turn on the latest oscam you have just installed and you then need to turn to one of the sis channels and leave the channel on for a few minutes for the keys to auto update.

have you a link to the latest oscam i need?.have vu+duo and blackhole image

[Satcat]

Kegnkiwi posted it here: https://www.satpimps.co.uk/showthread.php?175436-9E-Powervu&p=978104&viewfull=1#post978104

[kegnkiwi]

butchyboy is that an original or a duo 2? Hopefully its a duo 2.

[butchyboy]

butchyboy is that an original or a duo 2? Hopefully its a duo 2.

original duo its the first one out over 10 years ago,will it be ok to open powervu ?.

[kegnkiwi]

I don't think is powerfull enough. They only just released it with out stream relay some months ago on e2 boxes. I have not read anywhere that it works on original duo but it would be nice to be proved wrong.

[butchyboy]

I don't think is powerfull enough. They only just released it with out stream relay some months ago on e2 boxes. I have not read anywhere that it works on original duo but it would be nice to be proved wrong.

:confused: :confused:

[kegnkiwi]

Up until earlier this year powervu channels where not available to view without doing a lot of messing around. It involved using something called stream relay and you needed a special channel list a bit like iptv. I was only some months later that they got rid of the need to use stream relay and the reason it took so long was because they said the boxes were not powerfull enough to run the new encryption. This is why i don't think older boxes can run it.

[butchyboy]

I don't think is powerfull enough. They only just released it with out stream relay some months ago on e2 boxes. I have not read anywhere that it works on original duo but it would be nice to be proved wrong.

1,m going to try it and see will it work kegnkiwi

[kegnkiwi]

cool i just checked and openatv are still supporting your box. do you have a recent image on your box? i would try with a very recent image.

[butchyboy]

blackhole 3.0.2.H i,ve just installed both files and have it left onbetfred channel to see will it auto update

[butchyboy]

still a blank screen here :(

[kegnkiwi]

Never tried the befredchannel but it did update on the sis uk channels.

[butchyboy]

ive it left on the sis channels nothing happening yet.............................. .....

[kegnkiwi]

Have you checked whats going on it oscam. If you put your boxes ip address into your computers browser and add :8888 does in let you into the oscam webif, you can see what port its using if it does not open by checking it in your oscam.config file that you sent to var/tuxbox/config

[butchyboy]

will check now m8

[butchyboy]

Have you checked whats going on it oscam. If you put your boxes ip address into your computers browser and add :8888 does in let you into the oscam webif, you can see what port its using if it does not open by checking it in your oscam.config file that you sent to var/tuxbox/config

no it won,t let me in when i add the :8888 to the end of the boxs ip address.
but it will let me in if i just use the boxs ip address without the :8888

[Mickha]

When in Openwebif just click on Oscam Webinterface, on the left hand side, under Extras.

[kegnkiwi]

Thats your boxes web if and nothing to do with oscam. You need to make sure oscam is running and the way you do that is by doing as above and adding :8888 or 8181 of 7171 what ever is in the config files you sent to your box. This is how to tell for sure oscam is running.

[butchyboy]

#### "********************************* **********"
#### "* ..:: A U T H O R ::.. *"
#### "* << Audi06_19 **** *"
#### "* ..:: https://dreamosat-forum.com ::.. *"
#### "********************************* **********"

[global]
logfile = /tmp/oscam.log
#logfile = stdout
nice = -1
preferlocalcards = 1
block_same_ip = 0
block_same_name = 0

[cache]

[streamrelay]
stream_relay_enabled = 0

[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
delayer = 60
ecminfo_type = 1
user = dvbapiau
read_sdt = 1
write_sdt_prov = 1
extended_cw_api = 1
boxtype = dreambox

[webif]
httpport = 8888
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255

[kegnkiwi]

When in Openwebif just click on Oscam Webinterface, on the left hand side, under Extras.

ha ha I did not know you could do that. I learn something new every day. :)

[echelon]

make sure that the oscam bin file is chmod to 755

make sure that oscam is selected and started as the emu

but the box ip address :8888 into the web browser to see the oscam interface

[kegnkiwi]

Your config is showing your port should be 8888 so try what mickha has said and see if you can get into the oscam webif.

[butchyboy]

Your config is showing your port should be 8888 so try what mickha has said and see if you can get into the oscam webif.

opened webif and oscam is not there under extra,s

[butchyboy]

make sure that the oscam bin file is chmod to 755

make sure that oscam is selected and started as the emu

but the box ip address :8888 into the web browser to see the oscam interface

where do i ifind oscam bin file and where do i select oscam and start as emu ?
i have tried putting the box ip addy with the :8888 at the end of the box ip but it will not open

[butchyboy]

Your config is showing your port should be 8888 so try what mickha has said and see if you can get into the oscam webif.

no joy m8

[echelon]

where do i ifind oscam bin file and where do i select oscam and start as emu ?
i have tried putting the box ip addy with the :8888 at the end of the box ip but it will not open

depends on the image in use

I am using BH and not getting very far with this powervu version

in BH , use BLUE and select oscam and start it

if you havent selected it and started it, it wont be running, hence your problems

the oscam file, if installed , is in var/bin in BH

[butchyboy]

blackhole 3.0.2.H image.

i,ve already started the oscam via blue button.

still cannot get in to box with ip addy and :8888 at the end of box ip

[echelon]

did you try ENIGMA2 RESTART from the SHUTDOWN MENU first ?

or a complete shutdown and reboot (restart) ??

[butchyboy]

did you try ENIGMA2 RESTART from the SHUTDOWN MENU first ?

or a complete shutdown and reboot (restart) ??

i did yes echelon done both.

[Mickha]

Have you clicked on the arrow, on the left hand side, in openwebif?
68085

68086

[echelon]

maybe try overwriting the oscam bin file with a slightly older one, chmod it to 755 , reboot, then try the oscam webif

if it works on an older oscam like 11431 or whatever, then maybe the latest one has problems ?

I know my solo2 keeps freezing and I lose the webif in the newest ones

the config files may also play a part too

[butchyboy]

Have you clicked on the arrow, on the left hand side, in openwebif?
68085

68086

yes oscam is not in mine.

[butchyboy]

maybe try overwriting the oscam bin file with a slightly older one, chmod it to 755 , reboot, then try the oscam webif

if it works on an older oscam like 11431 or whatever, then maybe the latest one has problems ?

I know my solo2 keeps freezing and I lose the webif in the newest ones

the config files may also play a part too

not sure how to go about chmod to 755 ?

[butchyboy]

hey guys good news i can get in to oscam now with my box ip addy and :8888 at the end of box ip.
so i,m in what do i do now please?.

[butchyboy]

Hide/Reset Reader/User AU Address Port Protocol SRVID:CAID@PROVID Last Channel LB Value/Reader Online & Idle* Status
Server 2/2
Hide root OFF 127.0.0.1 0 server 0000:0000@000000 00:15:39
00:15:39 OK
Hide root OFF 127.0.0.1 0 http 0000:0000@000000 00:15:39
00:07:21 OK
Readers 3/3 (2 of 3 CARDOK)
Hide Restart emulator ACTIVE 127.0.0.1 0 emu 0099:0E00@000000 SIS UK with BTC and 2DB [MEDIA BROADCAST] no data 00:15:39
00:00:01 CARDOK
(1100 entitlements)
Hide Restart AFN ACTIVE 127.0.0.1 0 emu 0000:0000@000000 no data 00:15:39
00:15:39 CARDOK
(1100 entitlements)
Hide Restart Card_reader_1 ON 127.0.0.1 0 internal 0000:0000@000000 no data 00:15:39
00:15:39 OFF
(no entitlements)
Proxies 2/2 (1 of 2 online)
Hide Restart constant.cw ON 0.0.0.0 0 constcw 0000:0000@000000 no data 00:15:39
00:15:39 CONNECTED
Hide Restart cccam-1 ON 0.0.0.0 0 0000:0000@000000 no data 00:15:39
00:15:39 OFF
Clients 1/1
Hide Kill dvbapiau ACTIVE 0.0.0.0 0 dvbapi 0099:0E00@000000 SIS UK with BTC and 2DB [MEDIA BROADCAST] emulator (17 ms) 00:15:36
364d 23:59:59 OK

getting all the above in oscam status

[Mickha]

not sure how to go about chmod to 755 ?
It's not as difficult as it sounds.
You just right click on the file, or folder, you want to change, then click on the File Permission, or File Attribute, option, and change the numeric value to 755, and click OK.
If the file is already on your receiver, you need to use Filezilla, or other FTP program, to access it and change it.

[kegnkiwi]

I'm not exactly sure what everything in your log files means altough from what I can see it does not have the correct keys to decrypt the channel. In the log below it shows the moment oscam writes the keys to the softcam and then my channels open. You need the softcam to update like this. After it gets the keys you can see the log changes and if shows it has the keys. This is how i know if i am usually get a glitch free viewing.

2018/10/20 07:01:03 76355B55 r (emu) Writing key file: /etc/tuxbox/config/SoftCam.Key
2018/10/20 07:01:03 76355B55 r (emu) Key written: P 90087 01 62AE48734B673A
2018/10/20 07:01:03 76355B55 r (emu) Writing key file: /etc/tuxbox/config/SoftCam.Key
2018/10/20 07:01:03 76355B55 r (emu) Key written: P 90088 01 62AE48734B673A
2018/10/20 07:01:03 76355B55 r (emu) Writing key file: /etc/tuxbox/config/SoftCam.Key
2018/10/20 07:01:03 76355B55 r (emu) Key written: P 90089 01 62AE48734B673A
2018/10/20 07:01:03 76355B55 r (emu) Writing key file: /etc/tuxbox/config/SoftCam.Key
2018/10/20 07:01:03 76355B55 r (emu) Key written: P 9008A 01 62AE48734B673A
2018/10/20 07:01:03 76355B55 r (emu) Writing key file: /etc/tuxbox/config/SoftCam.Key
2018/10/20 07:01:03 76355B55 r (emu) Key written: P 9008B 01 62AE48734B673A
2018/10/20 07:01:03 76355B55 r (emu) Writing key file: /etc/tuxbox/config/SoftCam.Key
2018/10/20 07:01:03 76355B55 r (emu) Key written: P 9008C 01 62AE48734B673A
2018/10/20 07:01:03 76355B55 r (emu) Writing key file: /etc/tuxbox/config/SoftCam.Key
2018/10/20 07:01:03 76355B55 r (emu) Key written: P 9008D 01 62AE48734B673A
2018/10/20 07:01:03 76355B55 r (emu) Writing key file: /etc/tuxbox/config/SoftCam.Key
2018/10/20 07:01:03 76355B55 r (emu) Key written: P 9008E 01 62AE48734B673A
2018/10/20 07:01:03 76355B55 r (emu) Writing key file: /etc/tuxbox/config/SoftCam.Key
2018/10/20 07:01:03 76355B55 r (emu) Key written: P 9008F 01 62AE48734B673A
2018/10/20 07:01:03 76355B55 r (emu) Writing key file: /etc/tuxbox/config/SoftCam.Key
2018/10/20 07:01:03 76355B55 r (emu) Key written: P 90090 01 62AE48734B673A
2018/10/20 07:01:03 76355B55 r (emu) Writing key file: /etc/tuxbox/config/SoftCam.Key
2018/10/20 07:01:03 76355B55 r (emu) Key written: P 90091 01 62AE48734B673A
2018/10/20 07:01:03 76355B55 r (emu) Writing key file: /etc/tuxbox/config/SoftCam.Key
2018/10/20 07:01:03 76355B55 r (emu) Key written: P 90092 01 62AE48734B673A
2018/10/20 07:01:03 76355B55 r (emu) Writing key file: /etc/tuxbox/config/SoftCam.Key
2018/10/20 07:01:03 76355B55 r (emu) Key written: P 90094 01 62AE48734B673A
2018/10/20 07:01:03 76355B55 r (emu) Key found in EMM: P 0009**** 01 62AE48734B673A ; UA: 003E7E84
2018/10/20 07:01:03 0D845053 r (emu) Key written: P 9006D 01 62AE48734B673A
2018/10/20 07:01:03 0D845053 r (emu) Key found in EMM: P 0009**** 01 62AE48734B673A ; UA: 003E7E84
2018/10/20 07:01:03 76355B55 r (reader) AFN [emu] dvbapiau emmtype=unique, len=155 (hex: 0x9B), cnt=1: written (17 ms)
2018/10/20 07:01:03 76355B55 r (reader) AFN [emu] dvbapiau emmtype=unique, len=101 (hex: 0x65), cnt=1: error (0 ms)
2018/10/20 07:01:03 0D845053 r (reader) emulator [emu] dvbapiau emmtype=unique, len=155 (hex: 0x9B), cnt=1: written (18 ms)
2018/10/20 07:01:03 0D845053 r (reader) emulator [emu] dvbapiau emmtype=unique, len=101 (hex: 0x65), cnt=1: error (0 ms)
2018/10/20 07:01:08 66B4E6CA c (ecm) dvbapiau (0E00@000000/0000/006D/99:2DFBD0C7B8425CA4C7C5A4CDA6BDCD 32): cache3 (11 ms) by AFN (C/1/2/2) - AFN
2018/10/20 07:01:09 66B4E6CA c (ecm) dvbapiau (0E00@000000/0000/006D/99:EAE635D5FDE4A25A858D91C2A90952 5B): cache3 (2 ms) by AFN (C/1/2/2) - AFN
2018/10/20 07:01:18 66B4E6CA c (ecm) dvbapiau (0E00@000000/0000/006D/99:57138B2CA02119DA048B9CFA0E1C6A B0): cache3 (11 ms) by AFN (C/1/2/2) - AFN
2018/10/20 07:01:28 66B4E6CA c (ecm) dvbapiau (0E00@000000/0000/006D/99:A477AA52C3AC08CAF80B9E7199FB06 9E): cache3 (10 ms) by AFN (C/1/2/2) - AFN
2018/10/20 07:01:38 66B4E6CA c (ecm) dvbapiau (0E00@000000/0000/006D/99:692BC425D9B3117BCC06B457165072 50): cache3 (6 ms) by AFN (C/1/2/2) - AFN
2018/10/20 07:01:48 66B4E6CA c (ecm) dvbapiau (0E00@000000/0000/006D/99:7F1CD81ACB0BBAE54331BD97FE9DBD 62): cache3 (3 ms) by AFN (C/1/2/2) - AFN
2018/10/20 07:01:58 66B4E6CA c (ecm) dvbapiau (0E00@000000/0000/006D/99:2C4209C9353C2E9AD2F18CEDD139E8 DB): cache3 (8 ms) by AFN (C/1/2/2) - AFN
2018/10/20 07:02:08 66B4E6CA c (ecm) dvbapiau (0E00@000000/0000/006D/99:6E268F3241D898C349561AB73D0160 E4): cache3 (2 ms) by AFN (C/1/2/2) - AFN
2018/10/20 07:02:18 66B4E6CA c (ecm) dvbapiau (0E00@000000/0000/006D/99:B9CF431D136665DE1B2B6F77A39C5E C1): cache3 (9 ms) by AFN (C/1/2/2) - AFN
2018/10/20 07:02:28 66B4E6CA c (ecm) dvbapiau (0E00@000000/0000/006D/99:3F9AFA5D211ACE2B32C0FCF20B1CC6 EE): cache3 (7 ms) by AFN (C/1/2/2) - AFN
2018/10/20 07:02:38 66B4E6CA c (ecm) dvbapiau (0E00@000000/0000/006D/99:4398F205030FB5533F070BCBEBC1FD CD): cache3 (10 ms) by AFN (C/1/2/2) - AFN
2018/10/20 07:02:48 66B4E6CA c (ecm) dvbapiau (0E00@000000/0000/006D/99:ED90E1AF380DAC3B95C65228CB35AA 37): cache3 (5 ms) by AFN (C/1/2/2) - AFN
2018/10/20 07:02:48 00000000 **** OSCam << cardserver log switched, version 1.20_svn, build r11434 (arm-linux-gnueabihf)
2018/10/20 07:02:58 66B4E6CA c (ecm) dvbapiau (0E00@000000/0000/006D/99:90419001942DB64CCE8DA02C1282CC 6C): cache3 (9 ms) by AFN (C/1/2/2) - AFN

[Wow]

Now this sound really interesting wow Oscar new version 17 and 18 needed for the Asian channels but not anto update I’ll have to have a go when my box comes from lees u guys after afn etc been reading a lot on the net about power chanels look really interesting indeed

[butchyboy]

I'm not exactly sure what everything in your log files means altough from what I can see it does not have the correct keys to decrypt the channel. In the log below it shows the moment oscam writes the keys to the softcam and then my channels open. You need the softcam to update like this. After it gets the keys you can see the log changes and if shows it has the keys. This is how i know if i am usually get a glitch free viewing.

2018/10/20 07:01:03 76355B55 r (emu) Writing key file: /etc/tuxbox/config/SoftCam.Key
2018/10/20 07:01:03 76355B55 r (emu) Key written: P 90087 01 62AE48734B673A
2018/10/20 07:01:03 76355B55 r (emu) Writing key file: /etc/tuxbox/config/SoftCam.Key
2018/10/20 07:01:03 76355B55 r (emu) Key written: P 90088 01 62AE48734B673A
2018/10/20 07:01:03 76355B55 r (emu) Writing key file: /etc/tuxbox/config/SoftCam.Key
2018/10/20 07:01:03 76355B55 r (emu) Key written: P 90089 01 62AE48734B673A
2018/10/20 07:01:03 76355B55 r (emu) Writing key file: /etc/tuxbox/config/SoftCam.Key
2018/10/20 07:01:03 76355B55 r (emu) Key written: P 9008A 01 62AE48734B673A
2018/10/20 07:01:03 76355B55 r (emu) Writing key file: /etc/tuxbox/config/SoftCam.Key
2018/10/20 07:01:03 76355B55 r (emu) Key written: P 9008B 01 62AE48734B673A
2018/10/20 07:01:03 76355B55 r (emu) Writing key file: /etc/tuxbox/config/SoftCam.Key
2018/10/20 07:01:03 76355B55 r (emu) Key written: P 9008C 01 62AE48734B673A
2018/10/20 07:01:03 76355B55 r (emu) Writing key file: /etc/tuxbox/config/SoftCam.Key
2018/10/20 07:01:03 76355B55 r (emu) Key written: P 9008D 01 62AE48734B673A
2018/10/20 07:01:03 76355B55 r (emu) Writing key file: /etc/tuxbox/config/SoftCam.Key
2018/10/20 07:01:03 76355B55 r (emu) Key written: P 9008E 01 62AE48734B673A
2018/10/20 07:01:03 76355B55 r (emu) Writing key file: /etc/tuxbox/config/SoftCam.Key
2018/10/20 07:01:03 76355B55 r (emu) Key written: P 9008F 01 62AE48734B673A
2018/10/20 07:01:03 76355B55 r (emu) Writing key file: /etc/tuxbox/config/SoftCam.Key
2018/10/20 07:01:03 76355B55 r (emu) Key written: P 90090 01 62AE48734B673A
2018/10/20 07:01:03 76355B55 r (emu) Writing key file: /etc/tuxbox/config/SoftCam.Key
2018/10/20 07:01:03 76355B55 r (emu) Key written: P 90091 01 62AE48734B673A
2018/10/20 07:01:03 76355B55 r (emu) Writing key file: /etc/tuxbox/config/SoftCam.Key
2018/10/20 07:01:03 76355B55 r (emu) Key written: P 90092 01 62AE48734B673A
2018/10/20 07:01:03 76355B55 r (emu) Writing key file: /etc/tuxbox/config/SoftCam.Key
2018/10/20 07:01:03 76355B55 r (emu) Key written: P 90094 01 62AE48734B673A
2018/10/20 07:01:03 76355B55 r (emu) Key found in EMM: P 0009**** 01 62AE48734B673A ; UA: 003E7E84
2018/10/20 07:01:03 0D845053 r (emu) Key written: P 9006D 01 62AE48734B673A
2018/10/20 07:01:03 0D845053 r (emu) Key found in EMM: P 0009**** 01 62AE48734B673A ; UA: 003E7E84
2018/10/20 07:01:03 76355B55 r (reader) AFN [emu] dvbapiau emmtype=unique, len=155 (hex: 0x9B), cnt=1: written (17 ms)
2018/10/20 07:01:03 76355B55 r (reader) AFN [emu] dvbapiau emmtype=unique, len=101 (hex: 0x65), cnt=1: error (0 ms)
2018/10/20 07:01:03 0D845053 r (reader) emulator [emu] dvbapiau emmtype=unique, len=155 (hex: 0x9B), cnt=1: written (18 ms)
2018/10/20 07:01:03 0D845053 r (reader) emulator [emu] dvbapiau emmtype=unique, len=101 (hex: 0x65), cnt=1: error (0 ms)
2018/10/20 07:01:08 66B4E6CA c (ecm) dvbapiau (0E00@000000/0000/006D/99:2DFBD0C7B8425CA4C7C5A4CDA6BDCD 32): cache3 (11 ms) by AFN (C/1/2/2) - AFN
2018/10/20 07:01:09 66B4E6CA c (ecm) dvbapiau (0E00@000000/0000/006D/99:EAE635D5FDE4A25A858D91C2A90952 5B): cache3 (2 ms) by AFN (C/1/2/2) - AFN
2018/10/20 07:01:18 66B4E6CA c (ecm) dvbapiau (0E00@000000/0000/006D/99:57138B2CA02119DA048B9CFA0E1C6A B0): cache3 (11 ms) by AFN (C/1/2/2) - AFN
2018/10/20 07:01:28 66B4E6CA c (ecm) dvbapiau (0E00@000000/0000/006D/99:A477AA52C3AC08CAF80B9E7199FB06 9E): cache3 (10 ms) by AFN (C/1/2/2) - AFN
2018/10/20 07:01:38 66B4E6CA c (ecm) dvbapiau (0E00@000000/0000/006D/99:692BC425D9B3117BCC06B457165072 50): cache3 (6 ms) by AFN (C/1/2/2) - AFN
2018/10/20 07:01:48 66B4E6CA c (ecm) dvbapiau (0E00@000000/0000/006D/99:7F1CD81ACB0BBAE54331BD97FE9DBD 62): cache3 (3 ms) by AFN (C/1/2/2) - AFN
2018/10/20 07:01:58 66B4E6CA c (ecm) dvbapiau (0E00@000000/0000/006D/99:2C4209C9353C2E9AD2F18CEDD139E8 DB): cache3 (8 ms) by AFN (C/1/2/2) - AFN
2018/10/20 07:02:08 66B4E6CA c (ecm) dvbapiau (0E00@000000/0000/006D/99:6E268F3241D898C349561AB73D0160 E4): cache3 (2 ms) by AFN (C/1/2/2) - AFN
2018/10/20 07:02:18 66B4E6CA c (ecm) dvbapiau (0E00@000000/0000/006D/99:B9CF431D136665DE1B2B6F77A39C5E C1): cache3 (9 ms) by AFN (C/1/2/2) - AFN
2018/10/20 07:02:28 66B4E6CA c (ecm) dvbapiau (0E00@000000/0000/006D/99:3F9AFA5D211ACE2B32C0FCF20B1CC6 EE): cache3 (7 ms) by AFN (C/1/2/2) - AFN
2018/10/20 07:02:38 66B4E6CA c (ecm) dvbapiau (0E00@000000/0000/006D/99:4398F205030FB5533F070BCBEBC1FD CD): cache3 (10 ms) by AFN (C/1/2/2) - AFN
2018/10/20 07:02:48 66B4E6CA c (ecm) dvbapiau (0E00@000000/0000/006D/99:ED90E1AF380DAC3B95C65228CB35AA 37): cache3 (5 ms) by AFN (C/1/2/2) - AFN
2018/10/20 07:02:48 00000000 **** OSCam << cardserver log switched, version 1.20_svn, build r11434 (arm-linux-gnueabihf)
2018/10/20 07:02:58 66B4E6CA c (ecm) dvbapiau (0E00@000000/0000/006D/99:90419001942DB64CCE8DA02C1282CC 6C): cache3 (9 ms) by AFN (C/1/2/2) - AFN

how do i get the softcam to update like yours ?.

[butchyboy]

It's not as difficult as it sounds.
You just right click on the file, or folder, you want to change, then click on the File Permission, or File Attribute, option, and change the numeric value to 755, and click OK.
If the file is already on your receiver, you need to use Filezilla, or other FTP program, to access it and change it.

yes but which file or folders do i change ?.

[butchyboy]

It's not as difficult as it sounds.
You just right click on the file, or folder, you want to change, then click on the File Permission, or File Attribute, option, and change the numeric value to 755, and click OK.
If the file is already on your receiver, you need to use Filezilla, or other FTP program, to access it and change it.

hi just went in to dcc and checked the files in etc/tuxbox/config and there was 15 files in there and 14 of them were 775 and one file was 644 so changed it to 775,but still no joy with clearing sis channels.
oscam.services.bak was the file i changed to 775

[Mickha]

Not 775 but 755.

[butchyboy]

Not 775 but 755.

so change the 15 files to 755 ye ?

[butchyboy]

just changed them all to 755 and have it left on sis see will it auto update in few mins.

[butchyboy]

still no joy here with trying to open the sis channels,so i don,t know where to go from here :(

[Satcat]

It;s just the oscam bin file that needs to be 755. The config files stay at 644.
It took about 30 mins yesterday evening for mine to auto update for the first time.

[butchyboy]

It;s just the oscam bin file that needs to be 755. The config files stay at 644.
It took about 30 mins yesterday evening for mine to auto update for the first time.

i do not see oscam bin file in my config files

[Satcat]

The oscam bin file is the oscam emu file it's not one of the config file. If it was sent to tmp and then installed it should already be 755. It will be in either usr>bin or usr>softcams depending which image you are using.

[butchyboy]

my box is vu+duo (original one that first came out years ago) and using blackhole 3.0.2.H

loaded the oscampowervu_mips-blackhole-11434 and installed in box,then i added the powervuAutoRollokjune file on box.so the are the 2 files i have installed on the box.

[butchyboy]

The oscam bin file is the oscam emu file it's not one of the config file. If it was sent to tmp and then installed it should already be 755. It will be in either usr>bin or usr>softcams depending which image you are using.

in usr/bin i have found oscamPowervu.mips and it is 775 attribute,should i change it to 755 ?.

[kegnkiwi]

Well i can see an issue you may have. You may have a conflict of files in your config file. Basically files getting confused with other files with the same name. I do not know how you are set up but if you are trying to clear the sis channels or afn I would maybe get rid of all those files in your config folder and then resend the junepowerview ok files so they are the only ones in the folder. It is up to you i dont know what other files are sat in that folder and you could delete your server line if you use oscam for c/s. Other option is create a back up folder on your pc and copy all the files from within your config folder across to the back up.

On another note if could simply be your box is too old to run powervu but i dont know. My older technomate box has blown the power supply so i cannot test on an older box.

[kegnkiwi]

in usr/bin i have found oscamPowervu.mips and it is 775 attribute,should i change it to 755 ?.

You already have oscam working you do not need to change it.

[butchyboy]

Well i can see an issue you may have. You may have a conflict of files in your config file. Basically files getting confused with other files with the same name. I do not know how you are set up but if you are trying to clear the sis channels or afn I would maybe get rid of all those files in your config folder and then resend the junepowerview ok files so they are the only ones in the folder. It is up to you i dont know what other files are sat in that folder and you could delete your server line if you use oscam for c/s. Other option is create a back up folder on your pc and copy all the files from within your config folder across to the back up.

On another note if could simply be your box is too old to run powervu but i dont know. My older technomate box has blown the power supply so i cannot test on an older box.

no i don,t have cs so wont matter reinstalling.i will delete the june autoroll and reinstall.

[butchyboy]

just resent the junePowervu ok files to the box via ftp to var/tuxbox/ and i have 11 files in my config which are all atrributed to 644

[butchyboy]

Well i can see an issue you may have. You may have a conflict of files in your config file. Basically files getting confused with other files with the same name. I do not know how you are set up but if you are trying to clear the sis channels or afn I would maybe get rid of all those files in your config folder and then resend the junepowerview ok files so they are the only ones in the folder. It is up to you i dont know what other files are sat in that folder and you could delete your server line if you use oscam for c/s. Other option is create a back up folder on your pc and copy all the files from within your config folder across to the back up.

On another note if could simply be your box is too old to run powervu but i dont know. My older technomate box has blown the power supply so i cannot test on an older box.

how many files do you have in your config ?.

[kegnkiwi]

That is correct there are 11 files in the config you do not need to change any attirbutes in the configs. Make sure oscam is running by checking via the webif and leave it on one of the channels. I left it on sis uk to update and it took about 5 mins. You can see what is happening in the live log. If you get the updates it should like the log i posted earlier.

[butchyboy]

2018/10/20 21:15:55 14E21F04 p (cccam) cccam-1 configuration error!
2018/10/20 21:15:55 047E1C53 c (ecm) dvbapiau (0E00@000000/0000/0098/40:7F60F2FCDCB5347E25A87EFE8E4DE2 28): rejected (16 ms) by cccam-1 (F/2/2/2) - SIS UK with 2DB
2018/10/20 21:15:55 655D10E1 r (emu) Key not found: P 0098 00
2018/10/20 21:15:55 655D10E1 r (emu) ECM failed: Key not found
2018/10/20 21:15:55 14E21F04 p (cccam) cccam-1 configuration error!
2018/10/20 21:15:55 047E1C53 c (ecm) dvbapiau (0E00@000000/0000/0098/40:D1DAEE354E0DB31FAA8DD1389449AA E9): rejected (19 ms) by cccam-1 (F/2/2/2) - SIS UK with 2DB
2018/10/20 21:15:55 047E1C53 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 0 disabled ecmpids!
2018/10/20 21:15:55 047E1C53 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 1808 ANY CHID PMTPID 1420 VPID 0064
2018/10/20 21:15:56 655D10E1 r (emu) Key not found: P 0098 00
2018/10/20 21:15:56 655D10E1 r (emu) ECM failed: Key not found
2018/10/20 21:15:56 14E21F04 p (cccam) cccam-1 configuration error!
2018/10/20 21:15:56 047E1C53 c (ecm) dvbapiau (0E00@000000/0000/0098/40:E1DD410094C39C3442A42B5EF7CFE8 16): rejected (17 ms) by cccam-1 (F/2/2/2) - SIS UK with 2DB
2018/10/20 21:15:57 655D10E1 r (emu) Key not found: P 0098 00
2018/10/20 21:15:57 655D10E1 r (emu) ECM failed: Key not found
2018/10/20 21:15:57 14E21F04 p (cccam) cccam-1 configuration error!
2018/10/20 21:15:57 047E1C53 c (ecm) dvbapiau (0E00@000000/0000/0098/40:A005C5ED40CCFC6148742918A2EAEC 2D): rejected (18 ms) by cccam-1 (F/2/2/2) - SIS UK with 2DB
2018/10/20 21:15:57 047E1C53 c (dvbapi) Demuxer 0 restarting decodingrequests after 1 ms with 1 enabled and 0 disabled ecmpids!
2018/10/20 21:15:57 047E1C53 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 1808 ANY CHID PMTPID 1420 VPID 0064
2018/10/20 21:15:58 655D10E1 r (emu) Key not found: P 0098 00
2018/10/20 21:15:58 655D10E1 r (emu) ECM failed: Key not found
2018/10/20 21:15:58 14E21F04 p (cccam) cccam-1 configuration error!
2018/10/20 21:15:58 047E1C53 c (ecm) dvbapiau (0E00@000000/0000/0098/40:D1268CB0C89E204300F37E4B6A77F3 64): rejected (17 ms) by cccam-1 (F/2/2/2) - SIS UK with 2DB
2018/10/20 21:15:58 655D10E1 r (emu) Key not found: P 0098 00
2018/10/20 21:15:58 655D10E1 r (emu) ECM failed: Key not found
2018/10/20 21:15:58 14E21F04 p (cccam) cccam-1 configuration error!
2018/10/20 21:15:58 047E1C53 c (ecm) dvbapiau (0E00@000000/0000/0098/40:D9B55B017C0FC4CE4247CBA6AB0E3A AE): rejected (17 ms) by cccam-1 (F/2/2/2) - SIS UK with 2DB
2018/10/20 21:15:58 047E1C53 c (dvbapi) Demuxer 0 restarting decodingrequests after 1 ms with 1 enabled and 0 disabled ecmpids!
2018/10/20 21:15:58 047E1C53 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 1808 ANY CHID PMTPID 1420 VPID 0064
2018/10/20 21:15:59 655D10E1 r (emu) Key not found: P 0098 00
2018/10/20 21:15:59 655D10E1 r (emu) ECM failed: Key not found
2018/10/20 21:15:59 14E21F04 p (cccam) cccam-1 configuration error!
2018/10/20 21:15:59 047E1C53 c (ecm) dvbapiau (0E00@000000/0000/0098/40:F2C288ECAFC1E5C6582897A0E01CF0 66): rejected (18 ms) by cccam-1 (F/2/2/2) - SIS UK with 2DB
2018/10/20 21:16:00 655D10E1 r (emu) Key not found: P 0098 00
2018/10/20 21:16:00 655D10E1 r (emu) ECM failed: Key not found
2018/10/20 21:16:00 14E21F04 p (cccam) cccam-1 configuration error!
2018/10/20 21:16:00 047E1C53 c (ecm) dvbapiau (0E00@000000/0000/0098/40:1624CF8906EE7086F7B0F56D35E33D E9): rejected (16 ms) by cccam-1 (F/2/2/2) - SIS UK with 2DB
2018/10/20 21:16:00 047E1C53 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 0 disabled ecmpids!
2018/10/20 21:16:00 047E1C53 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 1808 ANY CHID PMTPID 1420 VPID 0064
2018/10/20 21:16:01 655D10E1 r (emu) Key not found: P 0098 00
2018/10/20 21:16:01 655D10E1 r (emu) ECM failed: Key not found
2018/10/20 21:16:01 14E21F04 p (cccam) cccam-1 configuration error!
2018/10/20 21:16:01 047E1C53 c (ecm) dvbapiau (0E00@000000/0000/0098/40:8402EB639C40D46E7660E09A99289E C8): rejected (16 ms) by cccam-1 (F/2/2/2) - SIS UK with 2DB
2018/10/20 21:16:02 655D10E1 r (emu) Key not found: P 0098 00
2018/10/20 21:16:02 655D10E1 r (emu) ECM failed: Key not found
2018/10/20 21:16:02 14E21F04 p (cccam) cccam-1 configuration error!
2018/10/20 21:16:02 047E1C53 c (ecm) dvbapiau (0E00@000000/0000/0098/40:23CAFFCB2C8B20177C9E9D4114B5B5 BF): rejected (19 ms) by cccam-1 (F/2/2/2) - SIS UK with 2DB
2018/10/20 21:16:02 047E1C53 c (dvbapi) Demuxer 0 restarting decodingrequests after 1 ms with 1 enabled and 0 disabled ecmpids!
2018/10/20 21:16:02 047E1C53 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 1808 ANY CHID PMTPID 1420 VPID 0064
2018/10/20 21:16:03 655D10E1 r (emu) Key not found: P 0098 00
2018/10/20 21:16:03 655D10E1 r (emu) ECM failed: Key not found
2018/10/20 21:16:03 14E21F04 p (cccam) cccam-1 configuration error!
2018/10/20 21:16:03 047E1C53 c (ecm) dvbapiau (0E00@000000/0000/0098/40:0D0175FC1A301862C08413C4133C18 6D): rejected (18 ms) by cccam-1 (F/2/2/2) - SIS UK with 2DB
2018/10/20 21:16:03 655D10E1 r (emu) Key not found: P 0098 00

my live log

[butchyboy]

i have opened webif but oscam is not appearring in the bottom left underneath extra,s

[butchyboy]

Hide/Reset Reader/User AU Address Port Protocol SRVID:CAID@PROVID Last Channel LB Value/Reader Online & Idle* Status
Server 2/2
Hide root OFF 127.0.0.1 0 server 0000:0000@000000 00:12:15
00:12:15 OK
Hide root OFF 127.0.0.1 0 http 0000:0000@000000 00:12:15
00:00:03 OK
Readers 3/3 (2 of 3 CARDOK)
Hide Restart emulator ACTIVE 127.0.0.1 0 emu 0098:0E00@000000 SIS UK with 2DB [MEDIA BROADCAST] no data 00:12:15
00:00:00 CARDOK
(1099 entitlements)
Hide Restart AFN ACTIVE 127.0.0.1 0 emu 0000:0000@000000 no data 00:12:15
00:12:15 CARDOK
(1099 entitlements)
Hide Restart Card_reader_1 ON 127.0.0.1 0 internal 0000:0000@000000 no data 00:12:15
00:12:15 OFF
(no entitlements)
Proxies 2/2 (1 of 2 online)
Hide Restart constant.cw ON 0.0.0.0 0 constcw 0000:0000@000000 no data 00:12:15
00:12:15 CONNECTED
Hide Restart cccam-1 ON 0.0.0.0 0 0098:0E00@000000 SIS UK with 2DB [MEDIA BROADCAST] no data 00:12:15
364d 23:59:58 ERROR
Clients 1/1
Hide Kill dvbapiau ACTIVE 0.0.0.0 0 dvbapi 0098:0E00@000000 SIS UK with 2DB [MEDIA BROADCAST] not found (20 ms) 00:12:13
364d 23:59:58 OK

my status in oscam.

[butchyboy]

getting a lot of ECM fail key not found in live log in oscam,not sure where to go from here guys...........................

[kegnkiwi]

You must leave on the channel for a duration, mine took five minutes others have said 30 mins, yours is an older box in might take longer. I don't know

[butchyboy]

You must leave on the channel for a duration, mine took five minutes others have said 30 mins, yours is an older box in might take longer. I don't know

ok will do,but if it don,t work im not sure whats left to try or do.

[Satcat]

Have a look in the oscam webif xxx.xxx.x.xxx:yyyyy
x = you boxes ip
y = httpport no (as in you conf file)

[butchyboy]

Have a look in the oscam webif xxx.xxx.x.xxx:yyyyy
x = you boxes ip
y = httpport no (as in you conf file)

whats the httpport ? :8888 ?

[butchyboy]

i have the oscam opened here with my boxs ip and :8888 at the end

[butchyboy]

had it left on the sis channels for well over a hour and nothing happening blank screen here,so i think i,m defeated.

[echelon]

I deffo struggled with it on my solo2 running BH

it either AU on 9e works for a short while and then freezes, or the oscam stops working or locks up and fails the webif login too

or it fails to AU

so I gave up for the time being

[JOE.MADDISON]

yes same on vuzero4k kept dropping lines and recr needed reboots to view channels, box also came up with no backup and needs reformatting,so have had to reinstall with usb re-scan ,load latest-oscam from plugins,and no problems with lines, so oscam-arm, and oscam-emu has been given a wide berth