channel master polarmount needed.

[butchyboy]

hi guys i know probaly a very long shot but would anyone have a polarmount for a channel master 1.8m offset dish?any help truly appreciated cheers.

[malsat]

I have one for a 1.2
where you at ?

[butchyboy]

I have one for a 1.2
where you at ?

pm sent m8,but oi feel your polarmount might be to small.

[satwyn]

you could use any offset polarmount with a modified backplate 1.2m channel master would work in a sheltered location 1.8m c/m is a heavy dish

[butchyboy]

you could use any offset polarmount with a modified backplate 1.2m channel master would work in a sheltered location 1.8m c/m is a heavy dish

i do have a very rugged and robust polarmount here from my irte 1.2m prime focus dish,but im told it will not work with a offset dish unless its modified as in you would need to extend its declination for more tilt is this correct?.

[malsat]

you could buy a pre made adaptor from 1.2 to 1.8 for CM ages ago but was expensive

[butchyboy]

you could buy a pre made adaptor from 1.2 to 1.8 for CM ages ago but was expensive

im after a offset polarmount that is strong and robust and i could home make a plate adaptor to fit the back of the cm 1.8m
or if its possible to mod my irte prime focus polarmount to work on my cm 1.8m offset that would be ideal,maybe some one on here knows if its possible to mod it as in the declination part on the irte polarmount to suit the offset 1.8m

[cosworth4x4]

@ butchyboy found the photos of genuine cm polar mount , and both dishes next to each other .

The difference in size is only .6 but it looks hell of a lot more and its the thickness that makes up the weight on it .

[butchyboy]

cheers cosworth,massive polarmount difference.......

[ManikM]

man thats a serious size difference, makes a 1.2 look like a childs toy.

[butchyboy]

i suppose theres no way of getting the dimensions of the original cm polarmount for the 1.8m offset dish cause could get one welded up.

[bnc]

That's shocking how much bigger the 1.8 M is, Never thought it would be that much difference.
I bought my Channel Master 1.2 in 1993 as I couldn't afford the extra for 1.8 at the time, after see the pictures of them together I'm glad I didn't get the 1.8 it would have been too big for my location.

[cosworth4x4]

i suppose theres no way of getting the dimensions of the original cm polarmount for the 1.8m offset dish cause could get one welded up.

Sold it a few years back , don't have the guys details sure he was from Newport South Wales he maybe on here not sure.

[butchyboy]

Sold it a few years back , don't have the guys details sure he was from Newport South Wales he maybe on here not sure.

cheers m8,suppose emailing dave at SSS for demensions details would be a complete waste of time LOL

[satwyn]

6935969359

[satwyn]

some cband lnbs feeds and scaler ring pictures for butchyboy to look at in my last post will post to you when you sort postage

[cosworth4x4]

cheers m8,suppose emailing dave at SSS for demensions details would be a complete waste of time LOL

:smilielol5:

[butchyboy]

some cband lnbs feeds and scaler ring pictures for butchyboy to look at in my last post will post to you when you sort postage

sent you pm with my email address satwyn :)

[butchyboy]

69362

[butchyboy]

69363

[butchyboy]

69364

[butchyboy]

69365

[butchyboy]

hi all i have attached pics of a polarmount that looks like the cm 1.2m polarmount,but this one is a friends polarmount and its way more robust and heavey duty he uses it on hes 2M dish.
wonder if i could get one made up like that would it work,i see no problem why it would not work.any taughts?.

[satwyn]

looks exactly like the 1 at the back of my 1.2m c/master but could be wrong

[butchyboy]

looks exactly like the 1 at the back of my 1.2m c/master but could be wrong

it is but its a more heavey duty made polarmount to accomodate for my friends 2m dish,i have no doubt it would be fine on my cm 1.8m but would need to get one made up like it.

[butchyboy]

how about this would it suit says up to 2m
_https://www. eabay .co.uk/itm/Universal-Polar-Mount-Az-El-for-Big-satellite-dishes-1-2-to-2M-SALE/233469566452?hash=item365bdeddf4: g:rPUAAOSwe-teHxU0#shpCntId

[butchyboy]

how about this would it suit says up to 2m



probaly would not be robust or strong enough for my cm 1.8m which i think weighs about 35 kilos.the search continues :(

[butchyboy]

hi guys would anyone with this polarmount from the cm 1.8m offset dish be able to send me pictures and dimensions of the whole polarmount lentgth of steel and diameter etc
i really could do with your help as im going to fabricate one myself,but need the length diameter etc of the steel involved.

[mm]

Hi butchyboy,
I replaced a channelmaster 1.2 with a 1.8 on an existing mast and so i had a new bracket fabricated. This enabled me to mount the original 1.8 polar mount onto the mast / post.
I can take some pics if you need some type of direction.
Mark

[cosworth4x4]

Hi butchyboy,
I replaced a channelmaster 1.2 with a 1.8 on an existing mast and so i had a new bracket fabricated. This enabled me to mount the original 1.8 polar mount onto the mast / post.
I can take some pics if you need some type of direction.
Mark

Upload them if you want :respect-055:

[butchyboy]

Upload them if you want :respect-055:

its a fixed mount m8,mm sent me pics via email.

[Dean sat]

There’s a dealer in Bristol that got them £619.95
All the best Dean.