Hustler

[gazboy]

What do i ned to get Hustler? Got hummie 5400Z latest patch

gazboy

[Marco]

thats it, you should be ok m8 . 5e 12111

[roy37]

they have not changed anything in the last few months :D

[gazboy]

I have not had it for the past few months??
Do i need an old bin file?? If so can someone put me in the right direction?
cheers.

gazboy

[voith driver]

hi gazboy,
it might be the way you search in google, try the search terms satellite upload and download and even centre, you aught to get some hits
voith

[gazboy]

Thanks Voith
But no luck on any uploads/downloads. Do you think the latest pmc table would help pet?? If so where do i find them??

Gazboy

[voith driver]

hi gazboy,
no, i am running the very latest toh 3.4 hot 7.7 which has no pcm in it, and i was opening both of the hustlers after 2000hrs.
which i found the same way
regards
voith

[gazboy]

Hi Voith
Did you get my pm??

gazboy

[gerryl]

hi gazboy,
no, i am running the very latest toh 3.4 hot 7.7 which has no pcm in it, and i was opening both of the hustlers after 2000hrs.
which i found the same way
regards
voith

on hotbird or Astra!...or elsewhere?:confused:

[voith driver]

hi gerryl,
on sirius m8, as marco said, don't know about the others, i only look for them when someone asks
voith

@gazboy, yes m8, you should have the result

[gazboy]

Yes Voith got them cheers!!
gazboy

[gerryl]

hi gerryl,
on sirius m8, as marco said, don't know about the others, i only look for them when someone asks
voith

cheers Voith...as if I need another channel!...the old thing with this game ye think yer missin' something!...Rgds Gerry

[gazboy]

@Voith
It seems i have to use cantone3.0 to enter the key bin,as i have not used it before and cannot find and instructions could you point me in the right direction?
Thanks.

gazboy

[thecat]

dont understand .. i had hustler ... read about catone 3 so put it in the hummy...now i cannot get anything to clear ... tried putting in 3.4 7.7 again and a new bin flie but no luck any idea what have i done wrong ?

[thecat]

sorted it ....rembered to try swithing of the hummy and removing the card .. it worked . sorry for writing the above i should of known better.

[gazboy]

Not a lot of help cat!! You could say the cat got the dog??

gazboy still wth nothing!

[voith driver]

@gazboy,
catone 3 is included in the new patch, but you do not need to manually put the keys in get the latest bin and put it in with dsr9500 5.6cw

did you use both the files i sent you

but if i get a tutorial i will post it
voith

[gazboy]

Thanks Voith did you get the Es*** joke i sent you? Nothing personal!

gazboy

[voith driver]

not come in yet

[gazboy]

@Voith
I have down everything you mentioned but cannot put the key bin in!!
Nothing in the providers!! It seems to be downloading but get nothing???

gazboy

[cuzz]

load 3.4 7.4 with cypt provider first

[voith driver]

hi gazboy,
first can you check your card, take it out then put it back in, it should show card extracted, then card accepted, i assume it already has an old 6/1 file on it.

what sort of null modem lead are you using is it a shop bought fully wired one, or is it a hand made 3 wire job???? can you confirm that the new patch you have put in has actually gone in. also can you confirm that you have used this null modem lead to input bins before.


are you using dsr9500 5.6cw to put the bin in, as the new bins will not go in with earlier dsr's

can you confirm that you have reloaded your channel settings, (to clear the bin) this is the sure fire way to clear any hangups in loading the bin.

sorry this is a longish list just trying to think of everything that might concievably cause problems
voith

[gazboy]

Thanks again Voith!!!
Once again tomorrow i will try in the morning.

Gazboy

[gazboy]

@Cuzz
Tried 3.4 7.4 with crypto with no luck!

@Voith
Card is working, null modem cable can download toh so thats working, using
DSR 5.6 have loaded the channel settings three times.


Gazboy

[gazboy]

I have got it sorted!!!!
I changed the channel settings again but to no avail and then i checked the config and it reverted back the card again so i simply put it on card+ emu and bingo!! I tried this before but nothing happened1 It must have been the change of channel settings,
Anyway THANKS for all your help lads.

And a very merry xmas to you all!

gazboy

[cuzz]

glad you got sorted.!!!

[voith driver]

hi gazboy,
well done m8, as i said in the other post reloading the channel settings,( with either humbox 4.1 or hnfsmart) usually clears the bin ready for use,then changing caid to card+emu(as loading new channel settings always sets it back to card) then load a new bin usually sorts it out.

well done m8, perserverance pays off
voith