Humax ToH3.4 HoTplugged v7.8 - TP$ Fix

[oulit]

Humax ToH3.4 HoTplugged v7.8 - 2006-12-24
-- Version: A --
============================
- TP$ Fix

TP$.BIN can be loaded via hdfbin-3-006000.raw
(that raw can't be bigger then 0x9EFF bytes!)
time must be set correct (GMT) to get right TP$-key


(no PMCT included)

thanks to ToH/HoT team

[zad]

yes but still no tps bin....

will have to wait for that before this firmware is useful....

we may have tps again after the chrimbo but i would expect a new bin daily, similar to the ss2 vplug plugin

[oulit]

hdfbin-3-006000.raw = daily TP$.bin from pionner and vplug
just remove leading zero bytes to keep the file =< 39,7 KB (40 704 bytes)

[joe9]

works on my 5400 ok

[Prontopro]

I can confirm as well that it works fine. I only had to move the clock forward an hour to get the picture.

[ghalqa]

I only need to upload the new toh 7.8 or do I have to upload the new keybin. Where can I upload this new keybin???

[Benn_Black]

hdfbin-3-006000.raw = daily TP$.bin from pionner and vplug
just remove leading zero bytes to keep the file =< 39,7 KB (40 704 bytes)

Remove them how and where is the hdfbin-3-006000.raw file?

[oulit]

1-unpack ToH3.4_HoT7.8.hdf using hdftool or HDFSmart
command: hdftool u ToH3.4_HoT7.8.hdf
2-use a hex editor to make tps.bin =< 39,7 KB (40 704 bytes)
3-rename it to hdfbin-3-006000.raw
4-pack *.raw back to hnf using hdftool
command:hdftool c ToH3.4_HoT7.8.hdf -id1=0016.0000 -id2=0016.0600

[Prontopro]

The current keybin embedded in the file works today. Does anyone know at what time it changes? Is it midnight?

[oulit]

embedded keybin UP to 25/12/06 04:14:00
time must be set correct (GMT)
for example:
casablanca citizens have to set their clock to GMT+1

[vjanda123]

I set time to GMT + 1 and Multivision1 - 6 work fine.
However, other channels in package like TPS Star, TPS Foot etc are down.

Any ideas?
thx

[Prontopro]

I set time to GMT + 1 and Multivision1 - 6 work fine.
However, other channels in package like TPS Star, TPS Foot etc are down.

Any ideas?
thx

Check your settings as they might be out of date. I'm watching Harry Potter and the Prisoner of Azkaban on TPS Star right without any problems.

[EDGE]

thanx oulit,working ok

[vjanda123]

Hi, I'm new so excuse my ignorance :)

When you say settings, what do you mean?
.bin file or pmct file or something different

Thx

[EDGE]

channel settings,maybe?

[vjanda123]

all sorted,
PMCT_Hot7.5_VH1classic fix.csv did the trick :)

merry xmass to all

[abdou0058]

thanks oulit,working fine

[transit]

I have tried this patch and it works fine, but I am concerned that it has an OTA loader included.. this is not usually found in PH patches!! Hope it's not a time ****.

[Marco]

http://humax.roliaforum.com/modules/news/



Marco

[nilic]

I think it is down now.. anyone confirming??

[FBOY]

I think it is down now.. anyone confirming??
The tps bin expired at 25/12/06 04:14:00, so yes it should be gone.

[norge]

I can confirm that too....So we need an update each day...is it a normal key bin?

[isiscat]

hi,

can you explain please i put file in hdfsmart but i don't know what to do now ,

which hex editor should i use ?

kind regards,

isiscat

[norge]

Just apply the whole firmware that is what I did and it was open yesterday.

[isiscat]

yes,

but now it's black

regards,

isiscat

[maxhum]

See what Crazysat says abouth this firmw.: verified: ToH3.4_HoT7.8.hdf
New original full version ToH3.4_HoT7.8 by Planet Hemp & ToH-HoT team is out.

Code:
ToH3.4_HoT7.8.hdf
file CRC: 710C6497
file MD5: 7874f8cff0b60c0ef6b9aa9e3276d712


Thank you PH Smile


_________________
Regards ... Saluti ... Gru&#223;

CrazySat Thanks **** babysnake and hot team<<.

[lonewolfe]

"Through that OTA LOADER they can do what they like and even send a killer command to your humax"
i stick on hot v. 77 (take no risk.) and see what Crazysat says abouth this firmw.regards

That loader has raised a few eyebrows, around the place. :confused:
Perhaps a safe rather than sorry course might be best.... for the moment, anyway.

[norge]

Is there a way to delete that loader may be by reverting to an earlier toh?

[oulit]

the OTA LOADER section containe only daily tps keys. :)
download new tps.bin Upto 26-12-2006 04:14:00
1- first step reducing file size remove remaining zero
keep only =< 39,7 KB (40 704 bytes)
hex editor : ultraedit or winhex
2-rename you new edited tps.bin to hdfbin-3-006000.raw
3-create new directory , put only hdftool.exe and hdfbin-3-006000.raw
3-open console and run this command:
hdftool c dailykey.hdf -id1=0016.0000 -id2=0016.0600
4-use HDFSMART to be sure that your file doesn't contain errors

[fankoosh]

hi every one ,my new fix is out there , u can load it by Hdf.uploader

& watch tps "fankoosh Tps ok upto 261206"

[norge]

the OTA LOADER section containe only daily tps keys. :)
download new tps.bin Upto 26-12-2006 04:14:00
1- first step reducing file size remove remaining zero
keep only =< 39,7 KB (40 704 bytes)
hex editor : ultraedit or winhex
2-rename you new edited tps.bin to hdfbin-3-006000.raw
3-create new directory , put only hdftool.exe and hdfbin-3-006000.raw
3-open console and run this command:
hdftool c dailykey.hdf -id1=0016.0000 -id2=0016.0600
4-use HDFSMART to be sure that your file doesn't contain errors

thanks for your help but some are not experts on this manipulation of keys...
I managed to edit key bin and rename it..then what else?

[isiscat]

hi,

where is the new fix then ?

regards,

isiscat

[EDGE]

hi every one ,my new fix is out there , u can load it by Hdf.uploader

& watch tps "fankoosh Tps ok upto 261206"

thanx fankoosh

[norge]

Thanks a lot!!
I would like to know however, how to pack the renamed decreased raw file to hdf

[Mardavia40]

hi every one ,my new fix is out there , u can load it by Hdf.uploader

& watch tps "fankoosh Tps ok upto 261206"

Thanks works great kids watching Harry Potter now, again a
big thank you Fankoosh and merry christmas to you.

[McDude]

Thanks a lot!!
I would like to know however, how to pack the renamed decreased raw file to hdf

It's already in hdf format ;)

[norge]

I know..mine is open too but would like to know how to do this...Which software? with hdf tool 1.12..I cannot do it with it.

[oulit]

I know..mine is open too but would like to know how to do this...Which software? with hdf tool 1.12..I cannot do it with it.

open console ,and run this command
this will pack hdfbin-3-006000.raw file in the same directory to a new hdf file

hdftool c dailykey.hdf -id1=0016.0000 -id2=0016.0600

[norge]

What is console? A software?

[roofer32]

its available by a easy google search. want info and cant get it, then email or pm me for details.

[gery]

What is console? A software?

its a command prompt in the directory

[norge]

Thanks to you all....Managed to create one!!

[totothehero]

Hello everybody and thanks for all the explanations and in particular those from outlit. I well understand the procedure (I think) but the only keybin files I found had a size of 4 KB (4096 bytes) but not bigger than 40 KB as Outlit suggested it. Am I wrong but as these files are too small (to my opinion) to contain the AES for a whole day I do not think it should be a good idea to pack them to hdf and send the result to humax. Can someone tell me if I am wrong or not ?
Thanks again (and in particular to those publishing files at 4 o'clock in the morning !)

[suniltom]

Thanks fankoosh, you are the MAN...................

[oulit]

totothehero
search for tps.bin , not key.bin

[awe3s]

I'm bit lost here, I loaded the firmware 7.8, but now want to load the bin file (which is in hdf format, Fankoosh one). If I use Humax uploader or wdn4oak, nothing happens it is black screen. Can you guys please advice as the fotie is about to start.... :-) cheers guys

[leonard968]

@awe3s
Make sure your clock is set to GMT +1

[ceyer]

And remember that you&#180;ll have to change it everyday now :-(

The recent one is this one: fanko Humax Tps upto 271206.zip

[rayanis]

is this only for the 5400 or does it work on different models?

[scrotty]

OK, so let me see if I'm reading this right...

1. Update to ToH3.4 HoTplugged 7.8
2. Set clock to GMT +1
3. Upload latest Fankoosh HDF file

Should this then open up TPS or am I missing a step cos everything is staying black for me...

[oulit]

scrotty
upload also pmc table, and key.bin

[norge]

Be sure to set configuration settings to card+emu

[scrotty]

scrotty
upload also pmc table, and key.bin

Can I just use a 'standard' key.bin file or do I need to go through the editing process described earlier?

You'll have to excuse the dumb questions - I've not used my Hummy for nearly a year now :rolleyes:

[hfathollahi]

I tried HOT7.8 for the first time last night and it worked perfect .
Thank you so much HOT team for the great work .

[maxhum]

Thanks Fankoosh for fast update m8.
also found:

Humax AES v10
A new tool coded by our friend TooHot for OTA
Thanks to CrazySat nostromo humax-zone.net and ToH HoT guys

1- Put tps.bin (must be 65536 bytes long) into main folder

2- Run RUN_ME.bat

3- Send to your IRCI-5400/5400Z/+ ---> Humax_AES.hdf with HDFSmart v1.8
checking OTA-Loader box

It should work.

Enjoy!

TooHot

[Marco]

another nice hummy utill

just tried this one

:cool:

[aanfield]

Humax ToH3.4 HoTplugged v7.8 - 2006-12-24
-- Version: A --
============================
- TP$ Fix

TP$.BIN can be loaded via hdfbin-3-006000.raw
(that raw can't be bigger then 0x9EFF bytes!)
time must be set correct (GMT) to get right TP$-key


(no PMCT included)

thanks to ToH/HoT team
sorry but can some1 please tell me were this file is thanks

[norge]

Are there any keys for today? Or something else has changed?

Thanks

[FBOY]

There is a new tps.bin available (needs it everyday from now on.)

[scrotty]

There is a new tps.bin available (needs it everyday from now on.)

Have you seen the latest file? All my usual sites aren't carrying one yet :frown:

[voith driver]

hi aanfield,
try in the firmware section

[kmcee]

great tool Bininabox can send .raw to hdf from any vplug.bin


cheers

kmcee

[aanfield]

hi aanfield,
try in the firmware section
sorry voith but carnt seem to find firmware section i think all that vodka as pickled mi brain

[McDude]

sorry voith but carnt seem to find firmware section i think all that vodka as pickled mi brain

There isn't a firmware section here and no files are posted in any part of the forum :)

I think voith thought he was logged into toes forum :D

[aanfield]

thanks mcdude i though i was going nuts ill get it from there cheers

[voith driver]

arrggggggghhhhh
sorry m8, can't keep track of where i am, i keep bouncing from one to the other
voith

[seadragon]

i got it working.
just in time for the footy.

thanks guys

[freebe]

Hey voith !! are you getting older like me :D

[voith driver]

i reckon i am m8, happy new year:D

[TheRipper]

Guys, I'm really stuck over here...

* I have uploaded 7.8 using HDFSmart
* Then I have uploaded fanko Humax Tps upto 301206
* Then I have uploaded a humax key bin hot 7.8 29-12-2006 and then checked to see if the keys were there (possitive)
* Set my Hummy clock to gmt+1
* Set it to card+emu
* Left a TPS channel on for more than a minute

and I cannot clear any channel...

Any tips before the Arsenal kicks off??

Thanks

[Mardavia40]

Daily files only last until 4am then go dark, you need today's
files for 31/12/06 and not 30/12/06 now no good.

[scrotty]

Is there a new file out yet? I've not found one on my usual sites.

[dave.tv]

there is no file yet, the very time the file is needed ( for the footie)and none to be found, ffs......

[scrotty]

there is no file yet, the very time the file is needed ( for the footie)and none to be found, ffs......

Yeah, watching Premiere but the games are rotating every 5 mins or so :frown:

[TheRipper]

Ok thanks guys, waiting for the new file then...or else it's streaming...

[scrotty]

Fantastic - the file has just been released as the final whistles have just blown :frown: