PDA

View Full Version : ipk file .



satfred
13-09-2022, 08:39 AM
Hi guys looking to up load an ipk file to my vu+duo 4k se. The easy way .Tryed using vucc no luck .

hda5
13-09-2022, 09:11 AM
Option 1, using VuCC:

FTP the ipk file to the /tmp folder on the Duo4K.

Telnet into your box and type the following three lines...


cd /
opkg install /tmp/the_filename_of_your_ipk_file.ipk
reboot


Option 2:

You can also use the "Install local extension" from the Duo4K menu. You'll have to find that option in the menu, it's in different places, depending on the image installed.
Just FTP the ipk to the /tmp folder, first. Then you can use "Install local extension" from the Duo4K menu.

Mickha
13-09-2022, 09:30 AM
You can access the Manual install IPK files by pressing the green button, followed by the Yellow Button, on your remote, after doing what hda5 says, by transferring the .ipk file, to your tmp folder.
You can use the VU+ Control Centre, or just download Filezilla, which is free, or other FTP program.

satfred
13-09-2022, 03:07 PM
Sorry guys struggling with this using open vix .Need a step by step guide ipk to vucc .

Mickha
13-09-2022, 03:37 PM
VUCC = VU+ control Centre, you just need the FTP program.
You can either open the VUCC, login, and click the FTP option, or download Filezilla, a free FTP program, and then login, to your VU+.
To transfer the .ipk file, to your VU+ receiver, you use the FTP program, once connected you can see your PC files, in the left panes, and your receivers files, in the right panes.
You drag the downloaded .ipk file, from your PC, into the tmp folder, right lower pane.
You then go to your receiver, press the Green button, on your receivers remote control, then the Yellow button, and select manual install of IPK files.
69625

It would help if you told us what you're trying to install, as .ipk files aren't used that much, anymore, since most things can be downloaded using the plugin options.

hda5
13-09-2022, 04:15 PM
Here's a full step by step guide using VuCC.

Launch VuCC
Press the FTP button
Double click on the tmp folder on the right pane, as shown in the image below. Click on the image below for a bigger picture.
69629

Then select the ipk file from your local hdd, on the left pane and drag it across to the tmp folder on the right pane.

On Vix, pressing the green and yellow button isn't an option.
Instead, press menu -> setup -> ViX to locate the "Install local extension" option.

Click on the images below for a larger picture of the procedure from the menu.
69626 69627 69628

Once you're on the "Install local extension" screen, you'll see your ipk file in the list.
Select the ipk file and press the green button to install it.

69630

satfred
13-09-2022, 05:04 PM
iptv app.

hda5
20-09-2022, 09:24 AM
Just checking, did you manage to set it up okay, Fred, using the instructions above, or are you still struggling?

Which IPTV app is it you're installing?

satfred
22-09-2022, 07:33 PM
Hi there don,t no what i have done but Dcc will not connect,to telnet ,also vucc is the same checked ip address none will connect,trying to download app.

hda5
22-09-2022, 07:55 PM
Check the IP address in the Network menu, on your box. It might have changed, if you have DHCP enabled.

Other things to know...

Have you set a password on your box?

On the newer images you can't FTP to the box unless you've set a password, first.

If you haven't set a password, you'll find the Password option in the Network menu, on the Vix image.

What is the name of the IPTV plugin you're trying to install?

satfred
23-09-2022, 09:28 PM
Hi Xstreamity is the app.

hda5
24-09-2022, 08:53 PM
You can install the Xstreamity app from the plugins menu on ViX.

Press Menu button on remote, then -> Plugins -> Green Button -> Extensions -> Xstreamity

69636

Click the image for bigger picture.

This will get the Xstreamity app installed on your box.

satfred
26-09-2022, 04:09 PM
Hi all thanks guys for your help manage to install xstreamity.

hda5
26-09-2022, 08:21 PM
Excellent! Glad to hear you got sorted, Fred.