sat_rrstm
03-12-2006, 12:00 PM
Hi voith!
Since things with biss handling in Humax has changed,could you please replace my instructions up in the stickies with the following text :
We usually get a biss ch. codes in this form:
NBA TV . Index: 1F FA .HEX key: 18 39 6D EC 81 A6 25 C0 (8 sets,16 digits)(this key is not the real one).
We need now the ch-ID in its heximal form(ch-ID of NBA is 4 and turns to 0004 in this case)
+ its PMT PID which is 32 and turns to 0020(we need only the last 2 digits)
+ its PCR Pid which is 8187 and turns to 1FFB (we need only the last 2digits).
So the first 8 digits of the biss key-line are : 0004 20 FB.
Out of the 8 key-sets we skip the 4th and the 8th ones,so here is what is left:18 39 6D 81 A6 25,
and here is the complete key-line : 000420FB18396D81A625.
Using the remote we go to : Menu --> TOH --> Parser --> Ram Editor -->OK
Press P+ or P- till you see BISS-FIXED DCW screen or Press only the 'musical note' button (for radio ch's)
Go to an empty line : 00000000000000000000>Press OK. Insert the 20 digits-->Press OK.
We exit all menus and then press STANDBY on the BOX to store.
If we wish to delete a biss key line,first we flash it and then we press
instantly STANDBY button on the remote 4-5 times.
If we'd like to delete 2 key lines at the same time after flashing the first one
we keep pressed almost any button,except 'recall' button,for about 4-5seconds!
Since things with biss handling in Humax has changed,could you please replace my instructions up in the stickies with the following text :
We usually get a biss ch. codes in this form:
NBA TV . Index: 1F FA .HEX key: 18 39 6D EC 81 A6 25 C0 (8 sets,16 digits)(this key is not the real one).
We need now the ch-ID in its heximal form(ch-ID of NBA is 4 and turns to 0004 in this case)
+ its PMT PID which is 32 and turns to 0020(we need only the last 2 digits)
+ its PCR Pid which is 8187 and turns to 1FFB (we need only the last 2digits).
So the first 8 digits of the biss key-line are : 0004 20 FB.
Out of the 8 key-sets we skip the 4th and the 8th ones,so here is what is left:18 39 6D 81 A6 25,
and here is the complete key-line : 000420FB18396D81A625.
Using the remote we go to : Menu --> TOH --> Parser --> Ram Editor -->OK
Press P+ or P- till you see BISS-FIXED DCW screen or Press only the 'musical note' button (for radio ch's)
Go to an empty line : 00000000000000000000>Press OK. Insert the 20 digits-->Press OK.
We exit all menus and then press STANDBY on the BOX to store.
If we wish to delete a biss key line,first we flash it and then we press
instantly STANDBY button on the remote 4-5 times.
If we'd like to delete 2 key lines at the same time after flashing the first one
we keep pressed almost any button,except 'recall' button,for about 4-5seconds!