ERT Biss channels

[satpaul]

Has anyone managed to get the ERT channels on 39 East in Biss on this receiver inputted code with frequency on a few patches had no luck got them when they were on 3 East :king-042:

[dog-man]

If you are referring to Ert Sports HD, Ert 1,2 & 3 all on 12224 - H - 13381.

I can get them all here in SE UK, very strong signals, but only ERT 3 clears.
All the others are not reported as encrypted but they all have black screens.

[Detlef]

oscamymod is your friend.

I can get them all on a Vu+Duo although I did have problems with the oscam.keys file location after changing to Black Hole.

As mentioned here
https://www.satpimps.co.uk/showthread.php?178727-BISS-with-OSCAM-EMU-Vix-image&p=984747&viewfull=1#post984747
I found that ymod seemed to be reading the key file located etc\tuxbox\config

Anyway, this is the relevant section from my oscam.keys file:
68939

ERT3 doesn't seem to be encrypted nor does ERT World. Also I never seen anthing clear of the other non-ERT channels in my file (above) but they are there 'just in case'.

[satpaul]

I mean On Spiderbox 6000

I can get it on any Enigma 2 Receiver or Technomate

Please only answer if you have a Spiderbox 6000

[Detlef]

I mean On Spiderbox 6000

I can get it on any Enigma 2 Receiver or Technomate

Please only answer if you have a Spiderbox 6000

As they are easy to get, I assume that it must be an emu problem (@dog-man) or channel data problem (@satpaul) so I listed all the parameters from my box.

Do you receive anything off 39E ? Note: all 5 ERT channels are in DVB-S2 QPSK even the SD ones.

[satpaul]

ERT 3 works just doesn't work when biss keys added correctly to the other 3 biss channels

[Detlef]

ERT World is FTA too.

What emu are you using? The only one I can get to work with BISS keys is oscam-ymodv18-56. It is something to do with the SID and the PCR PID needing to be included in the key ident, (a bit like ESPN Caribbean 901 and ESPN Syndication 902 on 15W, which fail as only one can be received using Cccam normally because their PIDs are all 000000.

[satpaul]

Do You have Spiderbox 6000 ?

[Detlef]

No, but it is the software that isn't working correctly on yours.

More importantly, what image and emu are you using?

One Linux box is pretty similar to another; for example I found solutions in the Black Hole forums when there was no information in the Vu+ ones.

[satpaul]

It not Linux No images

[Detlef]

This may give a clue to your problem. I was looking at the new Hellasat 39E channels and one of the encrypted Media Office channels is opening with a BISS key.

I did an internet search to find out what its sub name was and found this little gem:

The Media Office (39E) Biss Key
For a long time now FTA (Biss ended aprox 9/7/12):
10955 V SR 4444 3/4 DVB-S2/8PSK
11474 H SR 4444 3/4 DVB-S2/8PSK

Feed(SID:0001)(Media office) FTA (Note: my receiver shows this as encrypted)


NOTE: The signal behavior (on 10955/4444/V) can be odd with some receivers.
A little to much signal causes loss of the transponder.
If signal is reduced (not correct motor position or an in line attenuator) it will work.
(eg Technomate with MTI LNB & 1.06m Dish fine & clearly a very strong signal -but Spiderbox with same LNB & Dish see no signal)

{The above info was on _https://swsatone.com/the-media-office-39e-biss-key/}