PDA

View Full Version : Solution if your ISP is blocking MYTV, VOD, HTTP Upgrade on HitechBox



blackdevil
10-03-2019, 02:31 PM
Users cannot access MYTV, VOD, HTTP Upgrade. Internet providers block it.
Solution :
In HitechBox
Network / IP Settings / Address Settings / Mode Config --> set --> Static IP
Change DNS Server --> 001.001.001.001
You will see your router's IP now (192.168.1.1 - 192.168.1.254)
Press OK
DCHP/Bootp Server will set to --> 1.1.1.1

blackdevil
24-03-2019, 08:58 PM
Alternative DNS Servers:
1. OpenDNS
Primary: 208.67.222.222
Secondary: 208.67.220.220
2. Cloudflare
Primary: 1.1.1.1
Secondary: 1.0.0.1
3. Google Public DNS
Primary: 8.8.8.8
Secondary: 8.8.4.4
4. Norton ConnectSafe
Primary: 199.85.126.10
Secondary: 199.85.127.10
5. Comodo Secure DNS
Primary: 8.26.56.26
Secondary: 8.20.247.20
6. Quad9
Primary: 9.9.9.9
Secondary: 149.112.112.112

TonyO
06-11-2020, 11:08 AM
I couldn't get any of the Alternative DNS Servers:to work, where and how do you load the info in the menu please ?

JOE.MADDISON
06-11-2020, 12:46 PM
you load them into your router

TonyO
06-11-2020, 05:52 PM
How do you do that ? I've seen no instructions on loading that sort of info.

JOE.MADDISON
06-11-2020, 06:51 PM
USEyour brouser to log in to your router then,advanced then wan setup,you will need to input router password someware along the way,,,admin,,,,and *** depends on provider

johnhenry
06-11-2020, 11:34 PM
Turn on Hitech Box, go to Network then click on IP settings, then click on Address settings, set to static IP , then go down
to DNS Server and then alter to 001-001-001-001 then press ok and this will alter DNS server to read 1.1.1.1

As per blackdevils thread #1

TonyO
07-11-2020, 10:46 AM
I am already on the settings from post 1 on the 9200, its the router that needs sorting now as the IP restrictions are becoming the problem now.

Aldo
07-11-2020, 03:38 PM
Did you not get a user manual with your router, as that should give you the info and details on how to set your router, I have a vermin router and I type 192.168.0.1 to get access the the settings, maybe you could try that and see what you get.